Emplois “National Fire Code” au Canada – Page 24

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Mechanical Designer

  Vaughan, ON

  HybrideTemps plein

  

  Trace Consulting Group: (TCG) is a multi-disciplinary Consulting Engineering firm with focus on building systems including Mechanical, Electrical, Fire protection, building…

  3+ ansCandidates need 3 to 5 years of mechanical building services experience, a diploma or degree in a mechanical or engineering program, and working knowledge of HVAC, plumbing and fire protection. Strong AutoCAD and MS Office skills and familiarity with the National and Ontario Building Codes are also required.

  AutoCAD, MS Office

• 1 mois

  Intermediate Forensics Mechanical Engineer

  Vancouver, BC

  HybrideTemps plein

  

  J.S. Held LLC: Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advise clients seeking to realize value…

  3+ ansCandidates need a mechanical engineering degree, a P.Eng. and 3 to 8 years of mechanical equipment or forensic failure-analysis experience. Strong writing, speaking, analytical skills and the ability to travel to sites are also required.

  Mechanical engineering, Inspection, Prepare technical reports, Building codes, Research, P.Eng.

• 1 mois

  Fire Alarm Technician Trainee

  Halifax, NS

  Sur placeTemps plein

  

  D&L Engineering Sales Limited

  Candidates need a valid driver's licence and a willingness to travel to remote sites. College or trade training in electronics or fire protection, fire service certifications, and knowledge of NFPA codes or electronic systems are preferred. Attention to detail and teamwork are essential.

  Power tools, Machinery

  1 mois

  Field Services Technician

  Antigonish, NS

  Sur placeTemps plein

  

  D&L Engineering Sales Limited

  2+ ansCandidates need at least 2 years of field experience in fire suppression, mechanical, HVAC or a related trade. They should be mechanically inclined, comfortable with basic electrical work, hold a valid driver's licence and know NFPA standards.

  Fire suppression equipment, Hand tools

  1 mois

  Fire Suppression Systems Installer

  Halifax, NS

  Sur placeTemps plein

  

  D&L Engineering Sales Limited

  2+ ansCandidates need at least 2 years of experience installing or servicing fire suppression, hydraulic, pneumatic, marine or related systems. They need strong mechanical aptitude, basic electrical troubleshooting, the ability to read technical drawings, and a valid driver's licence. Fire suppression certifications and technical training are preferred.

  hydraulic tools, pneumatic tools, test equipment

• 1 mois

  Heavy Equipment (Excavator) Driver

  Bowmanville, ON +3

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid DZ licence, NFPA 472 and NFPA 1001 training, and First Aid/CPR, or willingness to obtain them. Post-secondary education, fire, medical or police training, on-call availability and strong communication skills are also needed.

  vacuum truck

• 1 mois

  Senior Fire Protection Engineer

  Mississauga, ON

  Temps plein

  

  AtkinsRéalis

  5+ ansCandidates need an engineering degree, ideally in fire engineering, and at least 5 years of experience in fire hazard assessment, code compliance review or fire safe shutdown analysis. Ontario P.Eng. registration or eligibility, fire modelling skills and strong communication abilities are also required.

  CFAST, FDS

  1 mois

  Senior PSA (Probabilistic Safety Analysis) Analyst

  Mississauga, ON

  Temps plein

  

  AtkinsRéalis

  10+ ansCandidates need an engineering degree, at least 10 years of relevant experience, and excellent knowledge of CANDU design and PSA methodologies. Experience with CAFTA, CFAST or RiskSpectrum, licensing and client-facing leadership is an asset, along with nuclear energy worker eligibility.

  CAFTA, CFAST, RiskSpectrum

  1 mois

  Senior Mechanical Engineer - Defence Sector

  Bedford, NS +7

  135k–160k $/anTemps plein

  

  AtkinsRéalis

  10+ ansCandidates need a mechanical engineering degree, a Professional Engineer (P.Eng) licence or eligibility in Canadian provinces, and 10+ years of design experience with National Defence projects. Strong knowledge of mechanical building systems, building codes and consulting project management is also required.

  Mechanical engineering, HVAC, Plumbing, Building automation, Project management principles, Quality assurance

  1 mois

  Senior Electrical Engineer - Defence Sector

  Bedford, NS +7

  135k–160k $/anTemps plein

  

  AtkinsRéalis

  10+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. or eligibility to register in Canadian provinces, and 10+ years of electrical consulting experience with National Defence projects. Knowledge of the Canadian Electrical Code and the ability to obtain a SECRET clearance are required.

  Building systems monitoring technology, Communication skills, Control systems, Electrical engineering, Project management principles, Quality assurance

• 1 mois

  Senior Fire Protection Process Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need an engineering degree, at least 10 years of experience including 5 in fire protection design, and registration or eligibility as a Professional Engineer in Ontario. They need experience with NBCC, NFCC, CSA N293 and NFPA 14, plus strong leadership and technical communication skills.

  Design process, Lead a team, P.Eng., Reporting, Interpersonal skills, Communication skills

• 1 mois

  Commissioning Manager - Accelerator

  Toronto, ON

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  10+ ans5+ gestionCandidates need about 10 years of large infrastructure commissioning experience, including 5 in management, ideally in aviation. They need a recognized engineering degree, project management skills and knowledge of codes such as CSA, NFPA and ICAO.

