Emplois “pumping test equipment” au Canada – Page 38

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Senior Procurement Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need an engineering degree and eligibility to be a Professional Engineer in Ontario, plus 10 to 15 years of mechanical or process engineering experience with nuclear or conventional power plant components. Knowledge of nuclear codes and standards such as CSA N285.0, CSA N299 and ASME is preferred.

  Procurement, Quality assurance, Nuclear energy, Technical support, Documentation, Inspection

  1 mois

  Specialist Engineer - Mechanical Equipment

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansAtkinsRéalis needs a registered Professional Engineer with a mechanical, chemical, nuclear or engineering science degree and at least 15 years of experience, including 5 years in the nuclear industry. Candidates need equipment specialization, knowledge of nuclear codes such as CSA N285.0 and ASME Section III, and willingness to travel.

  ASME codes, CSA standards

  1 mois

  Senior Mechanical Engineer - Plant Life/Extension

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  Candu Energy needs a licensed Ontario Professional Engineer with a mechanical, process or nuclear engineering degree and proven plant life management experience. Candidates should know nuclear codes and standards, degradation mechanisms and maintenance analysis methods such as SAM and FMECA.

  SAM software, FMECA tools

• 1 mois

  Truck Mechanic

  Saskatoon, SK

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a journeyman certificate in truck and transport or heavy equipment, a Class 5 licence with a clean driver abstract, and strong mechanical troubleshooting skills. Experience with the SGI Motor Vehicle Inspection Program is an asset, and overtime is expected as needed.

  hand tools, storage toolbox

  1 mois

  Apprentice, Truck Mechanic

  Emerald Park, SK

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need an Apprentice Certificate or willingness to become one, and a Class 5 driver's licence with a clean abstract. Strong mechanical and troubleshooting skills and willingness to work overtime are required.

  Hand tools, Diagnostic equipment, Hydrovac trucks, Water trucks, High-pressure pumps

  1 mois

  Truck Mechanic

  Emerald Park, SK

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a journeyman certificate in Truck and Transport or Heavy Equipment, a Class 5 licence with a clean abstract, and strong mechanical and troubleshooting skills. Experience with the SGI Motor Vehicle Inspection Program is an asset, and overtime must be possible.

  Hand tools, Storage toolbox

• 1 mois

  Senior Embedded Software Engineer

  Vancouver, BC

  Sur placeTemps plein

  CC

  Corinex Communications

  5+ ansCandidates need 5+ years of embedded software or embedded Linux experience, strong C programming, and hands-on board bring-up. Experience with U-Boot, Device Tree, kernel drivers, and JTAG or serial debugging is also required.

  JTAG, UART/serial console, GDB, OpenOCD, Yocto Project, BitBake

• 1 mois

  Electrician / Millwright (Dual Ticket 442A & 433A)

  Woodbridge, ON

  50,29 $/hTemps plein

  WC

  Westlake Canada Inc

  7+ ansCandidates need a valid 433A millwright and 442A electrical ticket, at least 7 years of experience (preferably in manufacturing), and the ability to read prints and use measuring tools. They must be able to work 12-hour continental shifts.

  Hand tools, Power tools, Precision measuring equipment, Calipers, MS Office

  1 mois

  Millwright

  Woodbridge, ON

  48,60 $/hTemps plein

  WC

  Westlake Canada Inc

  7+ ansCandidates need a valid industrial mechanic or millwright certificate and at least 7 years of experience, preferably in manufacturing. They must read prints and schematics, work safely at heights, and work continental shifts.

  Hand and power tools, Precision measuring equipment, Calipers, Scissor lift, Genie boom, MS Office

• 1 mois

  Truck/Trailer Mechanic

  Hamilton, ON

  46,09 $/hTemps plein

  CA

  CANADA AIR LIQUIDE CANADA INC.

  3+ ansCandidates need a valid 310T or 310J Truck/Trailer Technician licence and 3 to 5 years of experience. Strong knowledge of diesel engines, hydraulics, brakes and electrical systems is needed, along with the ability to lift heavy parts. Welding experience is an asset.

  Hand tools, Power tools, Industrial equipment

  1 mois

  Field Operator

  Sarnia, ON

  Temps plein

  CA

  CANADA AIR LIQUIDE CANADA INC.

  2+ ansCandidates need 2+ years operating nitrogen equipment, pumpers and bulkers, plus 2+ years in oil and gas, petrochemical or heavy industrial settings. A Class 1 driver licence with off-road experience and mechanical aptitude is mandatory.

  nitrogen pumping equipment, pumpers, bulkers, pressure test equipment

• 1 mois

  Senior Technical Sales Support

  Mississauga, ON

  Temps plein

  KP

  KSB Pumps Inc.

  7+ ansCandidates need more than 7 years of experience in rotating equipment, pumping systems, application engineering or technical sales support. A mechanical engineering degree or related field and strong SolidWorks and AutoCAD skills are required.

  Sales, Customer relations, Decision making, Prioritization, Process improvement, Problem solving

• 1 mois

  Service Millwright

  Fort McMurray, AB

  KG

  KSB GIW, Inc.

