Emplois “spray finishing equipment” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 24j

  Prepper

  Peterborough, ON

  Temps plein

  CC

  CSN Collision

  Candidates need surface prep knowledge (sanding, masking, priming, cleaning) and collision repair experience is preferred. They must stand, bend and lift for long periods, and hold a valid driver's licence.

  sanders, fillers, masking tape, spray equipment

  1 mois

  Painter - Collision Repair

  Ontario

  Temps plein

  CC

  CSN Collision

  2+ ansCandidates need 2 to 3 years of autobody painting experience in collision repair, knowledge of paint systems and colour matching, and attention to detail. A valid driver's licence with a clean driving record is required, and an apprenticeship or certification is preferred.

  spray gun, paint booth, colour matching system, sanding equipment

• 26j

  Cabinetry Manager

  Edmonton, AB

  Sur placeTemps plein

  

  Ackard Contractors

  Ackard Contractors needs an experienced cabinetmaker or senior carpenter with progressive leadership experience and strong knowledge of cabinetry production, finishing and installation. Candidates should be organized and communicate well, and be comfortable with Buildertrend and other digital tools.

  Buildertrend, woodworking machinery, spray equipment, spray booth

• 27j

  QT - PAINTER

  British Columbia

  37,74 $/hTemps plein

  SD

  School District #83 (Kwsaltktnéws ne Secwepemcúl'ecw)

  3+ ansCandidates need journeyman certification in painting and decorating under the B.C. Apprenticeship Act or equivalent interprovincial qualification, plus three years of painting experience. They also need a valid B.C. driver's licence and the ability to work independently and as part of a team.

  scaffolding, ladders, staging

• 27j

  Taper

  Regina, SK

  Sur placeTemps plein

  KC

  Kalco Construction Ltd.

  Candidates need proven taping and drywall finishing experience, a own tools and vehicle, and certification in powered mobile equipment, fall arrest and WHMIS. Working at heights and reading plans are part of the job.

  Laser alignment system, Scaffolding, Powered mobile equipment

• 27j

  CORCAN Instructor positions: Paint & Pre-Finish, Sheet Metal/Welder and Mechanic Heavy Equipment

  Drumheller, AB +13

  CS

  Correctional Service Canada

  Candidates need a valid trade certification related to the position, or an acceptable mix of education, training and experience where the province does not require one. They also need knowledge of CORCAN programs and metal or welding techniques, strong oral and written communication, and project planning skills, with a valid driver's licence and bilingual or English and French ability.

  precision measuring instruments, powder coating equipment, electrostatic finishing systems, sandblasting equipment

• 27j

  Coater

  Lloydminster, AB

  Temps plein

  F

  Foremost

  Foremost needs candidates with tank, vessel or pipe coating familiarity and industrial painting experience or a Painter Trade Certification. Candidates must read and follow written and verbal instructions, calculate in metric and imperial, and hold WHMIS, fall protection and confined space training.

  spray equipment, brush, hand tools

• 27j

  Meat Cutter - Northern Canada

  Canada

  

  The North West Company

  Candidates need meat cutting and food handling experience, a willingness to relocate to remote northern markets, and the ability to lift over 50 pounds and work long, extended hours in harsh conditions.

  cutting equipment, cooler, freezer

• 28j

  Production Operator

  Paris, ON

  22,08 $/hContrat

  

  Randstad Canada

  Candidates need strong physical stamina and comfort with repetitive heavy lifting. Production, material handling or machine experience is an asset, along with functional English, CSA-approved steel-toe boots from day one, and reliable transportation to Paris.

  Automated processing and spraying equipment, Manual clamping fixtures, Conveyor line

• 28j

  Shift engineer/maintenance worker

  Coquitlam, BC

  37,72 $/h

  

  Fraser Health Authority

  4+ ansCandidates need a B.C. 4th Class Power Engineer certificate of competency and four years of recent related experience, or an equivalent mix of education and experience. They must read blueprints and specifications, communicate well, and operate related equipment.

  Building automation system, Volt meter, Amp meter, Leakage tester, Welding equipment

  29j

  Shift Engineer/Maintenance Worker

  Coquitlam, BC

  37,72 $/h

  

  Fraser Health Authority

  4+ ansCandidates need a BC 4th Class Power Engineer certificate and four years of recent related experience, or an equivalent mix of education, training and experience. They must read blueprints and specifications, operate equipment, and communicate well verbally and in writing.

  Leakage tester, Building automation system

• 28j

  Automotive Spray Painter

  Toronto, ON

  Sur placeTemps plein

  

  PCI

  1+ ansCandidates need a high school diploma or GED and 1 to 3 years of spray painting, paint mixing and clearcoat experience. Composite painting experience is an asset, along with attention to detail and comfort working in a team.

  spray gun, spray booth, ventilation systems, paint mixing equipment

• 28j

  Insulators

  Alberta

  Temporaire

  

  ACTIMS

  Candidates need journeyman-level insulation experience and the ability to read drawings and specifications. Work involves heat, cold, heights and dusty or hazardous materials, so safety practices and respirator use are essential.

  scaffolding, ladders, respirator, pinwelding equipment

• 29j

  Blast, Body & Paint Tech

  Thamesville, ON

  20–33 $/hSur placeTemps plein

  

  Penta Equipment Inc.: Penta Equipment is an agricultural manufacturing company with four production facilities throughout southwestern Ontario, Canada.

