Emplois “gauge” au Canada – Page 22

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 29j

  Quality Inspector (Afternoon Shift)

  Vaughan, ON

  N

  Noranco

  2+ ansCandidates need post-secondary education in a related field, at least 2 years of aerospace inspection experience, and the ability to read blueprints and geometric tolerances. ISO 9001 or AS9100 experience and Six Sigma or Lean training are also required, with CMM experience an asset.

  CMM, calipers, height gauges, plug gauges, micrometers, Microsoft Word

  29j

  CNC Machinist

  Pickering, ON

  N

  Noranco

  3+ ansCandidates need at least 3 years running CNC machines, plus a General Machinist certificate or equivalent with CNC upgrading. Fanuc or Mazak control knowledge is required, and the ability to read blueprints, use precision measuring tools and understand geometric tolerances is needed.

  CNC lathe, micrometer, dial gauge, deep micrometer, vernier, measuring block

• 29j

  Molding - Thermoforming Machine Operator(6 months Contract) - Shift B (7:30am - 7:30pm)

  Toronto, ON

  PI

  Polytainers, Inc.

  3+ ansPolytainers needs candidates with 3+ years of plastic sheet extrusion or thermoforming experience, strong troubleshooting and mechanical skills, and good English communication. A high school diploma or equivalent is required, and a plastics training diploma or trade school certification is preferred.

  Extruder, Thermoforming machine, Parts handling equipment, Weight scales, Calipers, SPC data system

• 29j

  CNC Machinist

  Alberta

  32–36 $/h

  QA

  Q2 Artificial Lift Services: Q2 ALS is a fully integrated company with a network of 50+repair and service locations situated across Canada and the USA.

  Candidates need proven experience programming and operating Mazak and DMG CNC machines, strong Mazatrol and G-code skills, and the ability to read engineering drawings. Experience with precision measuring tools and multi-axis CNC equipment is required, and a journeyman machinist certification is preferred.

  Mazak CNC, DMG CNC, Mazatrol, G-code, Calipers, Micrometers

  29j

  CNC Machinist

  Alberta

  32–36 $/h

  QA

  Q2 Artificial Lift Services: Q2 ALS is a fully integrated company with a network of 50+repair and service locations situated across Canada and the USA.

  Candidates need proven experience programming and operating Mazak and DMG CNC machines, strong Mazatrol and G-code skills, and the ability to read engineering drawings. Experience with precision measuring tools and multi-axis CNC equipment is required, and a journeyman machinist certification is preferred.

  Mazak CNC, DMG CNC, Mazatrol, G-code, Calipers, Micrometers

• 29j

  DRILLERS AND ASSISTANT DRILLERS

  Nisku, AB

  

  Ensign Energy Services Inc.

  Candidates need prior experience as a floorhand, motorhand or derrickhand, progressive rig experience, and well control training for supervisory roles. They also need associated safety tickets such as H2S, First Aid, Confined Space, Fall Protection and Rescue.

  drilling rig, drawworks, top drive, iron roughneck, mud pumps, crown saver

• 29j

  Electrical Assembly Technician

  Mississauga, ON

  26,44–31,73 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need a post-secondary diploma or degree in electrical engineering technology, instrumentation or mechanical engineering, plus at least 1 year of panel building or industrial wiring experience. They also need knowledge of 120V and 24V circuits, crimping, soldering and grounding, and must be able to lift up to 50 lbs.

  PLC, power tools, drills, jigsaws, soldering iron, crimping tools

• 29j

  CNC Machine Operator

  Hamilton, ON

  Sur placeTemps plein

  

  Orlick Industries: Orlick specializes in high quality, just in time delivery, and an unsurpassed level of customer service, recognized through numerous awards.

  Candidates need Grade 12 or equivalent, mathematical aptitude, good hand-eye coordination and the ability to multitask in a fast-paced setting. Working with minimal supervision is expected.

  CNC machine, gauges, fixtures

• 29j

  CNC Machinist - Horizontal Lathe - Day Shift

  Ontario

  NE

  New Era Group

  5+ ansCandidates need 5 to 8 years of CNC machining experience with large or complex parts. They must read blueprints and GD&T, know Fanuc, Heidenheim or Siemens controls, and work safely and independently, including Saturdays when needed.

  Horizontal CNC lathe, Overhead crane, Forklift, Micrometer, Bore gauge, Caliper

  29j

  CNC Machinist - Horizontal Lathe - Night Shift

  Ontario

  NE

  New Era Group

  5+ ansCandidates need 5 to 8 years of CNC machining experience with large or complex parts and proficiency with Fanuc, Heidenheim or Siemens controls. They must read blueprints and technical drawings, follow OHSA and shop safety practices, and be willing to work extended hours including Saturdays.

