Emplois “welding inspection equipment” au Canada – Page 40

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Heavy Duty Mechanic

  Squamish, BC

  47,80 $/h

  

  Amrize

  3+ ansCandidates need a B.C. Certificate of Qualification or Heavy Duty Mechanic ticket, 3-5 years of related experience, and a Class 1 or Class 3 with air licence. Welding, fabrication, knowledge of hours-of-service rules and fluent English are also required.

  Forklift, Microsoft Excel, Microsoft Word, Microsoft Outlook

  1 mois

  Maintenance Millwright (Afternoon Shift)

  Coldwater, ON

  

  Amrize

  Candidates need an Industrial Mechanic Millwright certification from the college of trades or an interprovincial Red Seal. They must follow safety protocols and wear respirators, which requires being clean shaven where the seal meets the face.

  Cranes, Jacks, Tractors, Drills, Grinders, Welding equipment

  1 mois

  Millwright

  Winnipeg, MB

  

  Amrize

  1+ ansCandidates need a high school diploma, one year of industrial millwright experience and an Interprovincial Red Seal Millwright (Industrial Mechanic) credential. Fluent English, basic computer skills and a willingness to train further are also required.

  Email

  1 mois

  Mill Helper

  Woodstock, ON

  27–28 $/h

  

  Amrize

  Candidates need a secondary school diploma or equivalent. Industrial or mining plant experience, heavy equipment operation, and basic welding and fitting are preferred but not required.

  skid steer, hand-held tools, fixed and mobile plant equipment, respirators

  1 mois

  Industrial Millwright

  Brookfield, NS

  

  Amrize

  3+ ansCandidates need an Industrial Mechanic (Millwright) ticket or apprenticeship, at least three years of heavy industrial mechanical maintenance experience, and a valid Nova Scotia or Interprovincial ticket. Skills in bearing installation, shaft alignment, hydraulics, pneumatics and computerized maintenance systems are required.

  SAP, hand tools, power tools, torque tools, precision measuring instruments

• 1 mois

  Industrial Millwright/Operator

  Ottawa, ON

  82k–96k $/anTemps plein, Temporaire

  

  CityofOttawa

  5+ ansCandidates need an Ontario Industrial Mechanic Millwright 433A certificate, an 8000-hour apprenticeship, and at least 5 years of experience as a licensed industrial millwright. Water or wastewater operator certification, a G driver's licence and English proficiency are also required.

  SCADA, Maintenance Management System, forklift, mobile crane, welding equipment, precision measurement tools

• 1 mois

  Millwright

  Mississauga, ON

  47,94 $/hTemporaire

  

  PepsiCo

  Candidates need an Industrial Millwright Red Seal ticket, a passed technical assessment, and hands-on experience with mechanical systems, electronics, machine shop tools and machine troubleshooting. PLC experience is a plus.

  PLC, VFD, lathe, grinder, welding equipment, hydraulic systems

  1 mois

  PepsiCo Beverages Maintenance Millwright (Winnipeg)

  Winnipeg, MB

  38,37–46,26 $/hTemporaire

  

  PepsiCo

  Candidates need a Red Seal Industrial Mechanic (Millwright) certification and a valid Industrial Millwright Journeyperson ticket. A 4th Class Power Engineer certificate is preferred, along with strong troubleshooting skills and the ability to work shifts and overtime.

  PLC, Lathe, Grinder, Welding equipment

• 1 mois

  CNC Machinist – Horizontal Boring and Precision Machining

  Penticton, BC

  40 $/hTemps plein

  

  Potentia Human Resources Inc.

  Candidates need demonstrated experience operating and programming large-format CNC horizontal boring mills, plus Mastercam and Heidenhain/Fanuc control experience. A machinist apprenticeship, Red Seal or mechanical engineering technology diploma is preferred, and the ability to read GD&T drawings and handle heavy loads safely is required.

  Mastercam, Heidenhain, Fanuc, Mazak Mazatrol, CNC horizontal boring mill, micrometers

• 1 mois

  Maintenance Technician

  Surrey, BC

  34,81 $/h

  

  cargill: Cargill is a family company committed to nourishing the world in a safe, responsible and sustainable way.

  2+ ansCandidates need a technical background or diploma in engineering, mechanical, electrical or maintenance, a good safety and attendance record, and the ability to do physically demanding work, including lifting 50 pounds and working in confined spaces.

  forklift, hydraulic equipment, pneumatic equipment, MRO system, MRP system

  1 mois

  Journeyman Millwright

  Surrey, BC

  50,28 $/h

  

  cargill: Cargill is a family company committed to nourishing the world in a safe, responsible and sustainable way.

  2+ ansCandidates need a Red Seal Millwright licence, a high school diploma or equivalent, and the ability to lift 50 pounds and do physical work in confined spaces, heat, cold and dust. Work in English and flexible shifts including nights, weekends and overtime are required.

  Forklift, Heavy equipment, Hydraulic equipment, Pneumatic equipment

• 1 mois

  Supervisor, Ground Support Equipment (GSE)

  Toronto, ON

  Temps plein

  

  Porter Airlines Inc.

  4+ ans1+ gestionPorter Airlines needs candidates with a Red Seal-level automotive mechanic certification (310-S or 310-T), four years of equipment maintenance experience and one year of supervision. Candidates also need strong electrical and mechanical skills, a valid driver's licence and the ability to obtain security clearance.

  CMMS, Diesel equipment, Welding equipment

• 1 mois

  Automated Welding Specialist

  Cambridge, ON

  

  BWXT

  5+ ansCandidates need a university degree or college diploma in engineering, welding, robotics, materials or mechatronics, plus at least 5 years of manufacturing or fabrication experience. Experience with robotic GTAW and GMAW programming is required.