  Candidates need hands-on experience in painting, finishing, blasting or body work, ideally in automotive, industrial or agricultural settings. They should know spray equipment, be detail-oriented, safety-minded, and able to work as part of a team with limited supervision.

  paint pumps, catalyst systems, blasting equipment

• 1 mois

  Construction - Drywall Labour

  Vancouver, BC

  NP

  Northland Properties - Construction & Design

  2+ ansCandidates need 2+ years of experience as a drywall installer or taper, plus a plaster trade certification, Red Seal or equivalent. They must be able to stand 10-12 hours a day, lift 50 lbs, climb scaffolding, and work in outdoor weather.

  trowel, wide knife, taping machine, scaffolding

  1 mois

  Construction - Drywall Installer

  Kelowna, BC

  NP

  Northland Properties - Construction & Design

  2+ ansCandidates need at least 2 years of experience as a drywall installer or taper, plus the physical ability to lift 50 lbs and climb scaffolding. They must follow health and safety rules, keep tools and the work area in order, and work well with a crew.

  taping machine, trowel, broad knife, drywall sheets, metal corner beads, scaffolding

  1 mois

  Construction - Drywall Installer

  Surrey, BC

  NP

  Northland Properties - Construction & Design

  2+ ansCandidates need at least 2 years of working experience as a Drywall Installer/Taper, the ability to lift 50 lbs and climb scaffolding, and a legal right to work in Canada. Strong safety awareness and the ability to follow instructions are expected.

  taping machine, trowel, wide knife, metal grids

• 1 mois

  Door Shop Painter

  Halton Hills, ON

  22,75 $/hTemps plein

  

  Metrie: Metrie is the leading manufacturer and distributor of interior finishings in North America.

  2+ ansCandidates need a high school diploma or GED and 2-3 years of pre-finishing and painting wood or metal with an air spray gun. Colour mixing, physical work such as lifting up to 50 lbs, and comfort in warehouse conditions are required.

  Air spray gun, Paint pumps, Handheld scanner, Forklift

• 1 mois

  Janitor

  Vancouver, BC

  27,85 $/hTemps plein

  

  First United

  Candidates need Grade 12, WHMIS knowledge, and the ability to lift up to 25 kilograms and read chemical labels. They should work calmly and professionally with vulnerable people, and non-profit or shelter experience and janitorial training are assets.

  Chemical cleaners, Power equipment, Snow shovels, Squeegees, Vehicles, Ladders

• 1 mois

  Automotive Finish Painter- Afternoon's/Evening's

  Winnipeg, MB

  36,85 $/hTemps plein

  

  New Flyer: With 8,200 team members in nine countries, NFI is a leading global bus manufacturer of mass mobility solutions under the brands New Flyer®…

  New Flyer needs candidates with experience in high-volume automotive, heavy-duty transport or aviation painting, which is strongly preferred. Candidates should read blueprints, know surface preparation for metal and fiberglass, and work carefully under production deadlines.

  Spray guns, Axalta paint systems, Paint spraying equipment

• 1 mois

  Line Operator

  St. Albert, AB

  26 $/hTemps plein

  

  Orbia: Orbia is a company driven by a shared purpose: to advance life around the world.

  Dura-Line needs candidates who can do basic math and measurements, understand extruders, cooling and vacuum systems, and quality standards, and handle physical work including lifting 50 pounds. A valid lift forklift licence and CSA-approved steel-toe shoes are required.

  extruder, printer, reeler, puller, vacuum system, chiller system

• 1 mois

  Automotive refinisher

  Saskatoon, SK

  30–36 $/hTemps plein

  

  Riide Holdings Inc

  Candidates need previous automotive refinishing experience, strong colour-matching and quality-control skills, and the ability to work efficiently in a production setting. A valid driver's licence and journeyperson or I-CAR training are assets.

  spray guns, paint booth, colour-matching systems

• 1 mois

  Painter (Spray Gun)

  Winnipeg, MB

  22 $/hTemporaire

  

  Staffmax

  Candidates need prior hands-on spray gun experience and attention to detail for consistent finish quality. Industrial, automotive, cabinet, window or door painting experience is an asset.

  spray gun

• 1 mois

  General Labour - Fabricator

  Saskatoon, SK

  Temps plein

  

  Calian Group Ltd.: The company went public in 1993 and became Calian Group Ltd.

  Candidates need mechanical aptitude or hands-on experience from trades, assembly or fabrication, plus a strong work ethic, attention to detail and a commitment to safety. No prior experience is required, but applicants must be able to obtain a Controlled Goods clearance.

  Spray booth, Laser metrology equipment

20 entreprises