Emplois “welding gear” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 16j

  Line Boring Welder/Machinist (Various Schedules Available)

  Greater Sudbury, ON

  Temps plein

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  3+ ansCandidates need post-secondary education in welding or machining and three years of experience with GMAW, SMAW and FCAW welding. Line-boring experience is a major asset, and CWB or Red Seal certification is an asset.

  Electric welding equipment, Semi-automatic welder, Automatic burning equipment

  16j

  Shop Technician, Heavy Equipment

  Kanata, ON

  Temps plein

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  3+ ansToromont Cat needs a licensed heavy equipment technician with 3 to 5 years of trade experience, a clean driver's abstract and a safety-first attitude. Candidates also need reading of prints and technical bulletins, and good computer and communication skills.

  Caterpillar testing equipment, Cat Systems

• 16j

  Maintenance Mechanic

  Prince Edward Island

  Temps plein

  PA

  PEI Agromart Ltd.

  Candidates need a high school diploma or equivalent, basic mechanical skills, comfort with hand tools, and the ability to lift 50 lbs in dusty conditions. A reliable vehicle to get to work is required, and a Class 1 or 3 licence is an asset.

  hand tools, power tools, welding equipment, diagnostic instruments, forklift

• 20j

  Shipper/Receiver, Warehouse

  Calgary, AB

  Temps plein

  KE

  Kristian Electric Ltd

  Candidates need a valid driver's licence with a clean three-year driving abstract, and a valid forklift operator certificate. Strong organization, attention to detail, teamwork, safety awareness, and clear written and verbal communication are needed, plus knowledge of welding equipment or fabrication being an advantage.

  forklift, hand tools, powered hand tools, chain hoists

• 20j

  B-Pressure Welder

  Nisku, AB

  45 $/hContrat

  

  Randstad Canada

  3+ ansCandidates need an active Alberta Journeyman Welder certificate and a current Alberta B-Pressure (F-Number) ticket. They also need 3+ years of code pipe welding experience and the ability to pass a standard 6G shop weld test.

  welding helmet, hand tools, rigging tools

  20j

  2nd-Year Welder Apprentice

  Thorsby, AB

  26–28 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need an active Alberta 2nd-year welder apprenticeship with about 2,000 bluebook hours and hands-on manufacturing experience. They must be skilled in wire welding on structural plate and live within a 40-minute drive of Thorsby with their own vehicle.

  MIG welder, Shop prints

  20j

  CWB Welder

  Sherwood Park, AB

  40–43 $/hContrat

  

  Randstad Canada

  Candidates need current CWB tickets for FCAW and MCAW, proven hands-on experience in heavy structural steel fabrication, and the ability to read drawings in metric and imperial units. They must be comfortable with heavy lifting and have a reliable personal vehicle.

  overhead crane, carts

  21j

  B-Pressure Welder - TIG

  Calgary, AB

  Temps plein

  

  Randstad Canada

  5+ ansRandstad Canada needs a welder holding a valid Alberta Journeyman Welder Trade Certificate and an active B-Pressure Qualification. Strong TIG skills are required, ambidextrous TIG is a priority, and candidates must pass a hands-on weld test.

  overhead crane, forklift, boom lift, rigging gear, TIG welder, MIG welder

  21j

  Journeyman Production Welder

  Calgary, AB

  40–42 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of shop-based MIG and TIG welding experience within the last 3 years. An active CWB certification or equivalent trade credential is required, along with blueprint reading skills.

  MIG welder, TIG welder, hand tools, jigs, fixtures

  26j

  Production Technician

  Edmonton, AB

  22 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need a high school diploma or equivalent and 2+ years of manufacturing or warehouse experience. They must use power tools, lift 50+ lbs regularly, work on their feet and wear a respirator when required.

  forklift, power tools, drills, saws, specialized production equipment, welding equipment

  27j

  B-Pressure Welder

  Nisku, AB

  45 $/hContrat

  

  Randstad Canada

  3+ ansCandidates need an active Alberta Journeyman Welder certificate and a B-Pressure ticket, plus at least 3 years of code pipe welding experience. They must be skilled in SMAW, GMAW and MCAW, able to pass a 6G shop weld test, and have their own transport to Nisku.

  Rigging tools, Welding helmet, Hand tools

  27j

  2nd-Year Welder Apprentice

  Thorsby, AB

  26–28 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need an active Alberta 2nd-year welder apprenticeship with about 2,000 bluebook hours and hands-on manufacturing experience. They also need FCAW, MCAW or MIG wire welding skills on structural steel plate, and must live within a 40-minute drive of Thorsby with their own vehicle.

