Emplois “gauges” au Canada – Page 30

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Technical Expert, Engineering - Aircraft Loads

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  10+ ansCandidates need a Bachelor's or Master's degree in Aerospace or Mechanical Engineering and at least 10 years of external loads analysis experience in aerospace. Strong skills in aeroelastic loads, FAR 25 certification, finite element modelling, Nastran and programming are required.

  Nastran, DMAP, MATLAB, Python, Fortran, C/C++

  1 mois

  Engineering Professional Senior, Mechanical Engineering, Experimental Design - Wind Tunnel Models

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  12+ ansCandidates need a bachelor's degree in mechanical or aerospace engineering, OIQ membership and at least 12 years of wind tunnel model design experience. Strong CATIA V5 or Siemens NX skills and knowledge of aerodynamics, instrumentation and aerospace regulations are required, along with French and English communication skills.

  CATIA V5, Siemens NX, wind tunnel, data acquisition systems, strain gauges, pressure sensors

  1 mois

  Technical Expert, Engineering - Aircraft Loads

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  10+ ansCandidates need 10 years of external loads experience in aerospace, a Bachelor's or Master's in Aerospace or Mechanical Engineering, and knowledge of FAR 25 certification. Strong skills in finite element modelling, aeroelastic analysis, Nastran and programming in MATLAB or Python are expected.

  Nastran, DMAP, MATLAB, Python, Fortran, C/C++

  1 mois

  Buyer, Tooling

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ ansCandidates need 5 to 8 years of procurement experience in manufacturing, strong negotiation and problem-solving skills, and French and English fluency. Experience with tooling, SAP, Maximo or Ariba and reading mechanical drawings are strong assets.

  SAP, Maximo, Ariba

• 1 mois

  Quality Inspector (Segment 1; Aerospace)

  Stratford, ON

  34,50 $/h

  S

  Schaeffler: With innovative technologies, products, and services for electric mobility, CO₂-efficient drives, chassis solutions and renewable energies, the…

  Candidates need a Grade 12 diploma, demonstrated inspector-level competency or mechanical aptitude, and knowledge of quality systems and policies. They must pass a Canadian Controlled Goods Assessment, a criminal background check, and comply with ITAR.

  Mechanical gauges, Pneumatic gauges, Optical gauges, Electrical gauges

• 1 mois

  Water Resource Engineer

  Vancouver, BC +4

  Temps plein

  SC

  SLR Consulting (Canada) Ltd

  3+ ansCandidates need a Bachelor's degree in water resources engineering, hydrology or a related field, with an M.Sc. in hydrology preferred. They need 3+ years of experience with rainfall-runoff modelling, GIS, and R or Python, and must be registered or eligible as a G.I.T. or E.I.T. with a valid BC driver's licence.

  GoldSim, GIS software, R, Python, HEC-RAS, Iber

• 1 mois

  Design & Validation Engineer

  Guelph, ON

  Sur placeTemps plein

  LN

  Linamar - New

  3+ ansCandidates need a mechanical, hydraulic, electrical or mechatronics engineering degree and at least 3 years of design or validation experience, preferably on mobile or heavy equipment. Strong technical writing, calculation skills and the ability to work on complex projects with little supervision are required.

  LabVIEW, Somat, MathCAD, FEA, CFD, Automation Studio

• 1 mois

  Intermediate / Senior Structural Engineer

  Calgary, AB +2

  Temps plein

  

  EnGlobe Corp.: Specialty engineering and environmental services firm with over 60 locations across Canada.

  5+ ansCandidates need a P.Eng. registration, a civil engineering degree with a structural focus, and 5+ years of structural design experience, including wood construction. They also need knowledge of Canadian codes (CSA, ACI, NBCC), structural software experience, and strong communication skills.

  ETABS, SAFE, SFRAME

  1 mois

  Structural Engineer

  Calgary, AB +2

  Temps plein

  

  EnGlobe Corp.: Specialty engineering and environmental services firm with over 60 locations across Canada.

  5+ ansCandidates need APEGA registration, a civil engineering degree with a structural focus, and 5+ years of structural design experience, ideally in wood construction. They also need knowledge of Canadian building codes, structural analysis software, strong written and verbal communication, and a valid driver's licence.

  ETABS, SAFE, SFRAME

• 1 mois

  Maintenance Technician (Fifth Class Power Engineer)

  Vancouver, BC

  Temps plein

  

  Alsco: Alsco Uniforms provides managed uniform and linen laundry services for healthcare, industrial & hospitality businesses.

  2+ ansCandidates need at least two years of maintenance engineering experience with machinery, electricity, hydraulics, pneumatics, welding and boilers. A valid driver's licence with a clean driving record is required, and a Fifth Class Power Engineer certificate, boiler licence or PLC programming may be needed at some locations.

  PLC, forklift, power tools, hand tools, boiler, welding equipment

• 1 mois

  Quality Production Associate - Machining (Afternoons)

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  Candidates need a technical diploma or degree, with mechanical engineering preferred, and ability to read engineering drawings. Knowledge of SPC, Lean, PFMEA and 8D or DMAIC problem-solving is needed, and CNC or CQE experience is an asset.

  QDAS, Precision measurement equipment, Gauges, Calibration equipment

  1 mois

  Quality Production Associate - Machining (Afternoons)

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  Candidates need a technical diploma or degree, with mechanical engineering preferred, and ability to read engineering drawings. Knowledge of SPC, Lean, PFMEA and 8D or DMAIC problem-solving is needed, and CNC or CQE experience is an asset.

