Emplois “Compressor” au Canada – Page 32

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Gas Compression Field Technician

  Edmonton, AB +3

  Temps plein

  

  Finning

  2+ ansCandidates need a Journeyperson Heavy Duty Mechanic certification, a valid Class 5 licence with a clean driver's abstract, and at least two years of gas engine, compressor and service truck experience.

  Caterpillar G3600, service truck

  1 mois

  Rotating Equipment Specialist

  Edmonton, AB +4

  Temps plein

  

  Finning

  8+ ansCandidates need a Red Seal Journeyperson as a Heavy Duty Mechanic or Millwright, and 8+ years of rotating equipment experience is an asset. Strong Caterpillar knowledge, root cause failure analysis skills, and good communication with customers are also needed.

  Caterpillar equipment, condition monitoring systems

• 1 mois

  Licensed Maintenance Mechanic

  Canada

  36–39,24 $/hTemps plein

  CC

  CAN Canada

  3+ ansCandidates need a Red Seal Millwright certification, Grade 12 or equivalent, and 3 years of post-apprenticeship industrial maintenance experience. Conveyor belt maintenance experience, electrical schematic knowledge, radio communication ability and good interpersonal skills are also required.

  air compressor, welding equipment, hydraulic pumps, motor starters, bulk carts

• 1 mois

  AltaGas - Millwright/Heavy-Duty Mechanic, Terminal Operations (REEF)

  Prince Rupert, BC

  135k–146k $/anTemps plein

  

  AltaGas Ltd.

  5+ ansCandidates need a Red Seal Journeyman Millwright or Heavy Duty Mechanic certification, 5+ years of industrial mechanical maintenance experience, and strong knowledge of rotating equipment. Maximo experience, a Class 5 driver's licence and strong safety awareness are also required.

  Maximo

• 1 mois

  HazMat Industrial Services Driver/Tech – AZ - CANADA

  Tilbury, ON

  Temps plein

  

  ENVIRONMENTAL SERVICES, INC.: Republic Services provides the most complete set of recycling, waste and environmental solutions from a single provider.

  Candidates need a Class AZ commercial driver's licence with hazmat and tanker endorsements, or the ability to obtain them within 90 days. Knowledge of hazmat placarding, load segregation, weight limit laws and basic mechanical and hydraulic systems is expected.

  straight truck, tractor-trailer, roll-off truck, tanker, hand and shop tools, mobile applications

• 1 mois

  HazMat Industrial Services Driver/Tech – AZ - CANADA

  Tilbury, ON

  ?

  • Participates in Site Safety program and required training; • Knowledge of electrical, plumbing, hydraulic, and compressor systems; • Knowledge of pumps, motors, motor controls, instrumentation, metal fabrication, and…

  Characteristics of waste, Inspection, Housekeeping, Plumbing, Attention to detail, Stay alert

• 1 mois

  Mechanical Maintenance Technician-1

  Canada

  Sur placeTemps plein

  

  Amentum

  5+ ansFive years of maintenance experience in industrial HVAC, machine repair or automotive repair; High school diploma or equivalent; Strong electrical skills, including control systems and 480V systems

  CMMS, PLC, Allen Bradley, forklift, overhead crane, hand tools

  1 mois

  HVAC Technician III

  Canada

  Sur placeTemps plein

  

  Amentum

  3+ ansTrois ans d'expérience en entretien CVC/R industriel ou commercial; Licence EPA Universal Refrigeration ou carte ODP; Licence mécanicien de système CVC 313A et certification Gas Tech G2

  Maximo, CMMS, Building automation system, Aerial lift, Microsoft Office

  1 mois

  Mechanical Maintenance Technician-2

  Canada

  Sur placeTemps plein

  

  Amentum

  5+ ansDiplôme d'études secondaires ou équivalent; Cinq ans d'expérience en maintenance (CVC industriel, réparation de machines, ou réparation automobile); Solides compétences électriques, dont systèmes de contrôle et 480 V

  CMMS, PLC, Forklift, Overhead crane, Hoist, Hand tools

• 1 mois

  Technical Manager

  Vaughan, ON

  Temps plein

  CE

  CEC Entertainment Canada, ULC.

  Candidates need electrical, mechanical or electronic repair experience and the ability to read schematics and troubleshoot to the component board level. Military experience, a technical degree or prior electrical or mechanical training is preferred, along with a high school diploma or equivalent.

