Emplois “Schematic software” au Canada – Page 36

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Digital Payload Architect

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  10+ ansCandidates need a master's or bachelor's in electrical engineering, aerospace or physics with 10+ years of digital regenerative payload design experience on LEO or MEO missions. They need strong knowledge of digital communications, DSP and satellite protocols, plus excellent technical writing and communication skills.

  MATLAB, Simulink, SystemView, Python, Confluence, JIRA

  1 mois

  Intermediate Electronics Validation and Test Engineer/Designer

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  5+ ansCandidates need an engineering degree and at least 5 years testing electronic systems, including high-speed digital and RF communications above 20 GHz. Strong scripting skills in Python and MATLAB, protocol knowledge, and hands-on lab instrument experience are required.

  oscilloscope, network analyzer, spectrum analyzer, arbitrary waveform generator, SPI bus analyzer, JTAG interface

  1 mois

  Systems Engineer, Synthetic Aperture Radar (SAR) Payload

  Richmond, BC +1

  95k–130k $/anTemps plein

  

  MDA

  5+ ansCandidates need a degree in electrical engineering, computer science or physics and 5+ years supporting remote sensing system development and testing on LEO or MEO missions. Strong technical writing, presentation skills, Confluence and JIRA experience, and English communication are required; French is an asset.

  Confluence, JIRA, PLM

  1 mois

  Intermediate Systems MTS, Synthetic Aperture Radar (SAR)

  Richmond, BC

  78k–100k $/anTemps plein

  

  MDA

  2+ ansCandidates need a bachelor's degree in electrical, computer or engineering physics, at least 2 years of complex digital systems work, and digital signal processing knowledge. They also need MATLAB, Excel, C/C++ or Python, Jira and Confluence skills, plus reliability-level security clearance and a Controlled Goods Program assessment.

  MATLAB, Python, Jira, Confluence

  1 mois

  Junior Electronics Validation and Test Engineer/Designer

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  Candidates need an engineering degree, interest in testing electronic systems including high-speed digital and RF communications, and 0 to 2 years of experience. Knowledge of test automation, scripting, MATLAB and Python is required, with lab instrumentation and circuit design knowledge expected.

  MATLAB, Python, Jenkins, oscilloscope, network analyzer, spectrum analyzer

  1 mois

  Engineering Student - PCB Design and Electronic Integration - Winter 2027

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  Candidates need a fifth semester completed toward an electrical engineering bachelor's degree, plus initiative and a strong desire to learn. Experience with PCB design, electronics testing, Matlab, Python, C/C++ or PSPICE is an asset, and French and English are valued.

  PCB design software, Matlab, Python, C/C++, PSPICE, Siemens Mentor Graphics

  1 mois

  Engineering Student - Digital Electronics Test Station Design - Winter 2027

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  Candidates need at least five sessions completed in an engineering degree, an interest in electronics testing, and an understanding of electronic circuits and communication protocols. PCB design experience and lab instrument experience with oscilloscopes are required, and good English and French communication is ideal.

  Oscilloscope, Network analyzer, Spectrum analyzer, Arbitrary waveform generator

  1 mois

  Engineering Student - PCB Design and Electronic Integration - Winter 2027

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  MDA Space needs candidates who have completed fifth semester of an electrical engineering degree. Helpful skills include Matlab, Python, C/C++, PSPICE or Mentor Graphics, PCB testing experience and French-English bilingualism.

  Matlab, Python, C/C++, PSPICE, Siemens Mentor Graphics

• 1 mois

  Field Service Technician - Kingston

  Limoges, ON

  Temps plein

  

  Toromont Material Handling

  Candidates need a licensed technician or equivalent hands-on experience, strong electrical and engine knowledge, and the ability to read electrical and hydraulic schematics. A valid driver's licence and strong troubleshooting skills are required, while forklift experience and French bilingualism are assets.

  OEM diagnostic software, Caterpillar testing equipment, forklift, service truck

• 1 mois

  Design Manager

  Burlington, ON

  Temps plein

  

  Alberici Canada

  7+ ansCandidates need a post-secondary degree or diploma in architecture, design, engineering or construction management, at least 7 years of design management experience and 2 years of field experience. Experience with multiple contract models and construction scheduling is required.

  contract software

  1 mois

  Preconstruction Manager (Korean Bilingual)

  Burlington, ON

  Temps plein

  

  Alberici Canada

  5+ ansCandidates need 5 to 10 years of experience in estimating, preconstruction, operations, engineering or project management, plus professional fluency in English and Korean. Post-secondary education in a related field is preferred, and experience with heavy civil, industrial or infrastructure projects is required.

  Estimating software, Scheduling software, Document control software

• 1 mois

  Field Service Technician - Kingston

  Limoges, ON

  Temps plein

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  Candidates need a licensed technician or equivalent hands-on experience, strong knowledge of 24V to 80V electrical systems and combustion engines, and the ability to read electrical and hydraulic schematics. A valid driver's licence is required, and forklift experience and English-French bilingualism are assets.

  OEM diagnostic software, Caterpillar testing equipment, forklift

• 1 mois

  Project Manager

  Prince Rupert, BC

  Temps plein

  

  PRPA

  3+ ansCandidates need a university degree in a relevant engineering discipline and P.Eng., EIT or BC registration eligibility, with 3 to 5 years of related experience. Strong leadership, communication, analytical and multi-project management skills are required, along with proficiency in MS Project and AutoCAD.

