Emplois “automatic equipment” au Canada – Page 38

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Hydrovac Operator

  Toronto, ON

  35,52–47,36 $/hSur placeTemps plein

  B

  Badger

  Candidates need a valid 1, 3 or DZ licence (A-D in Ontario) with an airbrake endorsement. First aid, Ground Disturbance and CSTS are preferred, along with the physical stamina to lift 50+ pounds in all weather.

  hydrovac equipment, hydrovac truck, manual transmission truck

  1 mois

  Hydrovac Operator

  Bowmanville, ON

  29,42–39,23 $/hSur placeTemps plein

  B

  Badger

  Candidates need a valid Class 1, 3 or DZ licence (Class A-D in Ontario) with an air brake endorsement. First aid, ground disturbance and CSTS are preferred, plus experience with manual transmissions and the ability to lift 50+ pounds.

  hydrovac equipment, hydrovac truck, manual transmission truck

  1 mois

  Hydrovac Operator

  Fort McMurray, AB

  Sur placeTemps plein

  B

  Badger

  Candidates need a valid 1, 3 or DZ licence (A-D in Ontario) with an airbrake endorsement, and first aid, Ground Disturbance and CSTS training is preferred. Strong physical stamina, lifting 50+ pounds, flexibility for variable extended shifts, and local residence in or near Fort McMurray are required.

  hydrovac truck, hydrovac equipment, high-pressure water system, vacuum system

  1 mois

  Hydrovac Operator

  Red Deer, AB

  34 $/hSur placeTemps plein

  B

  Badger

  Candidates need a valid Class 1, 3 or DZ licence (Class A-D in Ontario) with an airbrake endorsement. Preferred are first aid, Ground Disturbance and CSTS tickets, manual transmission driving experience and prior hydrovac or industrial work; the role requires lifting 50+ pounds and working in varied weather.

  hydrovac truck, high-pressure water system, vacuum system

  1 mois

  Hydrovac Operator

  Regina, SK

  Sur placeTemps plein

  B

  Badger

  Candidates need a valid 1, 3 or DZ licence (A-D in Ontario) with an airbrake endorsement, manual transmission driving experience preferred, and the ability to lift 50+ pounds in all weather.

  hydrovac truck, hydrovac equipment, high-pressure water system, vacuum system

  1 mois

  Hydrovac Operator

  Bradford, ON

  29,42–39,23 $/hSur placeTemps plein

  B

  Badger

  Candidates need a valid Class 1, 3 or DZ licence (Class A-D in Ontario) with an air brake endorsement. First aid, ground disturbance and CSTS are preferred, plus experience with manual transmissions and the ability to lift 50+ pounds.

  hydrovac equipment, hydrovac truck, manual transmission truck

  1 mois

  Opérateur Hydrovac

  Montréal, QC

  Sur placeTemps plein

  B

  Badger

  Permis de conduire classe 1 ou 3, mention F ou M préférée; Formations en sécurité : ASP, SIMDUT, premiers soins, H2S, espaces clos; Capacité de soulever, pousser, tirer plus de 50 livres

  équipement hydrovac, camion hydrovac

• 1 mois

  Welding Apprentice

  North Vancouver, BC

  

  Seaspan: The scope of Seaspan's services, the quality of its employees and over a century of successful participation in coastal commerce, make the company a…

  Candidates need Grade 12, completion of the B.C. Welder Foundation Program and a valid CWB FCAW All Position M Class (Marine Annex) ticket. Good English communication and the ability to work in confined spaces at height are also needed.

  welding equipment, grinder, chipping gun

• 1 mois

  Welder (Job Shop) - Intermediate - Day Shift

  Etobicoke, ON +1

  Sur placeTemps plein

  SM

  S&C Minimal

  3+ ansCandidates need 3 to 4 years of welding experience in manufacturing, automotive or a related field, plus knowledge of MIG welding, metallurgy, welding symbols and safety standards. They must pass a welding skills test and read moderately complex blueprints, and robotic welding programming knowledge is an asset.

  MIG welder, robotic welding system, hoist, lift, hand truck, blueprints

• 1 mois

  Injection Molding Process Engineer

  London, ON

  Sur placeTemps plein

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  3+ ansStarlim North America needs a college diploma or technical apprenticeship and 3 to 5 years of fully automatic injection molding experience. Candidates should know quality systems such as ISO 9001, TS 16949, ISO 13485 and APQP, and have experience with 8D complaint resolution and reading technical drawings.

  injection molding machine, robotics, gauges and measuring equipment, crane, hoist

  1 mois

  Process Technician

  London, ON

  Sur placeTemps plein

  

  Starlim North America: Starlim is one of the world’s largest liquid silicone injection molders and manufacturer, serving as an industry leader in the mass production of…

  2+ ansCandidates need a college diploma plus an apprenticeship or equivalent, and two to three years of experience running fully automatic injection molding. Experience with quality systems such as ISO 9001 or ISO 13485 and strong problem-solving and technical drawing skills are expected.

  Measuring equipment and gauges, Robotics

• 1 mois

  Senior Commissioning Project Manager

  Toronto, ON

  110k–160k $/anHybrideTemps plein

  

  Veolia Environnement SA

  7+ ansVeolia North America needs candidates with a BSc or MSc in Electrical Engineering and at least 7 years of commissioning experience, including mission critical facilities. Candidates need strong knowledge of high and medium voltage systems, test instrumentation and NETA standards, and must be immediately eligible to work in Canada.

