Emplois “laboratory tools and components” au Canada – Page 4

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 15j

  Lead Engineer - Laser Systems

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  10+ ansCandidates need 10+ years in high-performance photonics, including semiconductor lasers, optical amplifiers and EO modulators. They also need experience with laser stabilization, noise control (RIN and phase noise), vendor management and new product introduction.

  laser stabilization electronics, photonic integrated circuit test systems

  15j

  Photonics Lab Technician - Measurement (Afternoon Shift)

  Toronto, ON

  Sur placeTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansXanadu needs a candidate with a BSc or equivalent in engineering, science or a related field, and 2+ years in a lab with optical test or fibre equipment. Fibre cleaving and splicing, high-precision optical measurement, and attention to detail are essential.

  Optical test equipment, Python

  15j

  Principal Analog ASIC Design Engineer

  Télétravail au Canada

  TélétravailTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  10+ ansCandidates need 10+ years of analog or mixed-signal IC design experience, including leading complex tape-outs to silicon. They also need deep analog circuit design skills, multi-node process experience, and Cadence EDA mastery.

  Cadence

• 15j

  Hardware & Embedded Systems Engineer - AI-Edge Devices

  Markham, ON

  Sur placeContrat

  

  Huawei Technologies Canada Co., Ltd.

  4+ ansCandidates need a master's degree or higher in electrical or computer engineering, plus 4+ years of hands-on hardware prototyping experience. Strong embedded ARM/RTOS, board-level debugging and technical writing skills are required, and frequent travel to China is expected.

  STM32, ESP32, Nordic nRF, Arduino, SolidWorks, Fusion 360

• 15j

  Section Manager, Software Design Engineering

  Toronto, ON

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  7+ ans3+ gestionCandidates need a bachelor's degree or higher in an electrical, computer, or related engineering discipline, and 7 to 10+ years of software design experience in nuclear or other safety-critical industries. Candidates also need 3+ years of leadership experience and working knowledge of nuclear software and quality standards.

  PLC, DCS, HMI, FMEA tools

• 16j

  TCMS Test technician

  Saint-Bruno, QC

  ?

  3+ ansTo thrive in this versatile role and meet our technological challenges, the following qualifications will be essential:; Education: College diploma (DEC) in industrial electronics technology, electrotechnics, computer…

  Laboratory equipment, Documentation, Technical drawings, Troubleshooting, Process improvement, Computer science

• 16j

  Sr. UX Designer

  Télétravail au Canada

  Télétravail

  

  NovoEd, Inc.: Since the company’s founding at Stanford’s social algorithm laboratory in 2012, global corporations, executive education providers, and training…

  7+ ansCandidates need 7+ years designing products used at scale, expert Figma skills, and strong user-centered and visual design abilities. Knowledge of WCAG 2.1 accessibility, responsive design and basic HTML/CSS is also expected.

  Figma

• 16j

  Lab Technician I (Contract)

  Winnipeg, MB

  18,20 $/hSur placeTemps plein

  HG

  Hoya Global

  Candidates need a high school diploma or GED, attention to detail and finger dexterity, and good English. Optical or machinery experience is preferred but not required.

  drill, lab management system

• 19j

  Electrical Designer

  Winnipeg, MB

  PI

  Price Industries Limited: After more than 60 years, Price remains a privately held family company with a deep heritage and commitment to innovation and service.

  3+ ansCandidates need an electrical engineering degree or diploma, at least 3 years of designing electrical systems for manufactured products or HVAC equipment, and strong troubleshooting and collaboration skills. Experience with controls, power distribution and design release processes is also needed.

  SolidWorks Electrical, CAD, PLC, BACnet, Modbus

• 19j

  Quality Electrical Engineer

  Calgary, AB

  

  SKF

  3+ ansCandidates need a bachelor's degree in an engineering discipline and 3+ years of relevant experience, plus legal eligibility to work in Canada. They should read electrical schematics, use test equipment, and apply problem-solving methods like 8D and 5-Why.

  Multimeter, Oscilloscope, Hi-pot tester, LCR meter

• 19j

  Materials Testing Lead Technician

  Lunenburg, NS

  

  Stelia Aerospace North America Inc: specializes in the design, development and fabrication of advanced composites structures for the aeronautic, defense and space markets.

  3+ ansCandidates need a college technologist diploma or university degree, or equivalent experience, plus about 3 years in a quality environment, ideally aerospace. Knowledge of lab practices and standards such as ASTM, ISO and MIL-STD, and strong computer and M365 skills, are also needed.

  Lab testing equipment

• 20j

  Quality & Food Safety Manager - Royal Canin

  Guelph, ON

  Temps plein

  

  Mars

  5+ ans3+ gestionCandidates need a bachelor's degree in engineering, food science or business, at least 5 years in a technical quality or food area, and 3 years leading teams. Food manufacturing and pet food experience and strong knowledge of food safety standards are highly preferred.

  Food safety, Regulatory compliance, Food science, Quality assurance procedures, Process engineering, Food engineering

• 20j

  Quality & Food Safety Manager - Royal Canin

  Guelph, ON

  Sur placeTemps plein

  RC

  Royal Canin Canada Co.

