Emplois “Install machinery” au Canada – Page 40

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Contremaître, réfection de béton

  Montréal, QC

  Temps plein

  

  St-Denis Thompson: L’entreprise est un spécialiste réputé des travaux en hauteur et des interventions délicates en environnements complexes.

  3+ ansCartes de compétence CCQ valides (obligatoire); Carte ASP valide (obligatoire); 3 à 5 ans d'expérience pertinente

  machinerie de chantier, plans et devis, arpentage

• 1 mois

  HVAC Technician

  Halifax, NS

  22–40 $/h

  RR

  Rockstar Recruiting

  2+ ansCandidates need at least 2 years of HVAC or refrigeration experience and a valid driver's licence. A journeyman refrigeration licence is preferred, apprentices are welcome, and safety certifications such as First Aid, Fall Arrest and WHMIS are an asset.

  Heat pump equipment

  1 mois

  Heavy Equipment Mechanic

  Ancaster, ON

  RR

  Rockstar Recruiting

  Candidates need experience as a heavy equipment mechanic, with strong skills in electrical, hydraulic and mechanical repair. Apprentices at level 3 are welcome to apply.

  air compressor, drill rig, excavator, loader, grouting equipment

• 1 mois

  Mécanicien(ne) d'engins de chantier

  Malartic, QC

  34,24–49,86 $/h

  LM

  LJL Mécanique

  5+ ansDEP en mécanique d'engins de chantier ou 5 ans d'expérience; Expérience en hydraulique, électricité et soudage; Capacité de lire des plans mécaniques

  Caterpillar 793F

  1 mois

  Mécanicien(ne) d'équipements mobiles

  Val-d'Or, QC

  35,91–45,84 $/h

  LM

  LJL Mécanique

  3+ ansDEP en mécanique d'engins de chantier ou mécanique de machinerie mobile minière, ou 3 ans d'expérience; Connaissances en hydraulique, électricité et soudage; Permis de conduire classe 5 valide

  équipements mobiles miniers, plans mécaniques, outils de soudure

  1 mois

  Heavy-Duty Mechanic

  Greater Sudbury, ON

  40–55 $/h

  LM

  LJL Mécanique

  5+ ansCandidates need a heavy-duty mechanic diploma, at least 5 years of experience on mobile equipment in a mining or industrial setting, and strong troubleshooting skills. A Red Seal certification and mining experience are assets, and comfort working a rotating remote schedule is expected.

  Inspection, Welding, Preventive maintenance, Red Seal, Heavy duty technician, Troubleshooting

  1 mois

  Mécanicien(ne) industrielle - Secteur minier

  Sainte-Germaine-Boulé, QC

  Temps plein

  LM

  LJL Mécanique

  DEP en mécanique industrielle ou DEC en maintenance industrielle, ou équivalent; Expérience en entretien d'équipements industriels; Connaissances en hydraulique et pneumatique

  soudage, plans et schémas mécaniques

  1 mois

  Truck and Coach Mechanic - FIFO

  Nunavut

  41,86–50,50 $/hTemps plein

  LM

  LJL Mécanique

  5+ ansCandidates need Red Seal or 310T truck and coach technician certification, or a heavy-duty mechanics diploma, plus at least 5 years of OEM experience and prior mining or forestry work. They must be able to read mechanical, hydraulic and electrical drawings and work the 14/14 FIFO rotation.

  Red Seal, Heavy duty technician, Inspection, Preventive maintenance, Technical drawings, Circuit diagrams

• 1 mois

  Opérateur d'extrudeuse // Extruder Operator

  Saint-Laurent, QC

  Temps plein

  HG

  Hagen Group/ Groupe Hagen

  Diplôme d'études secondaires ou équivalent; formation technique en opération de machines un atout; Expérience en opération de machines en milieu de fabrication; Forte aptitude mécanique et capacité de dépannage

  extrudeuse, trémie, chariot élévateur, écrans de contrôle

• 1 mois

  Territory Manager

  Alberta

  80k $/an

  JW

  J.W. Winco, Inc.

  3+ ansCandidates need strong mechanical aptitude, the ability to manage a large sales territory, and clear communication skills. They must hold a valid driver's licence, live within the territory, and travel frequently, including overnight. Fluent English and three or more years of technical sales experience are preferred.

  Microsoft Office, ERP system, CRM system

• 1 mois

  Millwright - Huntsville, ON

  Huntsville, ON

  40,14 $/hTemps plein

  DN

  Daiken North America LTD

  Candidates need a Licensed Industrial Millwright/Mechanic 433A certification, strong troubleshooting and technical skills, and good English communication. Physical ability for lifting, bending and reaching, and willingness to work overtime, nights and weekends are required.

