Emplois “Mechanical and layout drawings” au Canada – Page 42

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Field Coordinator (M&E)

  London, ON

  Temps plein

  JE

  J EllisDon Corporation

  1+ ansCandidates need at least 1-2 years of construction engineering and layout experience. MEP coordination, commissioning support or closeout experience is an asset, along with strong verbal and written communication skills.

  Inspection, Communication skills, Represent the organisation

• 1 mois

  Senior Superintendent

  Edmonton, AB

  Temps plein

  EC

  EllisDon Construction Services Inc.

  10+ ansCandidates need 10+ years of ICI construction experience, strong scheduling skills for long and short term plans, and knowledge of the Building Code and prime contract requirements. Data center experience is an asset.

  Scheduling software, Project management software, Contract management software

• 1 mois

  Specialist Engineer – Feeder/Piping Design and Layout

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  15+ ansCandidates need a mechanical engineering degree, Professional Engineer registration in Ontario, and at least 15 years of feeder and piping design experience in heavy industry, ideally on CANDU projects. Strong knowledge of CSA N285, CSA B51, CSA N289, ASME codes and piping specifications is required.

  4D CADDS

  1 mois

  Senior Piping Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandu Energy needs a mechanical engineer with a P.Eng licence and at least 10 years of heavy-industry experience, ideally in nuclear piping, stress analysis and CANDU systems. Strong communication and technical writing skills are required.

  PipeStress, CAESAR II, AutoPipe, ANSYS Mechanical, MATLAB, MathCAD

  1 mois

  Senior Piping Supports Design Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need an engineering degree in mechanical or civil engineering, Professional Engineer registration or eligibility in Ontario, and at least 10 years of piping stress analysis experience in heavy industry. They must work independently on complex problems and be eligible for federal security clearance.

  PipeStress, Cesar II, AutoPipe, ANSYS, LS-DYNA, GT STRUDL

  1 mois

  Piping Supports Design Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a mechanical or civil engineering degree and a Professional Engineer licence or eligibility in Ontario, plus five to ten years of piping stress analysis in heavy industry. They must know ASME and CSA piping codes and stress analysis software such as CAESAR II or PipeStress.

  PipeStress, AutoPipe, MathCAD, GT STRUDL, ANSYS, LS-DYNA

  1 mois

  Piping Stress Analyst Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a mechanical engineering degree and P.Eng. registration or eligibility in Ontario, plus 5-10 years of heavy-industry mechanical engineering experience. Experience with pipe stress software, piping support design and ASME or CSA codes is required or preferred, and candidates must be eligible for security clearance.

  PipeStress, AutoPIPE, CAESAR II, MathCAD, ANSYS, LS-DYNA

  1 mois

  Senior Piping Stress Analyst Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need a mechanical engineering degree, Professional Engineer registration or eligibility in Ontario, and at least 10 years of heavy-industry mechanical engineering experience. Strong knowledge of piping stress codes, stress analysis software, and the ability to work independently and in multidisciplinary teams are required.

  PipeStress, AutoPipe, MathCAD, ANSYS, LS-DYNA, GT STRUDL

  1 mois

  Process System Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  7+ ansCandidates need an engineering degree in chemical, mechanical, nuclear or engineering science, a Professional Engineer registration in Ontario, and at least 7 years of process-system design or analysis experience. Strong technical writing and teamwork skills are also required.

  ANSYS, Mathcad, Flomaster, NUCIRC, CATHENA

• 1 mois

  Mechanical Equipment and Piping Designer/Drafter

  Vancouver, BC

  Temps plein

  

  AtkinsRéalis

  5+ ansCandidates need a diploma in mechanical engineering technology or drafting and at least 5 years of industrial mechanical experience. AtkinsRéalis asks for strong skills in Revit, AutoCAD, AutoPLANT and SolidWorks, plus knowledge of hydropower equipment.

  Revit, AutoCAD, AutoPLANT, SolidWorks, Navisworks, BIM 360

• 1 mois

  Electrician / Millwright (Dual Ticket 442A & 433A)

  Woodbridge, ON

  50,29 $/hTemps plein

  WC

  Westlake Canada Inc

  7+ ansCandidates need a valid 433A millwright and 442A electrical ticket, at least 7 years of experience (preferably in manufacturing), and the ability to read prints and use measuring tools. They must be able to work 12-hour continental shifts.

  Hand tools, Power tools, Precision measuring equipment, Calipers, MS Office

  1 mois

  Millwright

  Woodbridge, ON

  48,60 $/hTemps plein

  WC

  Westlake Canada Inc

  7+ ansCandidates need a valid industrial mechanic or millwright certificate and at least 7 years of experience, preferably in manufacturing. They must read prints and schematics, work safely at heights, and work continental shifts.

  Hand and power tools, Precision measuring equipment, Calipers, Scissor lift, Genie boom, MS Office

• 1 mois

  Project Engineer

  Montréal, QC

  Temps plein

  CA

  CANADA AIR LIQUIDE CANADA INC.

