Emplois “Aircraft tooling” au Canada – Page 2

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 11h

  Technical Expert – Flight Control Laws Design & Development

  Québec, QC

  Temps plein

  UT

  UNIZON Taskforce Technology

  10+ ansCandidates need an aerospace engineering degree (PhD preferred) and at least 10 years of flight control law development on Fly-By-Wire aircraft. They also need strong MATLAB, Simulink and C++ skills, knowledge of DO-178B and SAE ARP4754, and fluency in French and English.

  MATLAB, Simulink, C++

  12h

  Senior Professional – Human Factors Engineering, Flight Deck Design

  Dorval, QC

  Temps plein

  UT

  UNIZON Taskforce Technology

  10+ ansCandidates need about 10 years of human factors or cognitive ergonomics experience, an engineering or science bachelor's plus ergonomics, psychology or industrial design background, and aerospace experience. English is required and French is an asset.

  Ergonomics, HMI, Documentation, Regulatory compliance, Industrial design, Decision making

  13h

  Software and Hardware Senior Engineering Specialist

  Dorval, QC

  Temps plein

  UT

  UNIZON Taskforce Technology

  15+ ansCandidates need a bachelor's degree in an engineering field, 15+ years of engineering experience (10+ in aerospace) and 5+ years of FPGA, ASIC or embedded software work in aerospace. They must know aerospace certification standards and be an active OIQ member.

  DOORS, JAMA

  14h

  Professional Senior Engineer – Avionics Systems

  Dorval, QC

  Temps plein

  UT

  UNIZON Taskforce Technology

  Candidates need a bachelor's degree in an engineering discipline and extensive avionics design and certification experience. Knowledge of FAR Part 25 or CS-25, DO-178, DO-160, DO-254, ARP4754 and ARP4761 is required, plus experience with Transport Canada, FAA or EASA.

  Control systems, Communication skills, Regulatory compliance, Inspection, Civil aviation regulations, Assembly

  14h

  Senior Engineering Professional – Fly-By-Wire (FBW) & Secondary Flight Control Systems

  Dorval, QC

  Temps plein

  UT

  UNIZON Taskforce Technology

  7+ ansCandidates need a bachelor's degree in mechanical or aerospace engineering and at least 7 years in aerospace. They need direct experience certifying a fly-by-wire or secondary flight control system, plus working knowledge of Part 25, ARP4754 and MATLAB/Simulink. Fluency in English and French is required.

  MATLAB, Simulink, Stateflow, ADAMS, CATIA, Microsoft Office

• 11h

  Continuous Improvement Specialist

  Windsor, ON

  Temps plein

  A

  AAR

  5+ ansCandidates need a bachelor's degree in industrial engineering or a related field, or equivalent experience, plus at least 5 years leading improvement projects in operations, preferably in aerospace. Strong data analysis, project management and advanced Microsoft Office skills are required.

  Excel, Word

• 11h

  Senior EMC Specialist - Aircraft Certification

  Toronto, ON

  Temps plein

  I

  Infotel

  8+ ansInfotel needs a candidate with a degree in electrical engineering, engineering sciences or physics, at least 8 years of EMC experience and 4 years in aerospace EMC certification. Knowledge of RTCA/DO-160, SAE ARPs, FAA, EASA and TCCA rules is required.

  Electromagnetic simulation tools

• 11h

  Aviation NDT Inspector

  Winnipeg, MB

  Temps plein

  TS

  TABAQ Smart Aerotech Manufacturing Inc.

  3+ ansTABAQ Smart Aerotech Manufacturing needs at least 3 years of NDT experience, CGSB Level II in Eddy Current and ideally other NDT methods. Candidates also need knowledge of corrosion, Transport Canada standards, technical drawings, reporting skills and a valid driver's licence.

  Eddy Current equipment, Ultrasonic equipment

• 12h

  Aircraft Maintenance Engineer

  Calgary, AB

  Contrat

  SA

  Saxon Aerospace

  5+ ansCandidates need 5+ years of experience on the CL 215, with the knowledge of an aircraft mechanic, structures technician or avionics technician. A TC AME license is preferred, along with strong attention to detail, safety awareness and the ability to work independently or in a team.

  power carts, lifts, ground support equipment

• 12h

  Person Responsible for Maintenance (PRM) / Director of Maintenance (DOM)

  Mississauga, ON

  Temps plein

  AA

  Aeropol Aviation Services

  6+ ansAeropol needs a candidate who meets Transport Canada PRM eligibility, with at least six years of hands-on or supervisory aviation maintenance experience and aviation MRO management experience. Strong knowledge of CARs Subparts 571 and 573, AMO requirements and quality assurance is required.

  Team leadership, Process improvement, Regulatory compliance, Civil aviation regulations, Inspection, Documentation

• 13h

  Aircraft Maintenance Technician, AME M2 / ACA Mechanic

  Petawawa, ON

  Temps plein

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  Candidates need an AME M2, ACA or MRA licence, or an equivalent military or Transport Canada qualification, plus hands-on aircraft maintenance experience and a pre-flight mechanics diploma or equivalent. They must be eligible for Controlled Goods Program registration and for Government of Canada Reliability Status and Level 2 (Secret) clearance.

