Aucun filtre correspondant. Essayez un autre nom.
The United Counties of Leeds and Grenville
3+ ansCandidates need a Grade 12 diploma or equivalent, a valid D-Z driver's licence and at least three years of progressive experience operating heavy trucks and related equipment. They must be physically able to perform heavy labour and have good mechanical aptitude.
Dump truck, Snow plow, Sander, Backhoe, Tractor and mower, Chipper
BGIS
2+ ansCandidates need a Nova Scotia Certificate of Qualification as a registered Electrical Apprentice, at least 2 years of trade experience, and knowledge of the Nova Scotia Electrical Safety Code and the Occupational Health and Safety Act. Building automation, fire alarm and Class 1 Division 1 experience are also required.
Journeyperson, Maintain equipment, Electricity, Troubleshoot, Health and safety, Building automation
BGIS
2+ ansCandidates need a Certificate of Qualification as a registered Electrical Apprentice in Nova Scotia, at least 2 years of trade experience, and knowledge of the Nova Scotia Electrical Safety Code and occupational health and safety law. Fire alarm, building automation and Class 1 Division 1 experience are also required, along with a valid driver's licence.
Journeyperson, Maintain equipment, Electricity, Troubleshoot, Health and safety, Building automation
BGIS
1+ ansCandidates need a university degree or 1-3 years of relevant experience, strong English and French communication, and solid Microsoft Office skills. They must be service-oriented, organized, able to work independently and in a team, and comfortable lifting up to 50 lbs.
MS Office, Yammer, access card system, keypad system, furniture inventory software, laptop
BGIS
1+ ansCandidates need a university degree or 1-3 years of relevant experience, strong English and French communication, and solid MS Office skills. They must be service-oriented, organized, detail-focused and comfortable moving through large multi-floor areas and lifting up to 50 lbs.
MS Office, Yammer, Access card system, Employee keypad system, Furniture inventory software
PHS Canada
5+ ansCandidates need a diploma or degree in mechanics, electrical or mechanical engineering, or industrial automation, or equivalent experience. They need at least 5 years of automation or building controls experience with site supervision, and full professional French.
BACnet, Modbus, Allen-Bradley, Studio 5000, Emerson DeltaV, Tridium Niagara 4
Savaria Corporation
5+ ansCandidates need a post-secondary diploma or degree in accounting or business, enrollment in or completion of the CPA program, and at least 5 years in manufacturing or construction finance. Strong Excel, Syteline and QuickBooks skills and good written and verbal communication are required.
Syteline, QuickBooks, Microsoft Excel, Microsoft Office, Power Query, ERP systems
Tridon Communications
3+ ansCandidates need hands-on cabling or telecommunications experience, with levels ranging from none required for Junior up to 3-5 years for Senior and extensive experience for Lead. Good safety habits, attention to detail, a valid driver's licence and the ability to pass client site-access checks are expected.
OTDR, optical power meter, EXFO FastReporter, IOLM, hand tools, power tools
Tridon Communications
2+ ansCandidates need 2 to 10 years of hands-on outside plant fiber experience, including fusion splicing and testing with EXFO equipment. Industrial or oil sands experience, a valid driver's licence, and the ability to read telecom drawings are also required.
Fusion splicer, EXFO OTDR, EXFO power meter, EXFO IOLM, EXFO FastReporter
CIMA+
12+ ans2+ gestionCandidates need a Bachelor's degree in engineering or computer science, an Ontario P.Eng licence, and 12+ years of experience, including technical lead work. Strong knowledge of networking, telecom technologies and OT/IT convergence is required.
SCADA, PLC, SEL RTAC
CIMA+
5+ ans2+ gestionCandidates need a bachelor's degree in Engineering or Computer Science, an Ontario P.Eng or equivalent, and 5 to 10 years of experience, ideally including 2 in a technical lead role. Strong knowledge of networking, telecom technologies and cybersecurity standards such as NERC CIP, NIST and ISA/IEC 62443 is required.
Cisco, SCADA, PLC, SEL RTAC
CIMA+
7+ ansCandidates need over 7 years of electrical layout experience in the energy sector, including single line diagrams and low and medium voltage layouts. A post-secondary electrical technology diploma (power distribution preferred), CAD skills, and a valid provincial driver's licence are also required.
AutoCAD, MicroStation
CIMA+
7+ ansCandidates need over 7 years of electrical layout experience in the energy sector, including single line diagrams and low and medium voltage layouts. A post-secondary electrical technology diploma (power distribution preferred), CAD skills, and a valid provincial driver's licence are also required.
AutoCAD, MicroStation
CIMA+
6+ ansCandidates need 6+ years of electrical layout experience, ideally with Canadian utilities, and a bachelor's degree in electrical engineering. They also need EGBC registration or the ability to register, knowledge of the Canadian Electrical Code and IEEE standards, and a valid Canadian driver's licence.
Design drawings, Maintain electronic equipment, Prepare technical reports, Procurement, Quality assurance procedures, Electrical engineering
CIMA+
7+ ansCandidates need a CAD or drafting diploma or equivalent, at least 7 years of relevant drafting experience, and advanced AutoCAD skills in 2D and 3D. Strong attention to detail, communication and independent problem-solving are required.
AutoCAD, Substation Design Suite, AutoCAD Electrical, MicroStation, Revit, Civil 3D
CIMA+
2+ ansCandidates need a CAD or drafting diploma or equivalent, at least 2 years of drafting experience, and proficiency in AutoCAD with 2D and 3D skills. Strong attention to detail and the ability to read engineering markups are also required.
AutoCAD, Substation Design Suite, AutoCAD Electrical, MicroStation, Revit, Civil 3D
CIMA+
12+ ansCIMA+ needs a Canadian-registered or registration-eligible Professional Engineer with an electrical engineering degree, at least 12 years of power systems design experience and 8 years of detailed P&C and SCADA design with Canadian utilities. Candidates need deep knowledge of protection philosophies, SCADA networks and substation automation, and fluent English.
Microsoft Excel, Microsoft Word, Microsoft Outlook, power system modeling software, Intelligent Electronic Devices (IED)
CIMA+
12+ ansCIMA+ needs a Canadian-registered or registration-eligible Professional Engineer with an electrical engineering degree, at least 12 years of power systems design experience and 8 years of detailed P&C and SCADA design with Canadian utilities. Candidates need deep knowledge of protection philosophies, SCADA networks and substation automation, and fluent English.
Microsoft Excel, Microsoft Word, Microsoft Outlook, power system modeling software, Intelligent Electronic Devices (IED)
AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.
4+ ansCandidates need a college diploma in electrical engineering technology, at least 4 years of multi-disciplinary electrical design experience with AutoCAD and REVIT, and experience with pump stations or water treatment design. They also need a Reliability Level clearance (or ability to obtain one) and a valid Ontario G driver's licence.
AutoCAD, REVIT, Electrical CADD, Microsoft Project
AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.
6+ ansCandidates need a university degree in electrical engineering, 6+ years of multi-disciplinary electrical and power design experience, and Canadian Professional Engineer registration. Preferred experience includes high voltage design, electrical studies, and software such as SKM, ETAP, EasyPower and CDEGS.
SKM, ETAP, EasyPower, CDEGS
AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.
6+ ansCandidates need a diploma in electrical or power engineering technology and 6+ years of electrical construction, design and field verification experience. Knowledge of the Canadian Electrical Code, Alberta codes and ULC fire alarm standards is required, along with a valid Class 5 driver's licence.
AutoCAD, Revit, DIALux, Visual, MS Office 365
10 entreprises