  Millwright, Maintenance and repair, Troubleshooting, Communication skills, Computer skills

• 1 mois

  Industrial Red Seal Electrician

  Delta, BC

  48 $/h

  

  CRH

  Candidates need Red Seal electrical trade qualifications, knowledge of electrical safety, and the ability to read electrical schematics and blueprints. Working knowledge of three-phase motors, programmable controls and circuits is also needed, along with the ability to lift up to 50 lbs.

  hoist, crane, hand tools, power tools

  1 mois

  ELECTROMECHANIC-Techniseal, Candiac QC

  Candiac, QC

  

  CRH

  5+ ansCandidates need a vocational electromechanics diploma (DEP), 5+ years in a similar role and practical welding experience. Knowledge of hydraulics, pneumatics, electricity and automation is required, and English reading ability is an asset.

  forklift, welding equipment, HVAC systems, compressors, pumps

  1 mois

  Red Seal Millwright

  Winnipeg, MB

  

  CRH

  3+ ansCandidates need a high school diploma or equivalent, at least 3 years of experience as a millwright with an interprovincial Red Seal, and the ability to lift up to 60 pounds.

  Hand tools, Power tools, Hoists, Cranes, Welding equipment

  1 mois

  ÉLECTROMÉCANICIEN -Techniseal, Candiac QC

  Candiac, QC

  

  CRH

  5+ ansDEP en électromécanique; 5 ans d'expérience et plus; Connaissance pratique en soudure

  Inspection, Hydraulics, Pneumatics, Electricity, Preventive maintenance, Documentation

• 1 mois

  Mechanical Engineering Technician

  Canada

  37,50–40,27 $/h

  LI

  Lavorare in AB | Gruppo AB

  2+ ansCandidates need at least two years of experience in mechanical machinery installation, testing, repair and maintenance, plus two years in the petroleum, coal or gas products industry. An electro-mechanical background, working English, a valid driver's licence and a passport without restrictions are required.

  blueprints, drawings, machinery, equipment

• 1 mois

  Maintenance Electrician

  Gravenhurst, ON

  35–38 $/hTemps plein

  

  Orbia: Orbia is a company driven by a shared purpose: to advance life around the world.

  Candidates need a Journeyman Electrician Certification, a valid Class G driver's licence, and knowledge of electrical schematics and the Electrical Code. Industrial production or mechanical maintenance experience is an asset, along with working knowledge of OHS, lockout/tagout and arc flash safety.

  multimeter, clamp meter, insulation resistance tester, PLC, VFD, Microsoft Excel

• 1 mois

  Wastewater Technician - UniFirst Canada (Afternoon/Night Shift)

  Quebec

  Temps plein

  

  UniFirst Corporation: Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries.

  1+ ansDES ou équivalent requis; Minimum de six mois d'expérience en réparation d'équipements industriels; Réussite du test de connaissances en maintenance de UniFirst

  GMAO, outils manuels, outils électriques, appareils d'essai électriques, équipement de soudage

  1 mois

  Maintenance Technician I - UniFirst Canada

  Quebec

  Temps plein

  

  UniFirst Corporation: Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries.

  1+ ansDES ou équivalent requis, diplôme technique un atout; Minimum de six mois d'expérience en réparation d'équipements industriels; Certification de Mécanicien(ne) de machines fixes 5e classe ou équivalent

  Hand and power tools, Precision measuring instruments, Electronic testing devices, CMMS (GMAO), Microsoft Office

  1 mois

  Maintenance Technician I - UniFirst Canada

  Calgary, AB

  Temps plein

  

  UniFirst Corporation: Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries.

  1+ ansCandidates need at least 6 months of industrial equipment repair experience, a 5th Class Power Engineer certificate, and Lockout/Tagout experience. They must read blueprints, pass UniFirst's maintenance assessment, lift 80 lbs, and work overtime when needed.

  hand tools, power tools, hoists, precision measurement tools, electronic testing devices, Computerized Maintenance Management System

  1 mois

  Maintenance Technician I - UniFirst Canada

  Taber, AB

  Temps plein

  

  UniFirst Corporation: Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries.

  1+ ansCandidates need at least 6 months of industrial equipment repair experience, a 5th Class Power Engineer certificate, and Lockout/Tagout experience. They must read blueprints, pass UniFirst's maintenance assessment, lift 80 lbs, and work overtime when needed.

  hand tools, power tools, hoists, precision measurement tools, electronic testing devices, Computerized Maintenance Management System

• 1 mois

  Facility Operations Worker (snow clearing), Whistler Sliding Centre

  Whistler, BC

  25–28,50 $/hTemporaire

  

  Whistler Sport Legacies

  1+ ansWhistler Sport Legacies needs candidates with one to three years of machine operation and maintenance experience and safe heavy-equipment driving skills. Snow removal in a mountain setting is preferred, and a BC Class 5 licence may be required. Candidates must be able to work outdoors in winter conditions and lift up to 50 lbs.

  snow plow, plow truck, heavy equipment, all-terrain vehicle, snow blower, drills

• 1 mois

  Journalier(ère) opérateur(rice)

  Canada

  26,41 $/hTemporaire

  VD

  Ville de Saint-Sauveur

  1+ ansDiplôme d'études secondaires ou attestation d'équivalence; Minimum de douze mois d'expérience pertinente; Permis de conduire de classe 3 valide

  Remove snow, Valid driver's licence

• 1 mois

  Operator CNC ULTCAD

  Leduc, AB

  UL

  Ulterra, LP

  2+ ansCandidates need at least 2 years of CNC mill and lathe setup and operation experience and a high school diploma or GED. They must read technical drawings, use measuring tools, have basic math and computer skills, and pass a forklift test.

  CNC mill, CNC lathe, calipers, micrometers, gauges, forklift

13 entreprises