  MIG welder, Shop prints

• 21j

  Spécialiste en réparation des remorques et des articles de support à la location

  Gatineau, QC

  Temps plein

  UC

  U-Haul Co. (Canada) Ltd.

  Expertise en outils à main, pneumatiques et électriques; Posséder ses propres outils à main; Permis de conduire valide et dossier de conduite propre

  hand tools, air tools, power tools, forklift

• 21j

  Auto Body Technician

  Walnut Grove, BC

  Temps plein

  

  MasterTech

  Candidates need experience as a qualified auto body technician who can do quality collision repairs. A Red Seal ticket is preferred.

  soldering equipment, cutting torch, welding gear

  23j

  Auto Body Technician

  North Vancouver, BC

  Temps plein

  

  MasterTech

  Candidates need auto body repair experience and a Red Seal ticket is preferred. They must be reliable and able to work well in a productive team.

  soldering equipment, cutting torch, welding gear

  23j

  Auto Body Technician

  New Westminster, BC

  Temps plein

  

  MasterTech

  Candidates need experience as an auto body technician, with a Red Seal ticket preferred. They must be reliable and productive and work well in a team.

  soldering equipment, cutting torch, welding gear

  23j

  Auto Body Technician

  Richmond, BC

  100k–150k $/anTemps plein

  

  MasterTech

  Candidates need experience as a qualified auto body technician. A Red Seal ticket is preferred, and the work requires reliability and productivity on a busy team.

  soldering equipment, cutting torch, welding gear

• 26j

  Equipment & Small Engine Mechanic

  Surrey, BC

  27–40 $/hSur placeTemps plein

  BA

  Bothwell Accurate Co

  2+ ansCandidates need 2 to 5+ years of engine and equipment maintenance experience, ideally in construction, industrial or manufacturing. A trade certification is required, and a valid Class 5 licence with a clean record is needed; Red Seal or Licensed Mechanic designation and forklift certification are assets.

  forklift, crane, SiteDocs, WorkMax, Microsoft 365

• 27j

  Millwright

  North Vancouver, BC

  37–46 $/hTemps plein

  

  Boundary Mining Group

  3+ ansCandidates need a red seal certificate as a Millwright, Machinist or Heavy Duty Mechanic (or be a second-year apprentice), at least 3 years of machine shop experience, and skills in gearbox repair, industrial controls and reading engineering drawings.

  engineering drawings, schematics

• 27j

  Maintenance Technician, Afternoon

  Mississauga, ON +2

  32–38 $/hTemps plein

  EI

  Ecolab Inc.

  3+ ansEcolab needs candidates with a high school diploma or GED, a Millwright license (433A) or active progress toward it, and 3+ years of industrial maintenance experience with electrical and mechanical systems. Strong communication skills and the ability to follow oral or written instructions are also required.

  CMMS, PLC, forklift

• 27j

  Maintenance Mechanic

  British Columbia

  47,88 $/hTemps plein

  

  Metro Vancouver: Metro Vancouver also regulates air quality, plans for urban growth, manages a regional parks system and provides affordable housing.

  4+ ansCandidates need a Grade 12 education, a Heavy Duty Mechanic or Millwright trades qualification, and at least four years of mechanical repair experience. Strong skills in machine fitting, welding, pipefitting, diesel and large pump repair, and computerized maintenance systems are required, along with a valid B.C. driver's licence.

  CMMS, lathe, milling machine, micrometer, torque wrench, gas cutting torch

• 27j

  General Labour

  Camrose, AB

  Contrat

  PP

  PERMA PIPE INC

  Candidates need to be authorized to work in Canada, reliably commute to Camrose, and pass a pre-employment drug test. They must be able to stand and walk for most of a 10-hour shift, lift up to 50 lbs, and work in industrial conditions with PPE; experience is an asset but not required.

  forklift, pipe coating equipment, foam equipment

• 27j

  Maintenance Technician, Afternoon

  Mississauga, ON +2

  32–38 $/hTemps plein

  CE

  (CAN) Ecolab Co.

  3+ ansCandidates need a high school diploma or GED, a Millwright license (433A) or be working toward it, and 3+ years of industrial maintenance experience with electrical and mechanical systems. Strong communication skills and the ability to lift 50 lbs are also required.

  CMMS, PLC, forklift, welding equipment, hydraulic tools, rigging equipment

• 27j

  Millwright - Continental Shift

  Milton, ON

  25–45 $/hTemps plein

  

  Bullet Trade Services

  18+ ansCandidates need a Millwright licence (433A), 3rd or 4th year senior apprenticeship, or experience as an Industrial Mechanic. They must be able to work 12-hour shifts and hold a valid driver's licence with a clean record.

  Millwright, Valid driver's licence

13 entreprises