  Schematics, POS register systems, Pneumatic valves and cylinders, Stage lighting and sound equipment

• 1 mois

  Ammonia Terminal Operator - Brandon

  Brandon, MB

  Temps plein

  CI

  CF Industries Employee Services LLC

  2+ ansCandidates need a high school diploma or equivalent plus about two years of college, military or technical training, or related work experience. They must understand refrigeration, follow operating procedures, use basic computers, communicate well, and obtain HAZMAT technician certification after hire.

  front-end loader, telehandler, aerial work platform, skid steer, rail car mover, pickup truck

• 1 mois

  Apprentice / Journeyperson Millwrights

  Fort Saskatchewan, AB

  Temps plein

  LI

  Ledcor Industrial Limited

  Candidates need a journeyperson millwright ticket, or registration as an apprentice with a provincial training authority. Industrial construction experience is preferred, along with valid government ID and completed project orientations.

  alignment equipment, power tools

• 1 mois

  Operating Engineer

  Stoney Creek, ON

  49,12 $/hTemps plein

  WF

  Winland Foods Canada Inc

  3+ ansCandidates need a Licensed Operating Engineer 3rd Class and ideally 3 to 5 years of experience. Winland Foods also wants troubleshooting and repair skills, good communication, computer literacy, and the ability to work with minimal supervision.

  steam boiler, air compressor, pumps, HVAC systems, computer

• 1 mois

  Senior Stationary Engineer

  Whitby, ON

  Sur placeTemps plein

  

  Patheon Inc

  7+ ansCandidates need a Ontario Stationary Engineer certification of at least 4th Class, a high school diploma and at least 7 years of progressive stationary or utilities experience. A GMP-regulated manufacturing background and Maximo CMMS experience are preferred.

  Maximo, CMMS, Building Automation System, P&ID drawings

• 1 mois

  Contract Gas Plant Operators

  Fort St. John, BC

  Temps plein

  PC

  Pacific Canbriam Energy Limited

  5+ ansCandidates need at least 5 years of facility operating experience, with oil and gas experience preferred. They must hold a 4th class Power Engineering Certificate, a Class 5 driver's licence, First Aid and H2S Alive, and knowledge of compression, refrigeration and stabilization.

  compressors, pumps, valves

  1 mois

  Contract Heavy Equipment Tech or Millwright

  Fort St. John, BC

  Temps plein

  PC

  Pacific Canbriam Energy Limited

  10+ ansCandidates need a Red Seal Journeyman certificate, 10+ years of oil and gas facility experience, and Class 5 licence with First Aid and H2S Alive. Experience with Caterpillar, Waukesha, Ariel and Frick equipment is required, and a fully tooled service truck is needed.

  Caterpillar equipment, Waukesha engines, Ariel compressors, Frick equipment, CMMS, service truck with air compressor

• 1 mois

  Application Support & Training Specialist – HVAC/R

  Brantford, ON

  Sur placeTemps plein

  CC

  Copeland Canada Inc.

  5+ ansCandidates need 5+ years of HVAC/R industry experience, a Certificate of Qualifications 313A (or be enrolled toward it), and strong technical knowledge of refrigeration and air conditioning. They must present well to technical audiences and be legally authorized to work in Canada and travel to the U.S. without sponsorship.

  Copeland tools, Microsoft Office

• 1 mois

  Industrial Engineer - Advanced Industrialisation

  Canada

  Temps plein

  PW

  Pratt & Whitney Canada

  10+ ansDiplôme en ingénierie aéronautique, mécanique, industrielle ou de fabrication (Bac+5); 10+ ans d'expérience en fabrication de composants moteurs aéronautiques; Maîtrise de l'anglais; le français est un atout

  CATIA, Teamcenter, MES, PLM

• 1 mois

  Industrial Maintenance

  Sussex, NB

  Temps plein

  

  Agropur coopérative

  Candidates need industrial electrician or mechanic experience preferred, a 4th Class Power Engineer certificate or willingness to obtain it, and mechanical aptitude. Good communication, a safety and quality mindset, and the ability to lift 25 kg are also required.

  Pumps, Compressors, Boiler, PLC

• 1 mois

  Plant Operator

  Innisfail, AB

  Sur placeTemps plein

  

  Deep Sky

  5+ ansCandidates need a 4th Class Power Engineering certification and 5-10 years of commissioning or operating experience in industrial process plants. Strong troubleshooting, mechanical aptitude, comfort working outdoors and at heights, and willingness to work rotating shifts are required.

  DCS, PLC, pumps, compressors, blowers, heat exchangers

• 1 mois

  Shop Technician

  Concord, ON

  Sur place

  

  SunSource: With over 250 locations and 3,500+ employees, SunSource is the leading value-added industrial distributor and solutions provider for North America’s…

  Candidates need a high school diploma, experience with power and hand tools, saws, machines, tube benders and calipers, and good communication skills. Computer proficiency and the ability to lift 50 lbs are also required, and technical training or certification is preferred.

  lathe, mill, air compressor, cleaning tanks, forklift, crimping machine

• 1 mois

  Cofondateur - Technologie de refroidissement / Product Co-Founder - Next-Generation Cooling Technology

  Montréal, QC

  T

  TandemLaunch: https://www.linkedin.com/company/tandemlaunch/

  Diplôme en génie mécanique, science des matériaux ou domaine technique connexe; Expérience en réfrigération, CVCA ou gestion thermique électronique; Expérience commerciale : gestion de produit, développement des affaires

  Electronics, Collaboration, Supply chain management, Documentation, Mechanical engineering, Materials science

18 entreprises