Emplois “brazing and welding equipment” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 24j

  308A Sheet Metal Journeyman - G2/G1

  Burlington, ON

  47,80–65,06 $/h

  N

  Neelands

  Candidates need a 308A sheet metal license (Term 4 and 5 apprentices considered), a G2 gas license and an Ozone Depletion Prevention certificate. Strong blueprint reading, brazing experience and the ability to work independently and under pressure are also required.

  Sheet metal tools, Gauges, HVAC testing equipment

  29j

  G2/G1 (308A) Mechanic - Journeyperson

  Burlington, ON

  45,77–62,40 $/h

  N

  Neelands

  Neelands needs a 308A sheet metal licence holder (Term 4 and 5 apprentices considered) with a G2 gas licence and a clean G licence. Candidates should have brazing experience, read blueprints and electrical schematics, and work well independently and under pressure.

  Gauges, HVAC testing equipment

• 26j

  Journeyman welder - day and night shift

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a Licensed Journeyman Welder certificate in Alberta and valid GMAW and SMAW welding certification in all positions. Working toward Red Seal or CWB tickets, routine maintenance experience and the ability to lift 50 lb are also required.

  MIG welder, TIG welder, ARC welder, brakes, shears

  26j

  Welder (2nd year, 3rd year, 4th year, journeyperson)

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a valid welding certification (GMAW and SMAW, certified in all positions), a Red Seal or AIT with 500+ hours in the blue book or working toward Interprovincial Red Seal or CWB tickets, and experience with routine maintenance. Strong attention to detail, good communication and the ability to lift up to 50 lb are also required.

  MIG welder, TIG welder, Arc welder, Brake press, Shear

• 26j

  Journeyperson Welder – Fort McMurray (Non-Camp/FIFO)

  Edmonton, AB

  65 $/hTemps plein

  

  Acden

  1+ ansCandidates need an Alberta Certified Journeyperson Welder or Red Seal ticket, 1 to 5 years of welding experience, and the ability to read blueprints. A valid Class 5 licence and a clean driver's abstract are required for the town shop, plus a Common Safety Orientation and passing pre-employment testing.

  welding equipment, flame-cutting equipment, metal shaping machines

• 26j

  25CUPE81 - HVAC Mechanic - Various Locations - REPOST

  Guelph, ON

  39,12–42,91 $/hTemps plein

  

  Upper Grand District School Board

  Candidates need a valid Ontario Certificate of Qualification as a Refrigeration and Air Conditioning Systems Mechanic (313A), a Gas Fitter 1 licence and an Ozone Depletion Prevention card. A valid Ontario driver's licence and a reliable vehicle are also required.

  Building Automation Systems, electronic and pneumatic testing equipment, welding equipment, computerized work order system

• 27j

  Maintenance Technician I - 3rd Shift

  Edmonton, AB

  

  Cintas: Cintas Corporation, a Fortune 500 company headquartered in Cincinnati, specializes in helping businesses of all sizes get Ready™ for the Workday®.

  2+ ansCandidates need 2+ years repairing industrial processing equipment, a 4th Class Power Engineering certificate, a high school diploma or GED, and the ability to read English maintenance literature and blueprints. Basic Microsoft Office skills and the ability to stand up to 7 hours of an 8-hour shift are also required.

  washers, dryers, steam tunnels, conveyor systems, boilers, Microsoft Office

• 27j

  Maintenance Mechanic (Automotive)

  Toronto, ON

  Temps plein

  QT

  QuickHires Talent Solutions Inc

  3+ ansCandidates need a Certificate of Qualification 433A (Industrial Mechanic Millwright) through an apprenticeship and at least 3 years of industrial maintenance experience. Hydraulic steam press experience is highly preferred, along with strong problem solving and shift communication.

  Shop machines, Blueprints and drawings, Welding equipment

• 27j

  Manufacturing Technician

  Toronto, ON

  Sur placeTemps plein

  IN

  Intero North America

  4+ ansCandidates need over 4 years of experience running manual mills and lathes from technical drawings, and over 2 years on 3 or 4 axis CNC mills. Strong problem-solving, communication and hand tool skills are essential.

  manual mill, manual lathe, 3 and 4 axis CNC mill, GibbsCAM, hand tools, sinker EDM

• 27j

  Building Services Technician

  Drumheller, AB +4

  CS

  Correctional Service Canada

  Candidates need a secondary school diploma and a completed building systems, HVAC or refrigeration technician certificate or apprenticeship. They also need hands-on experience maintaining commercial or institutional building systems, a valid driver's licence, English and reliability clearance.

  HVAC equipment, boilers, compressors, test equipment, Microsoft Word, Microsoft Excel

• 27j

  Journeyperson Pipefitter

  Quesnel, BC

  Temps plein

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a Red Seal Pipefitter certification, a Class 5 driver's licence and heavy industry experience. They must work safely, communicate well and work independently with little supervision.