  DRMIS

• 14h

  Maintenance Manager / PRM

  Canada

  Temps plein

  AA

  Aspen Air Charters

  5+ ansCandidates need a valid Transport Canada AME licence with M1 required (M2 an asset), and preferably 5 years of licensed experience. Experience with Piper Navajos or similar light twin piston aircraft and strong piston engine knowledge is needed, along with clear communication and a clean record.

  Microsoft Word, Microsoft Excel, Microsoft Teams, aviation-specific software

• 14h

  Aircraft Maintenance Technician

  Montréal, QC

  Temps plein

  JA

  JMC Aviation

  Candidates need prior avionics technician experience in business aviation or aircraft maintenance, with hands-on work on business jets. Knowledge of aircraft electrical, navigation, communication and flight management systems is required, and a Transport Canada AME-E licence is an asset.

  avionics diagnostic tools, avionics testing equipment, aircraft wiring diagrams, maintenance manuals

• 15h

  Central Planning Process & Tools Analyst - Planning & Manufacturing Engineering

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ ansCandidates need at least five years of analyst or project management experience and a bachelor's degree in operations management, business administration, engineering or a related field. Bombardier also requires strong stakeholder management, analytical rigour, process improvement experience, fluency in French and English, and proficiency in Excel, Power BI, PowerPoint and Visio.

  Excel, Power BI, PowerPoint, Visio, ERP systems

• 16h

  Agent.e Méthodes - Structure

  Montréal, QC

  TélétravailTemps plein

  

  SOGECLAIR

  5+ ansCandidates need a DEC or university degree in mechanical engineering or aircraft manufacturing, plus 5 to 8 years of aerospace methods or production support experience. They must read technical drawings well, know metallic or composite assembly processes, and be fluent in French and English.

  Logiciels utilisés en environnement aéronautique

  16h

  Agent.e Méthodes - Structure

  Montréal, QC

  Temps plein

  

  SOGECLAIR

  5+ ansCandidates need a DEC or university degree in mechanical engineering or aircraft manufacturing and 5 to 8 years of methods or production support experience in aerospace. They must read technical drawings well, know metallic and composite manufacturing processes, and be fluent in French and English.

  Outils informatiques aéronautiques

• 17h

  Process Technicians Wash/Ovens - Afternoon Shift

  Oakville, ON

  Temps plein

  

  RTX

  1+ ansCandidates need a high school diploma and at least one year in a similar process or production role. They must show they can work cross-functionally and be eligible to work in Canada under ITAR and CCGP.

  Manufacturing processes, Cleaning, Process improvement

• 17h

  Machinist

  Montréal, QC

  30,73–51,21 $/h

  FA

  FTAI Aviation LLC

  Candidates need a completed DEP, DEC or ASP in machining or an equivalent, and must read English instructions. Experience with CAD/CAM, repair or overhaul work, or tool rooms is a strong asset.

  CNC lathe, milling machine, grinding equipment, SurfCAM

  17h

  Machinist - Tooling

  Montréal, QC

  FA

  FTAI Aviation LLC

  Candidates need a completed DEP, DEC or ASP in Machining or equivalent, plus toolroom experience with both CNC and conventional machining. Red Seal, CAD/CAM skills in SurfCAM, and aerospace or precision manufacturing experience are assets. Candidates must read technical drawings in English.

  CNC mill, CNC lathe, grinder, SurfCAM, micrometer, caliper

  1j

  Senior, Vendor & Repair Management Specialist

  Montréal, QC

  FA

  FTAI Aviation LLC

  5+ ansCandidates need a bachelor's degree in supply chain, business or a related field, and 5-10 years in industrial or aerospace roles. They also need strong communication in English and French, Microsoft Office skills, procurement tool experience, and knowledge of engine repair cycles (an asset).

  Microsoft Office, Excel

  1j

  Facilities & Operational Support Intern

  Montréal, QC

  FA

  FTAI Aviation LLC

  FTAI Aviation needs candidates currently enrolled in an engineering, facilities management, occupational health and safety, or business program, available for the full four months. Candidates need Microsoft Office skills, analytical and organizational ability, and intermediate English.

  Excel, Word, PowerPoint, Teams, CAD software, Maintenance management systems

• 1j

  Station Manager, Halifax (YHZ)

  Goffs, NS

  Temps plein

  

  Porter Airlines Inc.

  10+ ans2+ gestionPorter Airlines needs candidates with at least 10 years in customer service or ground handling and 2 years of leadership or management. They must lead under pressure, manage resources and people, communicate clearly in writing and speaking, and work flexible and irregular hours.

  Teamwork, Leadership, Coaching, Administrative support, Corporate social responsibility, Scheduling

• 1j

  Technicien (ne), Opérations RH - HR Operations Technician

  Montréal, QC

  Sur placeTemps plein

  

  AJ Walter Aviation: AJW Group is a world-leading independent component parts, repair and supply-chain solutions provider, transforming efficiency in commercial,…

  3+ ansExcellentes habiletés de communication en français; Sens de l'organisation et rigueur administrative; Capacité à gérer les priorités et les échéances

  HR information systems

• 1j

  JOURNALIER/ERE DE PRODUCTION - COUTURE ET FINITION - temp 6 mois

  Montréal, QC

  Temps plein

  LI

  LUXIA INC

  DEP en couture industrielle (atout) ou formation et expérience équivalentes; Expérience en couture industrielle ou fabrication (atout); Minutie, dextérité manuelle et souci du détail

  Carpet trimming and levelling equipment, Carpet welding equipment

16 entreprises