Emplois “Advanced Steel” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 8h

  Light General Labour

  Hamilton, ON

  18 $/hContrat

  

  Randstad Canada

  Candidates need a valid driver's licence, a reliable personal vehicle, and CSA-approved safety footwear. They must be able to stand, bend and lift up to 20 to 30 lbs, and follow verbal and written instructions with strong attention to detail. Warehouse or light industrial experience is an asset but not required.

  8h

  Forklift Operator – Automotive Manufacturing

  Guelph, ON

  21 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need a valid counterbalance forklift licence, 1 to 2 years of forklift experience in a plant, warehouse or industrial setting, and hands-on use of RF barcode scanners. They must be comfortable on their feet, wear CSA-approved steel-toed boots and commute reliably to Guelph.

  Counterbalance propane forklift, RF barcode scanners

  23h

  Food Production

  Milton, ON

  17,95 $/hTemps plein

  

  Randstad Canada

  Candidates need to be comfortable working in a cold warehouse for long periods and able to stand and do repetitive hand tasks. They need attention to detail, good hygiene, and CSA-approved steel-toe safety shoes. No prior food processing experience is required.

  cutting tools, packaging equipment, crates, pallets

  1j

  Shipper Receiver

  Gravenhurst, ON

  23 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need counterbalance forklift certification and 1 to 2 years of hands-on experience, plus shipping, receiving or material handling experience in a manufacturing setting. They must lift up to 50 lbs, stand for long periods, wear steel-toe boots, and have reliable transport to Gravenhurst for a 7:00 AM start.

  Forklift, Counterbalance forklift

• 8h

  Senior Structural Designer (Sudbury)

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  Candidates need a college diploma or technical credential in civil or structural engineering technology, drafting or a related field, or equivalent experience. Extensive structural design and drafting experience in mining or heavy industry, plus advanced 2D and 3D design software skills, are required.

• 9h

  AZ Flatbed Driver , Exeter

  Exeter, ON

  30 $/h

  

  TalentWorld: TalentWorld is a full-service recruitment and staffing agency that specializes in outsourcing, without losing the human element.

  3+ ansCandidates need a valid Ontario AZ driver's licence, a clean abstract and at least 3 years of AZ and flatbed driving experience. Load securement knowledge, customer service skills and willingness to do overnight runs are also needed.

  Flatbed day cab truck, Truck-mounted Moffett forklift, Electronic logbook, Company cell phone and tablet

• 18h

  Senior Structural Engineer

  Pickering, ON

  TT

  Tetra Tech

  12+ ansCandidates need a civil-structural engineering background, 12+ years of experience (an asset), P.Eng registration or eligibility, and strong STAAD Pro and concrete and steel design skills. A security clearance is required and power or nuclear plant experience is an asset.

  STAAD Pro, AutoCAD, MathCad, MS Office

  18h

  Civil Engineering Technician

  Whitehorse, YT

  TT

  Tetra Tech

  Candidates need a geology, civil engineering or construction services diploma, a valid Class 5 driver's licence and willingness to travel to field sites. Working knowledge of Microsoft Office, ArcGIS and AutoCAD, plus strong communication and problem-solving skills, is required.

  ArcGIS, AutoCAD, Microsoft Office, Nuclear density gauge

  18h

  Senior Lab Manager

  Yellowknife, NT

  TT

  Tetra Tech

  10+ ansCandidates need a diploma in civil engineering technology or materials testing, at least 10 years of materials testing experience, and prior experience managing a materials lab. A valid Class 5 licence, steel-toed boots and the ability to work outdoors in remote settings are also required.

  Nuclear density gauge, Hydrometers

  18h

  Intermediate Structural Engineer

  Pickering, ON

  TT

  Tetra Tech

  7+ ansCandidates need hands-on structural design experience with concrete and steel, and proficiency in STAAD Pro, AutoCAD and MathCad. A P.Eng or eligibility to register with PEO is preferred, and the candidate must be able to obtain a security clearance.

  STAAD Pro, AutoCAD, MathCad, MS Office

  18h

  Structural Designer

  Pickering, ON

  TT

  Tetra Tech

  2+ ansCandidates need proficiency in Revit and Autodesk Construction Cloud, a graduation from an accredited engineering or engineering technology program, and strong problem-solving and communication skills. Experience with structural codes, STAAD Pro and industrial design is considered an asset.