  Test instrumentation, Electrical power monitoring system, Building management system, PLC

  1 mois

  Senior Project Manager, Electrical Commissioning

  Edmonton, AB

  TélétravailTemps plein

  

  Veolia Environnement SA

  15+ ansCandidates need at least 15 years in the electrical or mission critical industry, with commissioning and project management experience. They must know high and medium voltage power systems, building controls, and safety standards such as NETA and CSA Z462.

  SCADA, PLC, BMS, Modbus, TCP/IP, CANbus

• 1 mois

  Detailer - Stratford Hyundai

  Stratford, ON

  18–20 $/hSur placeTemps plein

  4A

  401 Auto

  Candidates need previous detailing experience, a valid G driver's licence with a clean driving record, and the ability to drive both automatic and manual vehicles. Strong organization, multi-tasking and attention to detail are also needed.

  vacuum

  1 mois

  Detailer/Lot Attendant - Mission Motors

  Wawa, ON

  18–20 $/hSur placeTemps plein

  4A

  401 Auto

  Candidates need previous detailing experience, a valid G driver's licence with a clean driving record, and the ability to drive both automatic and manual vehicles. Strong organization, multitasking and attention to detail are also expected.

  Power washing equipment, Vacuum, Shampoo equipment

  1 mois

  Detailer - Cambridge Automart

  Cambridge, ON

  18 $/hSur placeTemps plein

  4A

  401 Auto

  401 Auto needs candidates with previous detailing experience, a valid G driver's licence and a clean driving record. Candidates must be able to drive both automatic and manual vehicles and be well organized with strong attention to detail.

  vacuum, cleaning supplies

  1 mois

  Detailer - Woodstock Nissan

  Woodstock, ON

  18–20 $/hSur placeTemps plein

  4A

  401 Auto

  Candidates need previous detailing experience, a valid G driver's licence with a clean driving record, and the ability to drive both automatic and manual vehicles. Strong organization, multitasking and attention to detail are required.

  vacuum

  1 mois

  Detailer - Kitchener

  Kitchener, ON

  20 $/hSur placeTemps plein

  4A

  401 Auto

  Candidates need previous detailing experience, a valid G driver's licence with a clean driving record, and the ability to drive both automatic and manual vehicles. Strong organization, multitasking and attention to detail are needed.

  Power washing equipment, Vacuum

• 1 mois

  Laundry Aide (Casual)

  Burlington, ON

  Temps partiel

  

  Chartwell

  Candidates need prior laundry or similar experience and a good understanding of proper laundry practices. The job also requires lifting.

  washing machine, dryer, iron, sewing machine

• 1 mois

  Firefighter (2026-01)

  Mission, BC

  Sur placeTemps plein

  

  City of Mission

  2+ ansCandidates need Firefighter Level 2 (NFPA 1001) or paid-on-call or one year of career experience, a BC Class 3 driver's licence, EMLAB BC First Responder, and Grade 12 plus post-secondary or two years of work experience. They must be physically fit to NFPA 1582 and Canadian citizens or permanent residents.

  fire apparatus, rescue equipment, Microsoft Office

• 1 mois

  Senior Electrical Engineer

  Toronto, ON

  Sur placeTemps plein

  

  Armstrong Fluid Technology: With advanced solutions that leverage edge computing, IoT, machine learning, digital twin technology and demand-based control, Armstrong provides…

  10+ ansCandidates need a Bachelor's or master's degree in electrical engineering, an Eng designation, and at least 10 years designing industrial or mission-critical electrical systems. Experience with industrial panels, global regulatory certification, and formal BOM and drawing release is required.

  Research, Regulatory compliance, Electrical engineering, Change management, IBM Power Systems, HVAC

• 1 mois

  Opérateur de presse à comprimés / Production pharmaceutique

  Saint-Hubert, QC

  Sur placeTemps plein

  K

  KABS

  3+ ansDEC de trois ans en discipline scientifique obligatoire; Baccalauréat en génie chimique ou microbiologie un atout; 3 à 5 années d'expérience requises

  Manesty Beta Press, GlobePharma, Profiller, mélangeur planétaire, mélangeur en V, compteuse automatique de capsules et comprimés

• 1 mois

  Companion Animal Research Technician - Level 2

  Fergus, ON

  Sur placeTemps plein

  

  Transpharmation Inc: Transpharmation’s Facilities Management Company, Agenda Life Sciences, are one of only 14 establishments to hold the globally recognised AAALAC…

  2+ ansTranspharmation requires a veterinary diploma or B.Sc. in a relevant field, plus at least 2 years of research technician experience in a laboratory. Candidates must know GLP, ISO 17025, CCAC rules, and computer software such as Microsoft Office.

  Centrifuge, Biosafety cabinet, Fume hood, Ethovision, ZenoWalkway forcemat, Actical

• 1 mois

  Capacity & Demand Planner

  Toronto, ON

  68k–101k $/anSur placeTemps plein

  

  Avery Dennison

  4+ ansCandidates need a bachelor's degree in business, supply chain, engineering or a related field, plus 4 to 5 years in demand, capacity or supply chain planning. Strong Excel, SQL, Python or R skills, ERP familiarity and quantitative forecasting are needed.

  Excel, SQL, Python, R, Google Sheets, SAP

12 entreprises