Emplois “Process gauges” au Canada – Page 27

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  CNC Machinist

  Winnipeg, MB

  Temps plein

  

  StandardAero

  2+ ansCandidates need 2+ years of CNC experience or a machinist apprenticeship, plus permanent full-time work authorization in Canada. Strong blueprint reading, precision measuring skills and the ability to lift 50 pounds are required.

  calipers, micrometers, gauges, hand tools, production management computer systems

• 1 mois

  Plant Terminal Operator Technician

  Sarnia, ON

  Sur placeTemps plein

  

  SGS

  Candidates need a high school diploma or equivalent and 0 to 1 years of relevant experience. Previous petroleum refinery experience is a strong asset, along with comfort working outdoors, rotating shift availability and the ability to follow work instructions accurately.

  Gauges, Loading arms, Hoses, Locomotive, Firefighting equipment

  1 mois

  Petroleum Inspector

  Montréal-Est, QC

  Sur placeTemps plein

  

  SGS

  3+ ansCandidates need a high school diploma and at least 3 years of relevant or equivalent experience. Post-secondary training in cargo inspection, petroleum experience, and strong attention to detail, communication and the ability to work irregular hours are assets.

  Sampling equipment, Calibration equipment

• 1 mois

  Senior Instrumentation and Monitoring Engineer

  Markham, ON

  Temps plein

  W

  WSP

  Candidates need a civil engineering degree, ideally in geotechnical engineering, plus hands-on experience installing monitoring instruments and supervising active construction sites. They also need a valid G driver's licence, the ability to lift 50 pounds, and availability for travel and extended hours.

  Total station, Inclinometers, Strain gauges, Monitoring readout units

  1 mois

  Intermediate Instrumentation and Monitoring Engineering

  Markham, ON

  Temps plein

  W

  WSP

  Candidates need a university degree in civil engineering, ideally with a geotechnical focus, plus hands-on experience installing monitoring instruments and working on active construction sites. A valid G driver's licence and a vehicle are required, along with the ability to lift 50 pounds and work near railway tracks.

  Total station, Inclinometers, Strain gauges, Vibrating wire piezometers, Tiltmeters, Crack gauges

• 1 mois

  INDUSTRIAL MECH-MILLWR

  Windsor, ON

  Sur placeTemps plein

  

  Ford BlueOvalCity\/TEVC

  Candidates need a completed millwright apprenticeship with a Certificate of Apprenticeship and Certificate of Qualification (433A), and Red Seal certification is an asset. Preferred experience includes CNC machines, precision machining, technical drawings, measuring instruments and working in high-speed manufacturing. They must work independently and rotating three-shift schedules.

  CNC machines, lathes, mills, grinders, measuring instruments

• 1 mois

  Mechanical Designer (Contract)

  Stratford, ON

  29,32–38 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansArrow needs candidates with 2 to 5 years of mechanical design experience, ideally in manufacturing. Strong CAD skills in SolidWorks or DraftSight, knowledge of welding and fabrication, and good teamwork and communication are required.

  SolidWorks, DraftSight, MRP system, Microsoft Excel, Microsoft Word, Microsoft Outlook

  1 mois

  Brake Press Set-up Operator

  Stratford, ON

  23,68–29,52 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  Arrow needs candidates with a high school education or equivalent experience, who can read blueprints and do some advanced math. Candidates should have experience working safely with lifting devices such as cranes and lift trucks, and be able to lift up to 30 lbs frequently.

  lift truck, hand tools

  1 mois

  CNC Machine Operator

  Guelph, ON

  22,50–29,27 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  5+ ansArrow needs candidates with at least 5 years of CNC operator or related experience and a high school diploma, with vocational CNC training as an asset. Candidates need to read blueprints, use precision measuring tools, understand GD&T, and work on a rotating shift.

  CNC drilling machines, CNC milling machines, CNC turning machines, CNC cutting machines, micrometers, verniers

  1 mois

  General Labour

  Guelph, ON

  21–24,91 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  Candidates need secondary school or equivalent and manufacturing experience is an asset. They must follow detailed instructions, pay close attention to detail, and work safely in a physically demanding, fast-paced environment.

  Grinders, Wire wheels, Jib crane, Magnets, Nylon slings, Chain slings

• 1 mois

  CNC Lathe Programmer/Set-Up Operator (Mazak Mazatrol)

  Brampton, ON

  Temps plein

  

  Davis Standard: The company has three manufacturing and technical facilities in the United States, as well as subsidiaries with facilities in China, Germany and the…

  5+ ansCandidates need at least 5 years of CNC lathe programming and set-up experience, extensive Mazak and Mazatrol experience, and the ability to read drawings and GD&T. A technical credential in CNC machining or equivalent experience is required.

  Mazak CNC lathe, Mazatrol, calipers, micrometers, bore gauges, indicators

• 1 mois

  Assistant CNC Operator - Afternoon Shift (Co-op)

  Etobicoke, ON +1

  21,50–29,40 $/hSur placeTemps plein

  SM

  S&C Minimal

  Candidates need to be enrolled in a post-secondary program in mechanical, electrical or manufacturing engineering, and eligible for the 4-month co-op term. They should be able to read blueprints, use measuring tools such as calipers and micrometers, lift up to 30 lbs, and work with attention to detail; manufacturing or CNC experience is an asset.