  Fanuc CNC control, Heidenheim CNC control, Siemens CNC control, Micrometers, Bore gauges, Calipers

  29j

  CNC Machinist - Vertical Lathe - Day Shift

  Ontario

  NE

  New Era Group

  5+ ansCandidates need 5-8 years of CNC machining experience with large or complex parts and the ability to read blueprints and GD&T. Proficiency with Fanuc, Heidenheim or Siemens controls is required, and general machinist certification is preferred.

  CNC vertical lathe, Micrometers, Bore gauges, Calipers, Overhead crane, Forklift

  29j

  CNC Machinist - Vertical Lathe - Night Shift

  Ontario

  Temps plein

  NE

  New Era Group

  5+ ansNew Era Group needs candidates with 5 to 8 years of CNC machining experience on large or complex parts and skill reading blueprints and GD&T. Fanuc, Heidenhain or Siemens control experience is required, and a general machinist certification is preferred.

  CNC vertical lathe, Fanuc, Siemens, micrometers, bore gauges, indicators

• 29j

  AZ Driver - Pay Per Mile

  Mississauga, ON

  

  Canada Cartage: Canada Cartage is a leading national provider of customer-located, dedicated trucking services and warehouse solutions.

  3+ ansCandidates need an AZ / Class 1 driver's licence, at least 3 years of long-haul driving experience and to be 23 or older. They must be able to lift more than 50 lbs at times and follow Ministry of Transportation and Highway Traffic Act rules.

  Tractor trailer, Satellite tracking equipment, Driver log

• 29j

  Licensed Plumber

  Edmonton, AB

  40–45 $/h

  E

  ENERCARE

  3+ ansCandidates need a high school diploma, a valid plumbing licence for the work area, and at least three years of licensed plumbing experience. Strong communication, mechanical aptitude and troubleshooting skills are also required.

  snakes, wrenches, pipe threaders, power saws, pressure gauges, hand and bench tools

• 29j

  Millwright Mechanic

  Guelph, ON

  30–40 $/h

  SI

  Stella-Jones Inc.

  3+ ansCandidates need 3+ years in a similar role, troubleshooting skills and experience with hydraulics, electrical, pumps, valves, piping and pneumatic systems. A millwright licence is an asset, and the ability to lift over 50 lbs is required.

  Hand tools, Power tools, Micrometers, Calipers, Gauges, Welding equipment

• 29j

  N2 Operator

  Grande Prairie, AB

  

  WSG Energy Services: WSG Energy Services is a global specialist service provider to traditional and new clean energy infrastructure.

  Candidates need H2S Alive, First Aid, TDG and WHMIS certifications, or be willing to get them. Previous nitrogen or oilfield experience is preferred, and a clean Class 1 or 3 driver's licence is an asset.

  Nitrogen pumping unit, Pressure gauges

• 29j

  Tasting Room Associate – Gray Monk Winery

  Lake Country, BC

  18,45–22 $/h

  

  Andrew Peller Limited

  Candidates need a passion for wine and customer service, strong verbal communication, and the ability to multitask in a fast-paced setting. Customer service, sales or hospitality experience is preferred, and wine certifications are a plus.

  POS

• 29j

  Machine Operator 1 - Production - Aft

  Vaughan, ON

  GA

  Give and Go Foods

  1+ ansGive & Go needs candidates with high school completion or equivalent, at least 1 year of machine operator experience in manufacturing, and the ability to read and write English. Candidates must be able to lift 25 to 50 lbs and work well both independently and in a team.

  packaging machine, SPC weight control system, totes and bins

  29j

  Production Technician - Night

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansCandidates need a college diploma in a technical program and at least one year of experience in a high-volume manufacturing environment. Comfort with a fast-paced, automated, noisy plant and lifting up to 25 lbs is expected.

  monitors, gauges, forklift

  29j

  Production Technician - Day

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansGive & Go needs a college diploma in a related technical program and at least one year of experience in a high-volume manufacturing environment.

  Manufacturing equipment and gauges, Forklift

  29j

  Production Technician

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansCandidates need a college diploma in a related technical program and at least one year of experience in a high-volume manufacturing environment. They must be able to lift up to 25 lbs and work in a fast-paced, loud, automated plant.

  monitors, gauges, heavy machinery, forklift

  29j

  Production Technician

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansCandidates need a college diploma in a related technical program and at least 1 year of experience in a high-volume manufacturing environment. Strong attention to quality, safety and process control is expected.

  Process monitors and gauges, Manufacturing equipment, Forklift

  29j

  Machine Operator

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansCandidates need high school completion or equivalent and at least 1 year of machine operator experience in a manufacturing environment. They must read and write English, work well both alone and in a team, and handle lifting of 25-50 lbs.

  Statistical Process Control (SPC) weight control system, Packaging machines, Totes and bins

  29j

  Machine Operator

  Brampton, ON

  GA

  Give and Go Foods

  1+ ansCandidates need a high school diploma or equivalent, one year of manufacturing machine operator experience, and the ability to read and write English. Strong problem-solving, teamwork and attention to tight timelines are also required.

  Packaging machines, Statistical Process Control (SPC) weight control system

13 entreprises