Emplois “Automotive inspection tools” au Canada – Page 34

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Flat Rate Licensed Autobody Technician

  Hamilton, ON

  CC

  CSN Collision

  3+ ansCandidates need 3+ years of auto body repair experience, with a Red Seal license or registered apprenticeship preferred. I-Car, OEM and welding certifications are favoured, and candidates must have a valid driver's licence and their own tools and safety footwear.

  MIG welder, Compression spot welder, Frame pulling equipment, Measuring equipment, Cutting torch, Power tools

  1 mois

  Flat Rate Licensed Autobody Technician

  St. Catharines, ON

  CC

  CSN Collision

  3+ ansCandidates need 3+ years of auto body repair experience and a Collision Damage Repairer (Red Seal) licence preferred or an apprenticeship in progress. I-Car, OEM and welding certifications are favoured, and a valid driver's licence and own tools are required.

  MIG welder, Compression spot welder, Frame pulling equipment, Frame measuring equipment, Cutting torch, Soldering equipment

  1 mois

  EV Autobody Repair Technician

  Dieppe, NB

  Temps plein

  CC

  CSN Collision

  3+ ansCandidates need at least three years of auto body collision repair experience and a collision repair certificate. Experience with electric or hybrid vehicles, I-CAR welding certification (required within an agreed period after hire) and a valid driver's licence are needed, along with the ability to lift 100 lbs.

  Frame-straightening equipment, Computerized measuring equipment, Welding equipment, Diagnostic scan tools

  1 mois

  Body Shop Licensed Technician

  Gananoque, ON

  Temps plein

  CC

  CSN Collision

  Candidates need previous collision repair experience and strong knowledge of body repair techniques and equipment. A valid automotive technician licence or Red Seal certification is preferred, along with the ability to handle heavy lifting and long periods of standing.

  welding equipment, cutting tools, specialized body repair tools

  1 mois

  Automotive Service Technician

  Hamilton, ON

  CC

  CSN Collision

  Candidates need a 310S licence or significant automotive repair shop experience. They should have strong mechanical knowledge, diagnostic and problem-solving skills, attention to detail, and a valid driver's licence. EV experience is an asset but not required.

  scan tools, alignment equipment, diagnostic equipment

  1 mois

  Autobody Repair Technician

  Dieppe, NB +4

  Temps plein

  CC

  CSN Collision

  3+ ansCandidates need 3+ years of auto body repair and refinishing experience, a collision repair vocational certificate, and I-CAR welding certification. A Red Seal (310B) or registered apprenticeship is preferred, along with a valid driver's licence, own tools and safety footwear.

  MIG welder, Compression spot welder, Frame pulling and anchoring equipment, Power tools, Mitchell, Audatex

• 1 mois

  Operations Manager

  Brantford, ON

  68k–70k $/an

  

  Robert Half

  5+ ansCandidates need at least 5 years in manufacturing operations, production supervision, or a similar leadership role. They should have team leadership and training experience, strong knowledge of manufacturing workflows and safety compliance, and skill with KPIs and ERP or production software.

  ERP system, production software, CRM, Epic

• 1 mois

  Delivery Specialist

  Toronto, ON

  Temps plein

  

  Roam

  1+ ansCandidates need one or more years of customer service experience and at least one year of post-secondary education or experience. They need strong communication skills, attention to detail, and a valid Ontario driver's licence with a clean abstract.

  Zoho, HubSpot

• 1 mois

  Journeyperson Automotive Service Technician

  Fort McMurray, AB

  Temps plein

  

  Kichton Construction

  5+ ansCandidates need a journeyperson automotive technician certificate, a valid Class 5 licence with a good driver's abstract, and ideally 5+ years of dealership experience on Ford, Chevy and Dodge vehicles. They must be fluent in English, pass a drug and alcohol test, and bring their own tools.

  Snap-on scanner, OBD2 scan tool, Cell phone

• 1 mois

  Maintenance Technician

  Vaughan, ON

  Temps plein

  

  The Forest Group

  Candidates need experience maintaining light and heavy vehicles, knowledge of automotive electronics, and skill with diagnostic tools. They must hold an Ontario Vehicle Operator's Permit Class G, have Grade 12 or equivalent, and strongly preferably an Ontario Motor Vehicle License 310T.

  Scanners, Digital meters, Tire balancers, Brake lathes, AC filling and testing equipment, Hand tools

• 1 mois

  Quality Inspector

  Guelph, ON

  60–70 $/hTemps plein

  

  Brunel

  5+ ansCandidates need a degree or diploma in quality, welding or engineering, or a C.E.T. designation, plus more than five years of QA field experience in construction or nuclear work. Strong knowledge of ASME BPVC, B31 and QA/QC standards is required.

  blueprints

  1 mois

  Quality Specialist - LNG Trains & Inlet Gas Facilities Construction

  Kitimat, BC

  Temps plein

  

  Brunel

  5+ ansCandidates need a bachelor's degree in mechanical or a related engineering field and at least five years of quality assurance experience on large capital projects. LNG or oil and gas experience, quality management system skills and risk tools such as Bowtie analysis are strongly preferred.