  5+ ansCandidates need five or more years of hands-on rotating equipment rebuild and repair experience, strong knowledge of GIW pumps, and the ability to read engineering drawings. A high school diploma is required, and a Red Seal Millwright certification is preferred.

  forklift, crane, respirator, Microsoft Word, Microsoft Excel

• 1 mois

  Webber - Road Maintenance Technician - Peel Halton - Infrastructure Management

  Etobicoke, ON

  24,50–26,75 $/hTemps plein

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  Candidates need a high school diploma or GED and a valid G driver's licence with a good driving record. Experience in infrastructure maintenance and repair is preferred, along with the ability to lift up to 50 pounds and work at heights.

  bucket truck, aerial platform lift, scaffolding, ladders, hand and power tools, snow removal equipment

  1 mois

  Webber - Road Technician - Infrastructure Management

  Carlsbad Springs, ON

  25–29 $/hTemps plein

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  1+ ansCandidates need a high school diploma or GED and a valid driver's licence with a good driving record. Experience in infrastructure maintenance and repair is preferred, and CDL, DOT/MTO, electrical or welding certifications are highly desirable.

  bucket truck, aerial platform lift, scaffolding, large trucks, pickup trucks, snow removal equipment

  1 mois

  Webber - Road Maintenance Technician - Burlington - Infrastructure Management

  Hamilton, ON

  25–27 $/hTemps plein

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  1+ ansWebber needs a high school diploma or GED and a valid G driver's licence with a good driving record. One year of infrastructure or maintenance experience is preferred, and CDL, DOT/MTO, electrical or welding certifications are highly desirable.

  bucket truck, aerial lift, scaffolding, snow removal equipment, sanding equipment, lawn mowing equipment

• 1 mois

  Maintenance Mechanic/Millwright

  Oshawa, ON

  Sur placeTemps plein

  EC

  EHC Canada Inc.

  5+ ansCandidates need a valid Ontario Industrial Mechanic (Millwright) 433A Certificate of Qualification, or the ability to obtain it within an agreed time frame, plus at least 5 years of industrial maintenance experience in manufacturing. EHC Canada also expects strong knowledge of mechanical, hydraulic, pneumatic and power transmission systems, blueprint reading and CMMS use.

  CMMS, Laser alignment equipment, Dial indicators, Vibration analysis equipment, Welding equipment, Hand and power tools

• 1 mois

  E-Coat Co-op

  East Gwillimbury, ON

  Temps plein

  

  Multimatic Dynamic Suspensions

  Candidates need current enrolment in a post-secondary co-op program in a related field. Knowledge of e-coat materials and process equipment, strong communication skills and the ability to recommend process improvements are required; SPC, Gage R&R and calibration knowledge is an asset.

  Chemical metering pumps, Filter presses, Coalescing filters, Hot water generating unit

• 1 mois

  Engineering Technician

  Lively, ON

  40,36–49,63 $/hSur placeTemps plein

  CM

  CAN MOT|20900 Motion Canada Inc.

  3+ ansCandidates need two years of post-secondary training in mechanical engineering or engineering technology, three to five years of related experience, and hands-on work with hydraulic design, simulation, and electro-hydraulic diagnostics. A bachelor degree and hydraulics training are preferred.

  CAD software, hydraulic simulation software

• 1 mois

  Press Assistant I

  Mississauga, ON

  25,66 $/hSur placeTemps plein

  TP

  TOPPAN Packaging Canada Corporation

  Candidates need mechanical aptitude, attention to detail and the ability to follow written procedures safely. Prior manufacturing, printing or machine operation experience is preferred, along with a dependable attendance record.

  printing press, pumps, hoses, filters, rewind equipment, cylinders

• 1 mois

  Labourer

  Canada

  Temps plein

  PL

  Petro-Line Ltd.

  Candidates need the listed safety and driving certifications, the ability to do repetitive heavy physical labour, and willingness to travel and work in any weather. Experience with pipeline coatings such as Denso, Polyguard or Stopaq is an asset.

  Sandblasting equipment, Water pumps, Ladders, Snow fence

• 1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  CoolIT needs candidates with a diploma or degree in electrical, electronics, mechanical or a related field, plus hands-on experience with instrumentation and bench test tools. Strong data analysis, root cause analysis and programming skills in Python or C/C++ are also required.

  Oscilloscope, Power analyzer, Logic analyzer, Multimeter, DAQ, SolidWorks

• 1 mois

  Heavy Equipment Shop Technician (Pump & Generator)

  Brampton, ON

  28–34 $/hSur placeTemps plein

  

  Cooper Equipment Rentals Limited: Cooper Equipment Rentals is Canada’s leading provider of compact, heavy and aerial rental equipment.

  3+ ansCandidates need at least 3 years of mechanical experience, preferably with pumps or generators, and a Journeyperson Heavy Equipment Technician licence or equivalent. A valid Class G/5 licence, strong 12V DC and AC electrical knowledge and diesel engine knowledge are also required.

  diagnostic tools, computer applications, complete set of tools

  1 mois

  Heavy Equipment Shop Technician

  Timmins, ON

  38–42 $/hSur placeTemps plein

  

  Cooper Equipment Rentals Limited: Cooper Equipment Rentals is Canada’s leading provider of compact, heavy and aerial rental equipment.

  3+ ansCandidates need at least 3 years of mechanical experience on construction equipment, a valid Class G licence with a clean driver's abstract, and a complete set of tools. Strong knowledge of diesel engines and hydraulics, computer diagnostic skills, and the ability to work independently are also required.

  diagnostic tools, computer applications, forklift, telehandler, boom lift, scissor lift

15 entreprises