  5+ ans3+ gestionCandidates need an engineering degree, preferably mechanical or chemical, and several years of engineering and project management experience. Knowledge of mechanical, piping and process engineering, plus ASME, CSA, NFPA and CGA standards, is required.

  P&ID, Project Execution Handbook

• 1 mois

  Strategic Account Manager

  Fort McMurray, AB

  KG

  KSB GIW, Inc.

  5+ ansCandidates need an engineering degree or technical diploma, 5 years of industry experience and commercial experience on technical equipment is preferred. They should have a strong mechanical aptitude, a deep understanding of pumping systems, and good English communication skills.

  SAP, Microsoft Office, pumps, parts sheets, drawing layouts

  1 mois

  Service Millwright

  Fort McMurray, AB

  KG

  KSB GIW, Inc.

  5+ ansCandidates need five or more years of hands-on rotating equipment rebuild and repair experience, strong knowledge of GIW pumps, and the ability to read engineering drawings. A high school diploma is required, and a Red Seal Millwright certification is preferred.

  forklift, crane, respirator, Microsoft Word, Microsoft Excel

• 1 mois

  Senior Electrical Engineer

  Montréal, QC +1

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  15+ ansCandidates need an Electrical Engineering degree, OIQ Professional Engineer registration or eligibility, and 15 years of power generation or industrial experience. They must know CSA, IEEE and ANSI codes and communicate fluently in French, written and spoken.

  Electrical engineering, Maintain electronic equipment, Documentation, P.Eng.

  1 mois

  Senior Electrical Engineer

  Toronto, ON

  100k–138k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  8+ ansCandidates need 8 to 12+ years of progressive experience designing high-voltage transmission substations, including 500 kV projects. A Bachelor's in Electrical Engineering and a Canadian P.Eng. designation are required, along with knowledge of IEEE, ANSI, CSA, IEC and NERC standards.

  GIS, Leadership, Design package, Electrical engineering, Documentation, Regulatory compliance

  1 mois

  Electrical Engineering Supervisor

  Toronto, ON

  125k–172k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  15+ ansAtkinsRéalis needs a Professional Engineer (P.Eng.) with a bachelor's degree in electrical engineering and 15 to 20+ years of high-voltage substation design experience. Candidates need proven 500 kV-plus AIS and GIS project experience and strong technical leadership and communication skills.

  Electrical engineering, Leadership, Design package, GIS, Documentation, Regulatory compliance

• 1 mois

  Flexo and Rotary Operator

  Brampton, ON

  24 $/hTemps plein

  C2

  CAN_MPC_ 2000 Menasha Packaging Canada L.P.

  1+ ansCandidates need a high school diploma or equivalent and at least 6 months of experience in rotary die cutting or in a manufacturing environment running automatic or semi-automatic equipment, which is preferred. Good color perception, mechanical aptitude, basic math and the ability to lift up to 85 lbs are required.

  flexographic press, rotary die press, pallet jack, calipers, measuring tape

• 1 mois

  Structural Vibration Engineer

  Mississauga, ON

  90k–105k $/anTemps plein

  CT

  CAN Thornton Tomasetti Canada, Inc.

  5+ ansCandidates need a civil, structural or related engineering degree and about 5 to 10 years of structural dynamics or vibration experience. Strong skills in numerical modelling, field testing, technical writing and client communication are required, and P.Eng. registration is an asset.

  MATLAB, Python, finite element software, data acquisition systems

• 1 mois

  Electrical Installations Design Engineer –Rail Systems

  Toronto, ON

  95k–143k $/anHybrideTemps plein

  HR

  HITACHI RAIL STS CANADA, INC.

  3+ ansCandidates need a bachelor's degree in electrical engineering or a related technical field, 3 to 7 years of raceway design and installation experience, and proficiency in AutoCAD, Revit and BlueBeam ReVu. A P.Eng is preferred, and a clear criminal background check is required.

  AutoCAD, Revit, Autodesk ACC, BlueBeam ReVu

• 1 mois

  Ingénieur(e) de projet / Project Engineer

  Canada

  Temps plein

  IM

  IPEX Management Inc.

  3+ ans3 à 7 ans d'expérience en ingénierie manufacturière ou industrielle; Baccalauréat en génie mécanique; Membre de l'OIQ

  AutoCAD

• 1 mois

  Manufacturing Test Technician - Contract

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  3+ ansCoolIT Systems needs candidates with 3+ years in electromechanical systems, electrical testing or manufacturing, who can troubleshoot and read schematics. Certifications such as IPC, ASE or OSHA are a plus.

  test management software, automated test systems

  1 mois

  Automation Engineer - Controls & Automation

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  Candidates need a bachelor's degree in an engineering or automation field and hands-on experience with PLCs, HMIs, servo motion and industrial robots. They must have delivered automated machinery from design through commissioning, and be legally authorized to work in Canada without sponsorship.

  PLC, HMI, servo drives, industrial robots, collaborative robots, SCADA

13 entreprises