Blender Operator
Kitchener, ONRandstad Canada
1+ ansCandidates need at least one year of active forklift experience, comfort wearing a respirator with a clean-shaven face, and the ability to work in a smoke-free site. Two to three years of manufacturing or logistics experience is preferred.
forklift, high-intensity mixer, ribbon blender, drum tumbler, respirator
Press Operator
Oshawa, ONRandstad Canada
Candidates need good hand-eye coordination and the ability to work in a team. Prior quality experience is a bonus, and comfort working around manufacturing machines is expected.
Manufacturing machines
Picker/Packer
Guelph, ONRandstad Canada
1+ ansCandidates need at least one year of warehouse experience, comfort with occasional heavy lifting up to 50 lbs, safety shoes, attention to detail, basic math and reading skills, and good communication. Dock stocker experience is an asset.
RF scanner, manual order picker, reach forklift
310J Mechanic | Oshawa | Day Shift
Oshawa, ONRandstad Canada
Candidates need a licensed 310J Trailer Technician credential, or a 310T, 310S or senior 310J apprentice with strong trailer setup experience. They need solid diagnostic skills for air brake, 12V wiring, suspension and hydraulic systems.
Heavy duty technician, Automotive service technician, Hydraulic fluid
Millwright
Guelph, ONRandstad Canada
5+ ansCandidates need a licensed 433A Industrial Millwright credential and five years of industrial millwright experience, including troubleshooting and preventive maintenance. Experience in automotive settings is an asset, and they must read electrical drawings and schematics.
Electrical drawings, Schematics
310T
Dundas, ONRandstad Canada
5+ ansCandidates need a valid 310T or Red Seal Truck & Coach Technician licence and 5+ years of hands-on commercial tractor-trailer maintenance experience. A Class D/3 licence with air brake endorsement (or the ability to obtain it within 6 months) and the ability to lift up to 50 lbs are also required.
Handheld diagnostic computers, Motor analyzers, Welding equipment, Hydraulic equipment, Electronic work order system
Machine Operator
Guelph, ONRandstad Canada
1+ ansCandidates need a high school diploma or GED, at least one year of manufacturing experience and full English reading, writing and speaking. Physical stamina for standing for long shifts, lifting up to 55 lbs and wearing PPE are also required.
forklift, computer-controlled equipment interfaces
Maintenance Administrator
Guelph, ONRandstad Canada
2+ ansCandidates need a high school diploma or equivalent and 2+ years in inventory control, crib attendant, parts coordination or maintenance purchasing, ideally in manufacturing or automotive. They must read parts lists and specifications, and use MS Office and CMMS/ERP systems.
MS Excel, MS Word, Outlook, CMMS, ERP
Night Shift Electrician
Elora, ONRandstad Canada
Candidates need a valid Industrial Electrician license (309A or 442A) and hands-on electrical troubleshooting experience in heavy manufacturing. They should know PLCs, motors, drives and relay logic and be comfortable working safely around presses and extruders.
PLC, Presses, Extruders, Battery charging stations
Night Shift Millwright
Elora, ONRandstad Canada
Randstad Canada needs a valid Industrial Millwright 433A licence, solid mechanical and basic electrical troubleshooting experience in heavy manufacturing, and hands-on work with hydraulics, pneumatics, gearboxes and pumps. Candidates must follow strict safety and lockout procedures and work a night shift with minimal supervision.
Millwright, Troubleshooting, Welding, Lockout/tagout, ISO 9001, Troubleshooting electrical systems
Warehouse Associate - Customer Service
OntarioRandstad Canada
2+ ansCandidates need at least two years of warehouse or material handling experience, prior customer-facing work such as counter sales or call handling, and hands-on dockstocker experience. A forklift licence is an asset, and on-site certification is provided. Candidates must be able to lift up to 50 lbs, stand for long periods and climb ladders.
Dockstocker, Forklift
Industrial Electrician
Mississauga, ONRandstad Canada
8+ ansCandidates need a valid Ontario Industrial Electrician (442A) or Construction & Maintenance Electrician (309A) certificate and at least 8 years of hands-on maintenance experience in a manufacturing or automotive plant.
