Emplois “instrumentation devices” au Canada – Page 21

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 28j

  Electrician

  Long Sault, ON

  38,08–40,32 $/h

  P

  polyvantis

  5+ ansPolyvantis needs a licensed Ontario Industrial Electrician (442A) or Red Seal electrician with 5+ years of hands-on industrial work. Candidates need knowledge of mechanics, pneumatics, hydraulics, instrumentation and control, and must be able to shift work and get certified on scissor lifts and forklifts.

  SAP Plant Maintenance, Forklift, Scissor lift

  28j

  Electrician

  Long Sault, ON

  38,08–40,32 $/hTemps plein

  P

  polyvantis

  5+ ansCandidates need a valid Ontario 442A or Red Seal electrician certificate, 5+ years of hands-on industrial electrical experience and strong knowledge of mechanics, pneumatics, hydraulics and controls. Experience in plastic manufacturing, the ability to work shifts and certification on scissor lifts and forklifts are also required.

  SAP Plant Maintenance, scissor lift, forklift

• 28j

  Forklift Technician

  Toronto, ON +1

  40–45 $/h

  CM

  Combined Metal Industries

  2+ ansCandidates need a high school diploma or equivalent and at least two years of forklift, heavy equipment, automotive or similar mechanical experience. They must read repair manuals, use hand and diagnostic tools, and lift 50 pounds at a time.

  Hand tools, Power tools, Diagnostic equipment, Testing instruments

• 28j

  Casual Hospital Assistant/ Porter (Talent Pool)

  Toronto, ON

  27,85–28,67 $/hSur placeTemps partiel

  UH

  University Health Network: University Health Network (UHN) is Canada's largest research hospital, which includes Toronto General and Toronto Western Hospitals, Princess…

  Candidates need a high school diploma or equivalent and three to six months of related experience or on-the-job training. They must read, write and speak English fluently, lift and push patients over 20 kg, and know WHMIS and health and safety legislation.

  wheelchair, stretcher, bed, mobile device, IV pole

• 28j

  Registered nurse, surgical services - operating room - burnaby hospital

  Burnaby, BC

  41,42–59,52 $/h

  

  Fraser Health Authority

  1+ ansCandidates need graduation from an approved School of Nursing and current BCCNM registration as a Registered Nurse. One year of recent relevant clinical experience in the designated area, plus post-graduate training or certification, is required.

  surgical instruments, monitoring devices, computer applications

  29j

  Registered Nurse, Surgical Services - Operating Room - Burnaby Hospital

  Burnaby, BC

  41,42–59,52 $/h

  

  Fraser Health Authority

  1+ ansCandidates need graduation from an approved School of Nursing, current registration with the BCCNM, and one year of recent relevant clinical nursing experience, ideally in the OR. Strong assessment, communication and prioritizing skills are also required.

  Surgical instruments, Monitoring devices

• 28j

  Lead Engineering, Authentication Engineering (Senior Manager)

  Toronto, ON

  122k–172k $/anTélétravailTemps plein

  

  Allstate

  5+ ans3+ gestion5 to 10+ years of authentication or engineering experience; 3+ years of management experience; Expertise with Active Directory and Entra ID

  Active Directory, Entra ID, AD CS, Duo, Microsoft Authenticator, CyberArk

• 28j

  Electronics Technologist

  Mississauga, ON

  Sur placeTemps plein

  

  Ralliant

  2+ ansCandidates need a two-year college diploma, fluent English and experience reading electronic schematics. They should know standard test equipment such as oscilloscopes and multimeters, and be comfortable with Microsoft Office.

  Oscilloscope, Signal generator, Microsoft Word, Microsoft Excel, Microsoft Outlook

  28j

  Electronics Technologist

  Mississauga, ON

  Sur placeTemps plein

  

  Ralliant

  2+ ansCandidates need a two-year college diploma, fluency in English, and hands-on use of oscilloscopes, DMMs and signal generators. They must read electronic schematics and drawings, and have working knowledge of Microsoft Office.

  Oscilloscope, DMM, Signal generator, Microsoft Office

• 28j

  Staff Discipline Facilities Engineer (ICE)

  Calgary, AB

  Temps plein

  ?

  12+ ansDesign the integration of sensors, field controllers and monitoring technologies into DCS/PLC/SCADA and OT-IT data systems, defining I/O, controller, control network, HMI, historian and…; Our ideal candidate will have…

  ICE, Electrical engineering, Control systems, Process engineering, Technical support, SCADA

• 29j

  Maintenance Mechanic

  Ottawa, ON

  26–28 $/h

  CL

  Canadian Linen

  2+ ansCandidates need a college diploma, some college, or an apprenticeship in a mechanical, electrical or millwright trade, plus 2+ years in a similar industrial or manufacturing role. Hands-on skill with power tools and machine shop equipment is expected.

  Power tools, Saws, Drills, Milling machines, Welders, Precision measuring and testing instruments

  29j

  4th Class Maintenance Mechanic

  Regina, SK

  CL

  Canadian Linen

  2+ ansCandidates need a 4th Class Power Engineer certification and at least two years of industrial or manufacturing maintenance experience. Strong troubleshooting, machine repair and power tool skills are expected.

  power tools, saws, drills, welders, precision measuring instruments, testing instruments

• 29j

  Senior Electrical Engineer, Infrastructure

  Toronto, ON

  Sur placeTemps plein

  

  Canada Rocket Company: Canada Rocket Company (CRC) is a Toronto-based company developing medium lift (12,500kg) orbital launch capability with a team of alumni from…

  7+ ansCandidates need an electrical engineering degree, an active P.Eng with PEO, and 7+ years of industrial electrical design. They must know the Ontario Electrical Safety Code, CSA Z462 and hazardous-location classification, and use power system analysis software.