  CNC machine, Caliper, Micrometer, Go no-go gauges, Jib crane, Pump truck

  1 mois

  Assistant CNC Operator - Day Shift (Co-op)

  Etobicoke, ON +1

  21,50–29,40 $/hSur placeTemps plein

  SM

  S&C Minimal

  Candidates need to be in a registered co-op program and pursuing Mechanical or Manufacturing Engineering or a related field. They must read blueprints, use precision measuring tools, lift up to 30 lbs, and work with attention to detail and minimal supervision.

  CNC machine, micrometer, jib crane, manual pump truck, lift devices

• 1 mois

  Injection Molding Process Engineer

  London, ON

  Sur placeTemps plein

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  3+ ansStarlim North America needs a college diploma or technical apprenticeship and 3 to 5 years of fully automatic injection molding experience. Candidates should know quality systems such as ISO 9001, TS 16949, ISO 13485 and APQP, and have experience with 8D complaint resolution and reading technical drawings.

  injection molding machine, robotics, gauges and measuring equipment, crane, hoist

  1 mois

  Process Technician

  London, ON

  Sur placeTemps plein

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  2+ ansCandidates need a college diploma plus an apprenticeship or equivalent, and two to three years of experience running fully automatic injection molding. Experience with quality systems such as ISO 9001 or ISO 13485 and strong problem-solving and technical drawing skills are expected.

  Measuring equipment and gauges, Robotics

• 1 mois

  Flight Test Instrumentation Specialist

  London, ON

  120k–130k $/anSur placeTemps plein

  IC

  ITPS (Canada) LTD

  5+ ansCandidates need a degree or diploma in electrical engineering, avionics, aerospace engineering or a related field, plus 5 or more years of experience with aircraft systems, flight test and telemetry. Four years of on-the-job or apprenticeship training is required, along with knowledge of data acquisition systems and sensors and the ability to work in flightline and hangar environments.

  IADS, strain gauges, thermocouples, pressure transducers, ground station

• 1 mois

  Inspecteur qualité (Quart de soir) / Quality Inspector (Evening Shift)

  Dorval, QC

  Sur placeTemps plein

  S

  Smardt

  2+ ansMinimum de 2 ans d'expérience en inspection qualité en fabrication; Expérience en CVAC, équipements mécaniques ou fabrication industrielle; Connaissance de la norme ISO 9001

  calipers, micrometers, gauges, Microsoft Office

• 1 mois

  Steel Stud Framer - Fredericton

  Fredericton, NB

  Sur placeTemps plein

  

  FundyPros: FundyPros is New Brunswick's leading specialty contruction firm, setting the standard for quality, skill, safety and customer service.

  3+ ansCandidates need three to five years of steel stud framing and drywall installation experience, basic reading and math skills, and a strong focus on safety and quality. A Red Seal is preferred but not required.

  hand tools, power tools, ladders, scaffolds

  1 mois

  Framer - Charlottetown, PEI

  Charlottetown, PE

  Sur placeTemps plein

  

  FundyPros: FundyPros is New Brunswick's leading specialty contruction firm, setting the standard for quality, skill, safety and customer service.

  3+ ansCandidates need 3 to 5 years of steel stud framing and drywall installation experience, the ability to read plans, basic math skills, and a strong focus on safety and quality. Red Seal is preferred but not required.

  hand tools, power tools

  1 mois

  Framer – Saint John, NB

  Saint John, NB

  Sur placeTemps plein

  

  FundyPros: FundyPros is New Brunswick's leading specialty contruction firm, setting the standard for quality, skill, safety and customer service.

  3+ ansCandidates need 3 to 5 years of steel-stud framing and drywall installation experience, plus reading and basic math skills. Red Seal is preferred but not required, and attention to quality and safety is essential.

  hand tools, power tools

• 1 mois

  HVAC/Refrigeration Technician

  Port Carling, ON

  Sur placeTemps plein

  S

  SIFFT

  Candidates need a 313A or 313D refrigeration licence or third-year apprenticeship, a G3 gas licence and a valid G driver's licence with a clean record. Strong mechanical skills, attention to detail and the ability to lead and train others are essential.

  Hand tools, Power tools, Welding equipment, Brazing equipment, Leak testing devices

• 1 mois

  Systems Engineering Lead

  Toronto, ON

  150k–190k $/anSur placeTemps plein

  

  Egis Group: Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm.

  12+ ans5+ gestionCandidates need a P.Eng. designation, an engineering bachelor's degree, and at least 12 years of rail or transit systems engineering experience, including 5 years leading multidisciplinary teams. Strong requirements management skills with tools such as IBM DOORS are required.

  IBM DOORS

• 1 mois

  Embedded Developer

  Télétravail au Canada

  TélétravailTemps plein

  

  Interaxon: The company has sold more portable EEG devices than any other system in history.

  5+ ansCandidates need 5+ years of embedded C firmware and Python scripting, RTOS experience, and experience owning firmware releases. Secure bootloaders, BLE, reading schematics, and hardware debugging tools are also required.

  J-Link, ST-Link, logic analyzer, oscilloscope, RTT, STM32

• 1 mois

  Hotel and Event Management Coordinator

  London, ON

  HybrideTemps plein

  E

  EventConnect

  1+ ansCandidates need at least one year of experience in the hotel, sports or travel industry, plus strong customer service, multitasking and CRM skills. A tourism, hospitality or sports management education is preferred.

  CRM

15 entreprises