PLC, VFD, vision systems, sensors, industrial networks
Senior CNC Machinist
Oakville, ONRandstad Canada
Candidates need proven senior CNC machining experience in high-mix, low-volume manufacturing, with advanced experience on 5-axis Fanuc-controlled mills. They must read blueprints and edit G-code and M-code at the control, and have machined titanium, Inconel and stainless steel.
5-axis CNC mills, Matsuura, Nakama, GF CNC mills, Fanuc controls
CNC Machinist
Uxbridge, ONRandstad Canada
Candidates need proven experience operating multi-axis lathes or 4-axis and 5-axis vertical machining centers. Strong blueprint reading, G- and M-code interpretation, familiarity with Fanuc or Heidenhain controls, and reliable transportation to Uxbridge are required.
Fanuc control, Heidenhain control, 4-axis VMC, 5-axis VMC, 9-axis lathe
Welder or Fitter-Welder
Mississauga, ONRandstad Canada
2+ ansCandidates need active 1G and 2G Flux Core certifications from the CWB. They need 2 years of welding experience, or 5 years for the fitter-welder role, plus the ability to interpret engineering blueprints.
MIG welding machine, Flux Core welding machine
Stick Welder-Fitter
Waterloo, ONRandstad Canada
3+ ansCandidates need at least 3 years of hands-on stick welding in a structural steel setting, and fitting experience at a construction site or fabrication shop. Strong blueprint reading, shop equipment skills, a valid Ontario Class G licence and a reliable personal vehicle are required.
cutters, grinders, drills, bolts and fasteners
Warehouse Worker - Paris, ON
Paris, ONRandstad Canada
Candidates need prior production or general labour experience, ideally in a warehouse or manufacturing setting, and must be able to lift up to 50 lbs. Reliable transportation is required, and experience with hand tools such as hammers and air tools is an asset.
hammers, air tools, hand tools, blueprints
General Warehouse worker - Kingston
Kingston, ONRandstad Canada
Randstad Canada needs candidates with prior warehouse or inventory experience, not general labour only. They need strong numerical skills, high attention to detail, and the physical ability to lift manually and work safely on ladders.
RF scanner, ladder
General Warehouse worker - Kingston
Amherstview, ONRandstad Canada
Randstad Canada needs candidates with prior warehouse or inventory experience, not general labour only. They need strong numerical skills, high attention to detail, and the physical ability to lift manually and work safely on ladders.
RF scanner, ladder
Service Technician
Mississauga, ONRandstad Canada
3+ ansCandidates need at least 3 years of hands-on high-voltage industrial electrical troubleshooting (480V/600V, VFDs, control panels, ladder logic) and mechanical maintenance experience. They must work independently, hold a valid Ontario G licence with a clean driving record, and a Millwright or Electrician trade licence is an asset.
digital multimeter, PLC, precision tools, diagnostic equipment
Industrial Mechanic
Brampton, ONRandstad Canada
Candidates need a strong natural aptitude for mechanical troubleshooting and practical hands-on experience maintaining machinery in manufacturing or packaging. They must read basic mechanical drawings, diagrams and manuals, and be willing to complete 6 to 12 months of day-shift training followed by a 3-shift rotation.
manuals, mechanical drawings, diagrams
Reach Truck / Dockstocker / Walkie Operator
Calgary, ABRandstad Canada
1+ ansCandidates need valid forklift licences for reach truck, dock stocker and walkie, at least one year operating these machines, and one to two years of warehouse or logistics experience. They must be available to start immediately and have a reliable vehicle.
Reach truck, Dock stocker, Walkie, RF scanner
Propane Forklift Operator Night-Guelph
Guelph, ONRandstad Canada
2+ ansCandidates need current external forklift certification and at least 2 years of counterbalance forklift experience. They must be comfortable working in a dynamic, fast-paced environment.
forklift, towmotor, tugger, counterbalance forklift, propane forklift
Wire Cutting Associate
Kingston, ONRandstad Canada
Candidates need attention to detail, basic math with measurements and fractions, and the ability to read order documents. Warehouse or wire-cutting experience is an asset, and the job involves lifting up to 50 lbs and standing for long periods.
wire-cutting equipment, WMS