  QDAS, Precision measurement equipment, Gauges, Calibration equipment

• 1 mois

  Solution Architect & Pre-Sales, NetSuite

  Télétravail au Canada

  Télétravail

  

  Myers-Holum

  4+ ansCandidates need 4 to 5+ years of hands-on NetSuite implementation, upgrade and support experience, plus full life-cycle implementation and project planning skills. Strong presentation skills and a deep understanding of the pre-sales process are also required.

  NetSuite

• 1 mois

  Seasonal Oil Heating Technician

  Stellarton, NS

  Temporaire

  

  Parkland Corporation

  Candidates need a Class 5A licence with a clean driver's abstract, a Red Seal Oil Heat Systems Technician credential, and knowledge of CSA B139 oil codes. Strong mechanical aptitude and interpersonal skills are required.

  Troubleshoot, Administrative support, Red Seal, Interpersonal skills, Leadership

• 1 mois

  Electronics Inspector

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  2+ ansCandidates need a college diploma in electronics, mechanics, aeronautics or equivalent, plus two to five years of relevant experience. They must read plans, understand tolerances and quality assurance processes, know IPC-A-610 and IPC-A-620, and hold reliability security clearance.

  ERP system, CMM, micrometer, vernier, gauge, production databases

  1 mois

  Electronics Inspector

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  2+ ansCandidates need a college diploma in electronics, mechanics, aeronautics or equivalent, plus two to five years of relevant experience. They must read plans, understand tolerances and quality assurance processes, know IPC-A-610 and IPC-A-620, and hold reliability security clearance.

  ERP system, CMM, micrometer, vernier, gauge, production databases

• 1 mois

  Apprentice Mechanic

  Barrie, ON

  Temps plein

  M

  MTNMTHUS

  3+ ansCandidates need a high school diploma or equivalent and a valid Ontario G driver's licence, preferably class B or C with Z airbrake endorsement. Three years of driving with a clean record is required, and an automotive or truck and coach mechanic's certificate is preferred.

  Computer diagnostic equipment, Pressure gauges, Hoists, Hydraulic jacks, Hand and power tools, Tow motors

  1 mois

  CAN: Mechanic

  Barrie, ON

  Temps plein

  M

  MTNMTHUS

  3+ ansCandidates need a Truck and Coach Technician Certificate (310T), a valid Ontario G licence (B or C with Z endorsement preferred), and at least three years of bus preventative maintenance experience. Strong diagnostic, tool and documentation skills are required.

  Cummins Insite, Power Spec, QSOL, Allison diagnostics, ZF diagnostics, Thermo King diagnostics

• 1 mois

  Train Architecture Manager

  Saint-Bruno, QC

  

  Alstom

  7+ ansCandidates need a mechanical engineering degree, ideally with railway experience, and 7 to 10 years of relevant experience. Strong communication skills, bilingual French and English, and a customer-focused, organized approach are required.

  Mechanical engineering, Ergonomics, Regulatory compliance, Design process, Process improvement, Communication skills

  1 mois

  Onboard Installation Technician

  Whitby, ON

  57k–74k $/an

  

  Alstom

  Candidates need a diploma or certification in mechanical engineering technology, industrial maintenance or a related field, or a technical high-school diploma. Experience with pneumatic systems and piping, EHS and lockout/tagout practices, and teamwork is needed; railway experience and Ontario skilled trade certification are assets.

  precision power tools, jigs, fixtures, APSYS

• 1 mois

  CNC Machinist

  Ontario

  Temps plein

  

  Masco

  Candidates need a Certificate of Qualification as a Machinist (429A or equivalent) and CNC lathe programming skills. They must read blueprints and machine manuals, use measuring devices, and know grinding, turning, drilling, milling and heat treating.

  CNC lathes, Citizen, Hanwha, Miyano, Hardinge, Fanuc

• 1 mois

  Shop Technician - Industrial Mechanic

  Saskatoon, SK

  Temps plein

  AI

  Applied Industrial Technologies LP

  5+ ansCandidates need at least 5 years of hands-on hydraulic experience and a journeyman industrial or heavy-duty mechanic certificate or technical school program. Strong mechanical aptitude, schematic reading, tool proficiency and oral and written communication are required.

  Flow meters, Pressure gauges, Test benches, Torque wrenches, Hydraulic hoses, Steel tubing

• 1 mois

  Journeyman Appliance Technician - Future Opportunities

  Leroy, SK

  Temps plein

  

  ATCO Group

  3+ ansCandidates need journeyperson appliance technician certification, 3 to 5 years of appliance repair experience, and a General Gas Fitter licence. Fall arrest, confined space and elevated work platform certificates are also required, along with strong communication and safety habits.

  ServiceMax, Microsoft Office, meters, gauges, hand tools, power tools

• 1 mois

  CNC Milling Operator & Programmer

  Canada

  35–40 $/hTemps plein

  

  Remote People

  3+ ansCandidates need a mandatory technical diploma in machining or manufacturing, 3+ years of CNC mill operation and programming, and Mastercam skills. They must read engineering drawings and GD&T, use precision measuring tools, and work independently to meet deadlines.

  Haas CNC mill, Mastercam, AutoCAD, Micrometers, Calipers, Gauges

16 entreprises