  MS Project, AutoCAD, MS Office, preventive maintenance software

• 1 mois

  Control Room Operator

  Grande Prairie, AB

  

  Paramount Resources Ltd.: is an independent, intermediate Canadian energy company.

  6+ ansCandidates need at least six years of gas plant operations, including three years on a DCS console in a large sour processing facility. Experience with amine sweetening, glycol dehydration, compression and acid gas injection, plus DeltaV or similar DCS and SCADA platforms, is required.

  DeltaV, SCADA, HMI, Maximo, Microsoft Office

• 1 mois

  Supervisor, Temple Facilities Assistant - Toronto Temple

  Brampton, ON

  42,82–54 $/hSur placeTemps plein

  C

  Church

  4+ ansCandidates need a bachelor's degree in facilities management or a professional certification or licence in plumbing, electrical, HVAC or landscaping, plus 4 years of physical plant experience in skilled trades. Strong leadership and training skills, knowledge of health and safety rules, basic computer skills and a current Temple Recommend are required.

  FMAT, TFIS, computerized HVAC controls, water treatment equipment, projection and sound systems

• 1 mois

  Site Service Manager

  Calgary, AB

  SS

  Schaefer System International Limited

  2+ ans2+ gestionCandidates need a 4-year degree or equivalent experience, at least 2 years in automated material handling or industrial automation, and 2 years of people management. Strong electrical and controls knowledge (PLCs, servo drives, AC motors), KPI analysis skills and fluent English are also required.

  PLC, Servo drives, PC controllers, Encoders, Microsoft Office, AS/RS

• 1 mois

  Millwright- Continental Day Shift

  Woodbridge, ON

  Temps plein

  PI

  Pliteq Inc

  4+ ansCandidates need a Certified Industrial Mechanic Millwright (433A) designation, completed secondary school, a recognized Millwright apprenticeship or equivalent, and at least 4 years of industrial manufacturing experience. Strong mechanical and electrical skills, PLC and motor control knowledge, and a clear criminal record check are also required.

  PLC, bench grinder, lathe, milling machine, drilling machine, counterbalance forklift

  1 mois

  Millwright- Continental Night Shift

  Woodbridge, ON

  Temps plein

  PI

  Pliteq Inc

  4+ ansCandidates need a Certified Industrial Mechanic Millwright (433A) designation, completed secondary school and a recognized Millwright apprenticeship, and at least 4 years of millwright experience in industrial manufacturing. Strong mechanical and electrical knowledge, PLC and motor control skills, and the ability to lift 50 lbs and work at heights are also needed.

  lathe, milling machine, bench grinder, forklift, elevated work platform, maintenance software

• 1 mois

  Commissioning Technologist

  Edmonton, AB

  Temps plein

  

  Iconic Power Systems Inc.

  2+ ansCandidates need a diploma or degree in electrical engineering, electronics or a related field, and 2+ years of power systems commissioning and testing experience, preferably in high voltage substations. They also need a valid Class 5 driver's licence and must be willing to travel.

  Omicron, Doble, Megger, multimeter, power analyzer, SEL relays

• 1 mois

  Security Systems Technician

  Calgary, AB

  CT

  Convergint Technologies Ltd

  3+ ansCandidates need three to five years of experience with electronic security systems and security system programming, strong troubleshooting and electrical aptitude, and the ability to read blueprints. A valid driver's licence is required, and an electronics diploma and vendor certifications are preferred.

  Drill, Screwdriver, Wire stripper, Hacksaw, Crimper, Advanced test instruments

• 1 mois

  Building Operator

  Toronto, ON

  Temps plein

  

  BGIS

  5+ ansCandidates need BES Class 1 and Class 2 certification and five or more years of operations and maintenance experience, plus a technical diploma or apprenticeship. They must be physically able to climb ladders, work in confined spaces and lift up to 50 lbs, and be willing to work shifts and on call.

  Metasys, computerized maintenance management system, hand tools, power tools, forklift

  1 mois

  Building Operator - Millwright

  Toronto, ON

  Temps plein

  

  BGIS

  2+ ansCandidates need a high school education, up to 2 years of facility operations work and BES Class 1 and Class 2 certification. Physical fitness for ladders, confined spaces and lifting 50 lbs is required.

  Metasys, computerized maintenance management system

• 1 mois

  Co-op, Embedded Software

  Hamilton, ON

  EI

  Enedym Inc

  Candidates need C and C++ firmware experience for microcontrollers, plus Python scripting. Experience reading schematics and using lab debugging tools such as oscilloscopes is essential, and recent graduates or students are welcome to apply.

  oscilloscope, logic analyzer, multimeter, Git, CMake, Make

• 1 mois

  Electronics Engineer, Diagnostics & Data Acquisition

  Richmond, BC

  

  General Fusion Inc

  10+ ansCandidates need a bachelor's degree in electrical or electronics engineering and at least 10 years of progressive experience deploying electronic systems. They also need hands-on skill with noisy, high-voltage measurement, analog design and Altium.

  Altium, LTSpice, LabVIEW, Beckhoff TwinCAT, PLC, Python

14 entreprises