  Leadership, Process improvement, Quality assurance procedures, Quality assurance, Regulatory compliance, Inspection

• 1 mois

  Manufacturing Technician

  Woodstock, ON

  28,90–33,90 $/hTemps plein

  A

  AMTB

  Candidates need Grade 12 or GED and previous manufacturing experience. Visual work instructions, basic math, strong communication and exposure to robotics or automation are required; welding, ISO14001 and TS16949 exposure are assets.

  Overhead crane, Automated manufacturing equipment, Robotics

  1 mois

  Manufacturing Technician

  Woodstock, ON

  30,80 $/hTemps plein

  A

  AMTB

  Candidates need previous experience in a manufacturing environment and the ability to follow visual work instructions. General math skills, good communication, problem-solving ability and comfort working under pressure with minimal supervision are also needed. Robotics, welding, ISO 14001 and TS16949 exposure are assets.

  Overhead crane, Automated manufacturing equipment, Robotics, Computerized production systems

  1 mois

  Manufacturing Technician

  Woodstock, ON

  30,80 $/hTemps plein

  A

  AMTB

  Candidates need previous experience in a manufacturing environment and the ability to follow visual work instructions. General math skills, good communication, problem-solving ability and comfort working under pressure with minimal supervision are also needed. Robotics, welding, ISO 14001 and TS16949 exposure are assets.

  Overhead crane, Automated manufacturing equipment, Robotics, Computerized production systems

  1 mois

  Millwright (Rotating/Steady Midnights)

  Ingersoll, ON

  Temps plein

  A

  AMTB

  5+ ansCandidates need a Licensed Industrial Millwright (433A) in Ontario and at least 5 years of automotive or heavy manufacturing experience. Strong mechanical aptitude with hydraulics, pneumatics, conveyors and gear systems, and willingness to work shifts, weekends and overtime, are also required.

  hand tools, power tools, vibration analysis equipment, thermography equipment, CMMS, PLC

  1 mois

  Tool & Die Maker (Midnights)

  Ingersoll, ON

  Temps plein

  A

  AMTB

  3+ ansCandidates need a Tool and Die certification and at least 3 years of experience as a tool maker in manufacturing, ideally in steel blanking or metal stamping. They should be skilled with manual machines, precision measuring tools and technical drawings, and be detail-oriented with strong problem-solving skills.

  lathe, grinder, overhead crane, precision measuring instruments, hand tools, machine shop tools

• 1 mois

  Production Worker

  West Kelowna, BC

  Sur placeTemps plein

  PI

  Procore International Radiators

  Candidates need basic mechanical aptitude, comfort with hand and power tools, and attention to detail. Reliability, a focus on safety and quality, and willingness to learn new equipment are also required.

  hand tools, power tools

• 1 mois

  Oil Change Technician & Customer Service Rep

  Brantford, ON

  

  Great Canadian Oil Change

  Candidates need to be friendly, eager to learn, and comfortable working as part of a team. They must be able to lift up to 50 pounds occasionally, stand for long periods, climb stairs, and work with their hands above their head.

  Customer service, Preventive maintenance, Heavy lifting

  1 mois

  Oil Change Technician & Customer Service Rep

  Schomberg, ON

  

  Great Canadian Oil Change

  Candidates need to be friendly, eager to learn, and comfortable working as part of a team. They must be able to lift up to 50 pounds occasionally, stand for long periods, climb stairs, and work with their hands above their head.

  Customer service, Preventive maintenance, Heavy lifting

  1 mois

  Oil Change Technician & Customer Service Rep

  Kingston, ON

  

  Great Canadian Oil Change

  Candidates need to be friendly, eager to learn, and comfortable working as part of a team. They must be able to lift up to 50 pounds occasionally, stand for long periods, climb stairs, and work with their hands above their head.

  Customer service, Preventive maintenance, Heavy lifting

  1 mois

  Oil Change Technician & Customer Service Rep

  Napanee, ON

  

  Great Canadian Oil Change

  Candidates need to be friendly, eager to learn, and comfortable working as part of a team. They must be able to lift up to 50 pounds occasionally, stand for long periods, climb stairs, and work with their hands above their head.

  Customer service, Preventive maintenance, Heavy lifting

  1 mois

  Oil Change Technician & Customer Service Rep

  Hamilton, ON

  

  Great Canadian Oil Change

  Candidates need to be friendly, eager to learn, and comfortable working as part of a team. They must be able to lift up to 50 pounds occasionally, stand for long periods, climb stairs, and work with their hands above their head.

  Customer service, Preventive maintenance, Heavy lifting

• 1 mois

  Sr Vehicle Technician - Heavy Duty

  Mississauga, ON

  Temps plein

  

  Federal Express Corporation Canada

  3+ ansCandidates need a high school diploma or GED, an automotive or truck and coach technician certification, and a valid G licence with a good driving record. Three years of fleet experience is required, with fleet maintenance an asset.

  JPRO Professional Heavy Duty Software, Allison DOC Fleets, Cummins Insite Professional, Ford IDS with VCM-2 Rotunda, Detroit Diesel Diagnostic Link, Mercedes diagnostic software

10 entreprises