  ALCMS, AGL, CCR, PBB, PMD, BHS

  1 mois

  Electrical Engineer (Buildings)

  Vancouver, BC

  90k–130k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  4+ ansCandidates need an electrical engineering degree, P.Eng. registration with EGBC, and 4-10 years of consulting design experience across sectors such as transportation, healthcare and industry. They must know the Canadian Electrical Code, use AutoCAD and Revit, write and speak excellent English, and hold a valid driver's licence.

  AutoCAD, Revit

  1 mois

  Intermediate Electrical Engineer

  Winnipeg, MB

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  4+ ansCandidates need an electrical engineering degree, P.Eng. registration with EGM, and 4-6 years of consulting or electrical design experience in industrial or commercial projects. They also need knowledge of the Canadian Electrical Code, AutoCAD skills, a valid driver's licence, and strong written and oral English.

  AutoCAD, PLC

  1 mois

  Intermediate Electrical Engineer

  Winnipeg, MB

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  4+ ansCandidates need an electrical engineering degree, P.Eng. registration with EGM, and 4-6 years of consulting or electrical design experience in industrial or commercial projects. They also need knowledge of the Canadian Electrical Code, AutoCAD skills, a valid driver's licence, and strong written and oral English.

  AutoCAD, PLC

  1 mois

  Electrical Engineer - Airfield Ground Lighting

  York, ON +1

  90k–120k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  6+ ansCandidates need an electrical engineering degree, a P.Eng. registration with PEO or eligibility for it, and about 6 years of industrial or commercial electrical design and construction experience on major projects. Thorough knowledge of airfield ground lighting, aviation regulations and engineering software is required.

  Maximo, ProjectWise, Oracle Enterprise Resource Planning, Bluebeam, Revit, AutoCAD

  1 mois

  Team Lead - Fire Protection

  Ottawa, ON

  120k–150k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  10+ ansCandidates need a bachelor's degree in engineering or a fire protection engineering technology diploma, at least 10 years of fire protection experience, and experience supervising and mentoring engineers. A professional engineering licence is an asset, along with client-facing and business skills.

  AutoCAD, Revit

  1 mois

  Senior Fire Protection Specialist

  Ottawa, ON +8

  90k–140k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  5+ ansCandidates need 5 to 10+ years of fire protection engineering experience, a bachelor's degree or fire protection diploma, and hands-on NFPA 13, 14, 15, 20 and 24 work. Clear communication, CADD, Revit or AutoSPRINK skills, a valid driver's licence and eligibility for federal security clearance are also required.

  AutoSPRINK, HydraCAD, Revit, CADD

  1 mois

  Intermediate Electrical Engineer – Hydropower

  Toronto, ON

  100k–138k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  7+ ansCandidates need an electrical engineering degree, a P.Eng. designation and 7 to 15 years of electrical design experience, ideally in power generation or utilities. Knowledge of CSA, IEEE and ANSI standards, strong communication skills and willingness to travel to sites are required.

  ETAP, AutoCAD, Revit, Microsoft Office

  1 mois

  Electrical Engineer – Hydropower

  St. John's, NL

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  7+ ansCandidates need a university degree in electrical engineering, a P.Eng. designation, and 7 to 15 years of electrical design experience in power generation, utility or industrial settings. Knowledge of CSA, IEEE and ANSI standards and proficiency with Microsoft Office are required.

  ETAP, AutoCAD, Revit, Microsoft Office

• 1 mois

  Hazmat Technician

  Corunna, ON +2

  Temps plein

  GU

  GFL Utility Services Inc.

  Candidates need hazardous-materials and emergency response training, including NFPA 472 and NFPA 1001, plus a valid AZ or DZ licence and first aid/CPR. Post-secondary education, pre-service fire, medical or police training, and confined space awareness are assets.

  Vacuum truck

• 1 mois

  Mechanical & Electrical (M&E) Coordinator

  Port Colborne, ON

  Temps plein

  JE

  J EllisDon Corporation

  3+ ansCandidates need 3 or more years of MEP coordination, commissioning or closeout experience, the ability to read technical drawings and BIM models, and strong organization and documentation skills. Familiarity with Navisworks, Bluebeam and document control platforms is required.

  Navisworks, Bluebeam, Microsoft Office, BIM models, PDF review tools

  1 mois

  Manager, Facilities Operations

  Brampton, ON

  Temps plein

  JE

  J EllisDon Corporation

  5+ ans3+ gestionCandidates need at least five years of building operations or facilities management experience, including three years managing operations. Trade certifications or post-secondary training, knowledge of smart building and controls systems, and strong problem-solving and relationship skills are needed.

  CMMS, HVAC systems, Building automation systems

• 1 mois

  Structural Engineer - Brampton, ON

  Brampton, ON

  HybrideTemps plein

  

  Victaulic Company

  5+ ansCandidates need a bachelor's degree in civil or structural engineering and 5+ years of structural engineering experience. A PE licence is preferred, along with knowledge of ASCE, IBC, AISC, ACI and NFPA codes and skill with RAM, RISA or STAAD.

  RAM, RISA, STAAD

10 entreprises