  Power system analysis software

• 29j

  Sr. Firmware Developer

  Victoria, BC

  85k–110k $/an

  

  AEM

  7+ ansCandidates need a bachelor's degree in computer science or electrical or computer engineering and 7+ years of embedded firmware experience. Strong C/C++ and RTOS skills, hardware bring-up experience, and clear communication are required.

  oscilloscope, logic analyzer, protocol analyzer, debugger

• 29j

  Production Supervisor

  Mississauga, ON

  Temps plein

  

  Excelitas Technologies: Excelitas is the leading provider of advanced, life-enriching technologies that make a difference, serving global market leaders in the life…

  3+ ans2+ gestionCandidates need 3+ years in manufacturing (electronics preferred), at least 2 years in a supervisory role, a college or university degree in operations management or a related field, and MRP system experience. Lean or Six Sigma certification is an asset.

  MRP system, Microsoft Office

• 29j

  Laser / Photonics Technician

  Canada

  Temps plein

  

  Sonele Inc.: specializes in medical device development and manufacturing within an ISO 13485 & FDA Registered Facility.

  Candidates need hands-on mechanical skill, CNC or machining experience, and steady hands for working under a microscope. A photonics or engineering technology diploma is preferred, though strong machining experience can be used in its place.

  Laser machining equipment, Sputtering/metallization equipment, Microscopes, Micro-dispensers, Precision measuring equipment

• 29j

  Diagnostic Physicist

  Toronto, ON

  Temps plein

  

  Daedal Systems

  Candidates need a master's degree or higher in physics, engineering or a related field, or equivalent practical experience. They must have taken a plasma diagnostic through its full lifecycle and be able to lead work independently.

  Procurement, Work independently

  29j

  Mechanical Design Engineer

  Toronto, ON

  90k–130k $/anTemps plein

  

  Daedal Systems

  3+ ansCandidates need 3 to 5 years of hands-on mechanical design and CAD experience, a physics background, and proven prototyping skills. A mechanical or engineering physics degree and familiarity with GD&T and thermal management are also required.

  SolidWorks, SolidWorks PDM, FEA software

• 29j

  Operational Technology Technician

  Lampman, SK

  SR

  Steel Reef Infrastructure Corporation

  3+ ansCandidates need 3 to 7 years of operational technology, automation or industrial controls experience, plus strong troubleshooting skills and a valid driver's licence. They must be eligible to work in the United States and able to travel extensively.

  Allen-Bradley PLCs, DeltaV DCS, Honeywell Experion, Ignition SCADA, VTSCADA, SCADAPack RTUs

• 29j

  Application Engineering, Intermediate

  Mississauga, ON

  

  Lakeside Controls: Lakeside operates across seven facilities in Canada – Mississauga, Winnipeg, Sudbury, Thunder Bay, Guelph and two locations in Sarnia.

  4+ ansCandidates need a mechanical or chemical engineering degree or an engineering technologist diploma, plus at least four years in application engineering, inside sales or a similar role. Strong communication, negotiation, analytical and customer-focused skills are required.

  CRM software

  29j

  Project Manager

  Mississauga, ON

  

  Lakeside Controls: Lakeside operates across seven facilities in Canada – Mississauga, Winnipeg, Sudbury, Thunder Bay, Guelph and two locations in Sarnia.

  10+ ansCandidates need a four-year degree in a related field and 10+ years of direct project leadership, ideally on automation, mechanical, piping or industrial construction projects. Strong knowledge of fabrication, procurement and project management principles, plus Microsoft Office, is required.

  Microsoft Office Suite

  29j

  Service Engineering

  Mississauga, ON

  

  Lakeside Controls: Lakeside operates across seven facilities in Canada – Mississauga, Winnipeg, Sudbury, Thunder Bay, Guelph and two locations in Sarnia.

  Candidates need an engineering or technologist degree in chemical, electrical or a related field, plus experience with process control systems such as Foxboro, ABB or Allen Bradley. Strong communication, report writing, training, project management and Microsoft Office skills are required.

  DCS, PLC, Microsoft Excel, Microsoft Office, Microsoft Windows

  29j

  Process Mechanical Engineer, Senior

  Mississauga, ON

  

  Lakeside Controls: Lakeside operates across seven facilities in Canada – Mississauga, Winnipeg, Sudbury, Thunder Bay, Guelph and two locations in Sarnia.

  10+ ansCandidates need a mechanical or chemical engineering degree, a P.Eng. designation, and 10+ years of process engineering experience. They must have direct experience applying Canadian hydrogen and industrial piping rules, plus strong process safety, project leadership and communication skills.

  HAZOP tools

  29j

  Process Mechanical Engineer, Senior (Process Controls)

  Mississauga, ON

  

  Lakeside Controls: Lakeside operates across seven facilities in Canada – Mississauga, Winnipeg, Sudbury, Thunder Bay, Guelph and two locations in Sarnia.

  10+ ansCandidates need an engineering degree, a P.Eng. designation and 10+ years of process control or industrial automation experience. Lakeside Process Controls also wants hands-on experience with P&IDs, control narratives, cause and effect matrices and process safety reviews.

  PLC, DCS, HMI, SIS, BMS

15 entreprises