  5+ ans3+ gestionCandidates need a bachelor's degree in engineering, food science or business, at least 5 years in a technical or quality role and 3 years leading people. Quality and food safety management experience in food or pet food manufacturing is strongly preferred.

  Food safety, Regulatory compliance, Food science, Quality assurance procedures, Process engineering, Food engineering

  20j

  Quality & Food Safety Manager - Royal Canin

  Guelph, ON

  Sur placeTemps plein

  RC

  Royal Canin Canada Co.

  5+ ans3+ gestionCandidates need a bachelor's degree in engineering, food science or business, at least 5 years in a technical or quality role and 3 years leading people. Quality and food safety management experience in food or pet food manufacturing is strongly preferred.

  Food safety, Regulatory compliance, Food science, Quality assurance procedures, Process engineering, Food engineering

• 21j

  Met Lab Technician

  Stratford, ON

  50k–60k $/anTemps plein

  P

  PM-Stratford

  5+ ansJohnson Electric needs at least five years of lab testing, powder metallurgy, heat treatment or related manufacturing experience, with a metallurgy or materials education preferred. Candidates need strong analytical, documentation, communication and Microsoft Office skills, and must be able to stand and walk for long periods in a manufacturing environment.

  Microsoft Word, Microsoft Excel, Microsoft Access

• 21j

  Test Engineer - Laser Device Characterization & Automation

  Ottawa, ON

  Sur placeTemps plein

  R

  Ranovus

  3+ ansRanovus needs candidates with a bachelor's degree in an engineering or science field and 3+ years of semiconductor, photonics or laser testing experience. Strong Python skills and hands-on experience with lab instruments such as SMUs, OSAs and oscilloscopes are required.

  Source measure units (SMU), Optical spectrum analyzer (OSA), Power meter, Oscilloscope, Temperature controller, Environmental test chamber

• 21j

  Lab Technician / Machinist

  Burlington, ON

  30–32 $/hSur placeTemps plein

  

  SGS

  2+ ansCandidates need a high school diploma and machine shop or fabrication experience, ideally 2+ years. Materials testing lab experience and hydrotesting experience are also preferred.

  band saw, mill, grinder, polishing equipment, spectrometer, tensile testing machine

• 21j

  Instructor, Heavy Duty Mechanical

  Campbell River, BC

  70k–113k $/an

  

  North Island College

  5+ ansCandidates need a Red Seal Heavy Duty Mechanic qualification, a Certificate of Apprenticeship, and at least 5 years working as a journeyperson. They also need post-secondary teaching experience, including online and blended learning, and a Provincial Instructors Diploma.

  computer applications

• 21j

  Software Requirements & Release Engineer

  Medicine Hat, AB

  

  QinetiQ: QinetiQ is an integrated global defence and security company focused on mission-led innovation.

  7+ ansCandidates need a bachelor's degree in software or computer engineering, APEGA registration or eligibility, and 7+ years in requirements engineering, embedded software or validation. They must be legally authorized to work in Canada and eligible for a Government of Canada security clearance.

  Git, GitLab, Jenkins, Codebeamer, Polarion, DOORS

• 21j

  Engineering Technician

  Ottawa, ON

  Temps plein

  VS

  Viavi Solutions Canada ULC

  Candidates need an Electrical Technologist diploma or equivalent, basic knowledge of electrical schematics, soldering and fiber optics, and experience with hand tools and computer software. Strong attention to detail and good communication skills are also needed.

  Oscilloscope, Spectrum analyzer, Multimeter, Signal generator, Automated test equipment (ATE)

• 22j

  Lead Optics Engineer

  Cambridge, ON +1

  130k–180k $/anSur placeTemps plein

  

  Aerospace: Aerospace’s national workforce of more than 4,600 employees provides objective technical expertise and thought leadership to solve the hardest…

  8+ ansCandidates need a bachelor's degree in science or engineering, 8+ years in optical design, test and systems engineering for aerospace, and 3+ years of optical simulation with tools like Zemax or Code-V. Eligibility for Controlled Goods Program and Contract Security Program clearances is required.

  Zemax, Code-V, Matlab, interferometer, integrating sphere, spectrometer

• 22j

  Lab Technician

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  5+ ansCandidates need at least 5 years of experience in prototyping, plumbing, hydronics, HVAC/refrigeration or machining, plus hands-on problem solving, attention to detail and a team attitude. Experience in lab, R&D or light assembly settings and reach truck or sit-down forklift certification are preferred.

  Chillers, Cooling towers, Thermal chambers, Forklift, Reach truck

• 23j

  Lab Technician

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  5+ ansCandidates need at least 5 years of related experience in prototyping, plumbing, hydronics, HVAC/refrigeration or machining. They must be handy, solve unusual problems, work with attention to detail, and be self-motivated in a fast-paced team.

  forklift, reach truck, chillers, cooling towers, thermal chambers

• 23j

  Junior Technician - Hardware & Prototyping

  Montréal, QC

  Temps plein

  NI

  Noze Inc.

  1+ ansCandidates need a diploma (DEC) in electronics, mechanical or electromechanical technology, one to three years of hands-on prototyping lab experience, and skill with soldering, troubleshooting, 3D printers and electronic test instruments.

  oscilloscope, multimeter, logic analyzer, 3D printer, soldering iron, benchtop tools

21 entreprises