  Revit, Autodesk Construction Cloud, Procore, Cintoo, STAAD Pro, Civil3D

  18h

  Structural Engineer

  Calgary, AB +4

  TT

  Tetra Tech

  1+ ansCandidates need 1-6 years of structural engineering experience, including steel and foundation design for substations, transmission lines and industrial buildings, plus a bachelor's degree in civil or structural engineering. Strong design software skills and attention to detail are required.

  AutoCAD, MathCAD, STAAD, S-Frame, RISA, LPILE

  18h

  Senior Structural Engineer

  Mississauga, ON +4

  TT

  Tetra Tech

  10+ ansCandidates need 10+ years of structural engineering experience in steel and foundation design for power and industrial projects, a civil or structural bachelor's degree and a Canadian P.Eng. licence. Strong leadership, communication, and analysis skills and proficiency with structural analysis and transmission design software are also needed.

  AutoCAD, MathCAD, MS Office, STAAD, SFrame, RISA

  18h

  Intermediate Mechanical Engineer - Hydro

  Mississauga, ON +4

  TT

  Tetra Tech

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  18h

  Intermediate Mechanical Engineer - Hydro

  Vancouver, BC +4

  TT

  Tetra Tech

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  18h

  Structural Engineer (Subject Matter Expert)

  Mississauga, ON +4

  TT

  Tetra Tech

  20+ ansCandidates need a civil engineering degree with a structural specialization, a P.Eng. or PE licence, and at least 20 years of progressive structural experience, ideally in consulting. Strong expertise in power infrastructure design, codes such as CSA, AISC, ACI and ASCE, and structural analysis software is required.

  STAAD.Pro, RISA, SAP2000, PLS-TOWER, LPile, MFAD

  18h

  Junior Civil Technologist

  Calgary, AB

  TT

  Tetra Tech

  Candidates need 0 to 1 years of relevant experience and a civil engineering technology diploma is preferred. They need a valid Class 5 licence, strong written and verbal communication, and the ability to work with minimal supervision.

  Nuclear density gauge

  18h

  Waste Spot Checker

  Saskatoon, SK

  TT

  Tetra Tech

  Tetra Tech needs candidates with interest in waste management, strong verbal communication, attention to detail and punctuality for early starts. They must be legally entitled to work in Canada, own CSA steel-toed boots, and be able to walk long distances and lift up to 10 kg outdoors.

  tablet

  18h

  Waste Sorter

  Vancouver, BC

  TT

  Tetra Tech

  Candidates need their own transportation, CSA Green Triangle steel-toed boots, and the ability to lift up to 20 kg and work in varied outdoor weather. Attention to detail, punctuality for 8:00 am starts and the legal right to work in Canada are required; a Class 5 licence and waste audit experience are assets.

  Characteristics of waste, Collect samples, Health and safety, Data entry, Personal protective equipment, Attention to detail

• 18h

  Structural Engineer

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  5+ ansCandidates need a P.Eng. in good standing with APEGA and at least 5 years designing Canadian industrial and commercial structural steel buildings. Strong knowledge of the NBC and CSA standards, experience with structural analysis software, and solid communication and problem-solving skills are required.

  Graitec Advance Design, STAAD.Pro, S-Frame, MBS, AutoCAD, Microsoft Office

  18h

  Field Installer

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  PTW Energy Services needs candidates with construction or labour experience, ideally with steel or sheet metal products and mostly outdoor work. Forklift, rigging, crane, first aid and fall arrest tickets are an asset, and candidates must be able to work at height.

  forklift, overhead crane, aerial platform, construction tools

  18h

  Structural Site Supervisor

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need construction safety training (CSTS) and a working knowledge of building codes for pre-engineered steel structures, with steel cladding experience preferred. PTW Energy Services also expects strong leadership, communication and problem-solving skills, plus their own transportation and CSA-approved safety boots.

  Microsoft Office

  18h

  Structural Steel Estimator

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  5+ ansCandidates need at least 5 years of structural steel estimating experience in Canada, knowledge of CSA S16, CISC standards and CCDC contracts, and strong Excel skills. Experience with estimating software such as Tekla, Bluebeam or PlanSwift is preferred.

  Tekla EPM (FabTrol), FabSuite, Bluebeam Revu, PlanSwift, Tekla Structures, SDS/2

• 18h

  Shop / Welding Helper

  Calgary, AB

  Temps plein

  SW

  SPS West

  Candidates need to be reliable, safety-conscious and willing to learn from experienced tradespeople. Mechanical aptitude, the ability to read a tape measure and lift materials safely are expected; prior welding or shop experience is an asset but not required.

  Hand tools, Power tools, Tape measure, Forklift

6 entreprises