  Cutting torch, Pipe cutter, Pipe cutting machine, Threading machine, Pipe bending tools, Hammer and chisel

• 27j

  Heating, Ventilation and Air Conditioning (HVAC) Mechanic

  Winnipeg, MB

  PR

  Power Recruitment

  3+ ansCandidates need a Red Seal refrigeration and air conditioning certificate, three to five years of experience, a valid driver's licence and a criminal record check. Strong communication, attention to detail and reliability are essential.

  brazing and welding equipment, leak testing devices

  27j

  Welder

  Winnipeg, MB

  PR

  Power Recruitment

  1+ ansCandidates need a Registered Apprenticeship certificate and ideally 1 to 2 years of related experience. They must be able to lift 45 kg, work at heights and in confined, hot, noisy outdoor sites, and bring their own vehicle and safety tools.

  arc welding machine, brazing machine, resistance welding machine, gas welding machine, soldering machine, flame-cutting equipment

  27j

  Welder

  Winnipeg, MB

  PR

  Power Recruitment

  1+ ansCandidates need a high school diploma and at least 7 months of welding experience. They must be physically fit to stand for long periods, handle up to 50 lbs, and work in a dusty, noisy, fast-paced environment.

  Arc-air cutting equipment, Brazing machines, Oxygen arc cutting equipment, Welding helmet, Torch

• 27j

  HVAC Technician

  Mississauga, ON

  Temps plein

  

  JP Recruitment

  Candidates need a valid HVAC technician qualification certificate, a DEP in refrigeration and air conditioning or equivalent, and experience in commercial or industrial HVAC. Strong knowledge of codes, plan reading, problem solving and teamwork are required.

  manifold gauges, vacuum pump, leak detector, hand tools

  27j

  HVAC Technician

  Ottawa, ON

  Temps plein

  

  JP Recruitment

  Candidates need a valid HVAC Technician Qualification Certificate or DEP in refrigeration and air conditioning, plus commercial or industrial HVAC experience. They must know current codes and standards, read technical schematics, and work autonomously and in a team.

  manifold gauges, vacuum pump, leak detector, specialized hand tools

• 28j

  Mechanic I - Millwright

  Waterloo, ON

  Temps plein

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  5+ ansCandidates need five years of recent practical millwrighting experience with HVAC, plumbing, piping and process equipment, plus a Certificate of Apprenticeship and Provincial Certificate of Qualification as an Industrial Millwright. Strong troubleshooting, drawing interpretation and machine tool skills are required.

  lathe, milling machine, welding equipment, testing devices, MS Office

• 28j

  LICENSED MILLWRIGHT 433A

  Caledon, ON

  Temps plein

  AK

  All Kingspan and Affiliate Companies

  3+ ansCandidates need a high school diploma or GED and at least 3 years of relevant millwright experience. They should be able to work with hand and power tools, welding, rigging and hydraulic or pneumatic systems, and be comfortable with basic Microsoft Office and maintenance systems.

  hand tools, power tools, precision measuring instruments, welding equipment, rigging equipment, Shires system

• 28j

  Robotic Welding Applications Technologist

  Mississauga, ON

  LE

  Lincoln Electric: For more information about Lincoln Electric and its products and services, visit the Company's website at http://www.lincolnelectric.com.

  5+ ansCandidates need a diploma or degree in welding, mechanical, manufacturing or engineering technology, plus 5+ years of welding or automation experience. Strong GMAW and FCAW knowledge, robotic welding exposure, customer-facing communication skills and willingness to travel are required.

  Cobots, Industrial welding robots, Mechanized welding equipment, GMAW equipment, FCAW equipment

• 28j

  Steamfitter-Pipefitter - Journeyman

  Fort Saskatchewan, AB

  Contrat, Temporaire

  ?

  With a tremendous depth of knowledge, extensive experience and demonstrated success in many markets across Canada and internationally, we build lasting partnerships with clients; Read and interpret drawings,…

  Journeyperson, Control systems, Heavy equipment operation, Mechanical systems, Problem solving, Red Seal

• 29j

  Welder Fitter

  Greater Sudbury, ON

  50,34 $/hTemps plein

  

  Vale

  4+ ansVale Base Metals needs a fully licensed journeyperson with a 437A Red Seal and CWB certification, and four or more years of industrial experience is preferred. Candidates need welding code knowledge, skills with oxy-fuel and plasma cutting, rigging and metal working equipment, and awareness of welding hazards.

  shear, brake press, rolls, radial drill, power saws

• 29j

  Mechanical Engineer

  Cambridge, ON

  Temps plein

  

  Mirion Technologies, Inc.: The Mirion Technologies group provides proven radiation safety technologies that operate with the highest levels of precision – from R&D labs, to…

  5+ ansCandidates need a Mechanical Engineering degree, a P.Eng licence and 5+ years of engineering experience in nuclear or similar fields. Custom fabrication experience, familiarity with ASME, IEEE and 10CFR standards, and strong CAD and communication skills are also needed.

  SolidWorks, AutoCAD, Microsoft Office

• 29j

  Plumber Apprentice Technician

  Regina, SK

  

  Reliance Home Comfort

  Reliance Home Comfort needs a registered plumber apprentice with a valid driver's licence and clean driving abstract, who is physically capable of the work and has strong communication and problem-solving skills.

  hand tools, power tools, soldering equipment, brazing equipment, welding equipment, pressure gauges

• 1 mois

  Assembleur Mécanique/Mechanical Assembler

  Dorval, QC

  20–25,50 $/hSur placeTemps plein

  S

  Smardt

  Niveau intermédiaire en français et en anglais; Capacité de soulever 23 kg et de travailler en hauteur; Station debout et marche prolongées en milieu industriel

  hand tools, power tools, assembly line equipment

19 entreprises