  AutoCAD, SolidWorks, robotic welding systems, orbital welding equipment

• 1 mois

  Full Time Production Associate

  St. Thomas, ON

  23,35 $/hSur placeTemps plein

  

  Cornerstone Building Brands: Cornerstone Building Brands is a leading manufacturer of exterior building products serving the residential and low-rise non-residential markets…

  Candidates need general labour, construction or manufacturing experience (preferred), a strong work ethic, reliability and a safety-focused attitude. They must be 18 or older, eligible to work in Canada, able to stand for 9 hours, lift 30 to 50 lbs, and work rotating shifts, overtime and some Saturdays.

  power tools, hand tools, saws, pneumatic tools, welding machinery, tape measure

• 1 mois

  Industrial Mechanic Millwright

  Calgary, AB

  Temps plein

  

  Rona Inc.

  Candidates need proven safety compliance and industrial mechanic or millwright experience, or an electrician certificate with mechanical maintenance experience. Strong troubleshooting, blueprint reading and mechanical drive skills are required.

  Electric pallet truck, Electric lift truck, Front end loader, Welding equipment

• 1 mois

  Maintenance Technician (Fifth Class Power Engineer)

  Vancouver, BC

  Temps plein

  

  Alsco: Alsco Uniforms provides managed uniform and linen laundry services for healthcare, industrial & hospitality businesses.

  2+ ansCandidates need at least two years of maintenance engineering experience with machinery, electricity, hydraulics, pneumatics, welding and boilers. A valid driver's licence with a clean driving record is required, and a Fifth Class Power Engineer certificate, boiler licence or PLC programming may be needed at some locations.

  PLC, forklift, power tools, hand tools, boiler, welding equipment

• 1 mois

  Mobile Maintenance Planner

  Dubreuilville, ON

  Temps plein

  

  Alamos Gold Inc.: Additionally, the Company has a significant portfolio of exploration through advanced development stage projects, including the Lynn Lake Gold…

  Candidates need experience in mobile equipment maintenance planning or mechanical work in underground or open pit mining, and strong SAP PM skills. They must understand heavy mobile equipment, read technical drawings and manuals, and communicate well across departments.

  SAP PM, SAP MM, Modular, Wenco, Cat MineStar

• 1 mois

  Instrumentation Supervisor

  Burnaby, BC

  143k–168k $/anTemps plein

  

  Parkland Refining BC Ltd.

  5+ ansParkland Refining BC Ltd. needs candidates with at least five years of instrumentation maintenance experience in a refinery or heavy industry and supervisory experience in a unionized setting. Candidates need a Red Seal or engineering degree, strong knowledge of DCS systems and CEMS analyzers, and CMMS experience.

  DCS, CEMS analyzers, CMMS, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 1 mois

  Deep Foundations Welder

  Montréal, QC

  Sur placeTemps plein

  

  Pomerleau: It specializes in building, infrastructure, and civil engineering sectors, undertaking major projects through alternative delivery methods.

  Candidates need a valid CCQ competency card, CWB certification and ASP Construction Health and Safety card. They also need heavy construction or deep foundations welding experience, skill in several welding processes, and willingness to work variable schedules and travel.

  welding equipment

• 1 mois

  Maintenance Technician

  Wallaceburg, ON

  34,50–36,59 $/hSur placeTemps plein

  

  Wabtec: Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services.

  5+ ansWabtec Foundry needs candidates with 5 or more years of maintenance experience in manufacturing or distribution, plus basic mechanical, electrical, hydraulic and pneumatic knowledge. Millwright, machine repair, welding or electrical certifications, PLC programming and foundry experience are assets.

  Shop tools, Microsoft Office, PLC, Hydraulic and pneumatic systems

• 1 mois

  Maintenance Technician (Farm Operations)

  Leamington, ON

  32,64 $/hTemps plein

  

  Highline Mushrooms

  10+ ansCandidates need many years of building and mechanical equipment maintenance experience, preferably ten to fifteen. Experience in pneumatic controls, welding, hydraulics or farm equipment is an asset, and candidates must be legally able to work in Canada without restrictions.

  welding equipment, hydraulic equipment, pneumatic controls, farm equipment, computer control systems

  1 mois

  Red Seal Millwright

  British Columbia

  46 $/hTemps plein

  

  Highline Mushrooms

  10+ ansCandidates need Red Seal Millwright certification, at least 10 years in an industrial setting, and welding experience including MIG and stick. Mushroom industry experience, PLC skills, HVAC experience, and the ability to work in Canada are also required or preferred.

  hand tools, power tools, machine tools, PLC, welding equipment

• 1 mois

  Mill Mechanic

  L'Orignal, ON

  44,35–46,58 $/hTemps plein

  

  Heico: The Heico Companies L.L.C has remained a privately held company since its creation and maintains a majority ownership in each of its operations,…

  5+ ansCandidates need an industrial millwright certification (preferred), about 5 years of millwright experience, and working knowledge of hydraulics, pneumatics, welding and CMMS. Bilingual English and French and in-depth Rod Mill knowledge are preferred, and a criminal background check is required.

  CMMS, welding equipment, burning equipment, precision measuring tools

• 1 mois

  Millwright

  Oshawa, ON

  45,45 $/hTemps plein

  AO

  AGS - Oshawa Division

  8+ ansCandidates need a Grade 12 education, a valid Ontario Certificate of Qualification or an 8,000-hour apprenticeship, or eight years of practical industrial millwright experience. Strong skills in reading drawings, precision measuring and safe lockout procedures are expected.

  hand and power tools, lathe, milling machine, overhead cranes, hoists, vibration analysis equipment

17 entreprises