Intermediate / Senior Project Engineer - Hydro
Vancouver, BC +4Tetra Tech
7+ ansCandidates need a bachelor's engineering degree, a P.Eng. or eligibility to register, and about 7 years of progressive experience, ideally in hydropower, dams or water resources. They also need strong coordination, tendering and communication skills.
Procurement, Documentation, Change management, Health and safety, P.Eng., Quality assurance procedures
Civil Designer
Mississauga, ON +4Tetra Tech
3+ ansCandidates need a diploma in civil engineering technology, at least 3 years of design or drafting experience, and experience with civil design. The Certified Engineering Technologist designation is preferred, along with strong problem-solving and communication skills.
Health and safety, Civil engineering, C.E.T., Problem solving, Communication skills, Technical writing
Civil Technologist
Mississauga, ON +4Tetra Tech
3+ ansCandidates need a diploma in civil engineering technology and at least 3 years of design or drafting experience in consulting or energy. The Certified Engineering Technologist (CET) designation is preferred, along with strong attention to detail, problem-solving and communication skills.
Health and safety, Civil engineering, C.E.T., Problem solving, Communication skills, Technical writing
Junior Civil Technologist
Calgary, ABTetra Tech
Candidates need 0 to 1 years of relevant experience and a civil engineering technology diploma is preferred. They need a valid Class 5 licence, strong written and verbal communication, and the ability to work with minimal supervision.
Nuclear density gauge
Concepteur mécanique du bâtiment – Industrialisation
Montréal, QCTetra Tech
2+ ansDiplôme collégial en technique de mécanique du bâtiment; Deux à cinq ans d’expérience en conception; Maîtrise d’AutoCAD, Trane Trace, Carrier HAP ou autre logiciel de calcul de charge
AutoCAD, Trane Trace, Carrier HAP
Concepteur mécanique industrielle (mécanosoudée)
Montréal, QCTetra Tech
2+ ansDiplôme collégial en conception mécanique ou universitaire en génie mécanique; Minimum de deux années d’expérience en conception; Maîtrise d’AutoCAD et de logiciels 3D, Inventor obligatoire
Inventor, AutoCAD
Quality Specialist - Nuclear
Pickering, ONTetra Tech
2+ ansCandidates need 2 to 5 years of quality assurance, process improvement or regulatory compliance experience, nuclear or engineering consulting preferred. Strong analytical, written and verbal communication skills and Microsoft Office and SharePoint proficiency are required.
Microsoft Office, SharePoint
Waste Spot Checker
Saskatoon, SKTetra Tech
Tetra Tech needs candidates with interest in waste management, strong verbal communication, attention to detail and punctuality for early starts. They must be legally entitled to work in Canada, own CSA steel-toed boots, and be able to walk long distances and lift up to 10 kg outdoors.
tablet
Support technique à la maintenance
Montréal, QCTetra Tech
5+ ansDEC ou BAC en génie mécanique, électrique ou maintenance industrielle; 5 à 20 ans d’expérience en maintenance manufacturière; Expérience avec un logiciel de GMAO
GMAO, Excel, Access, Word, machines-outils à commande numérique
Gestionnaire de projet majeur - infrastructures manufacturières
Montréal, QCTetra Tech
5+ ansDiplôme en génie (mécanique, civil, construction) et/ou technique; Cinq à dix années d’expérience en gestion de projets d’envergure manufacturiers; Bilinguisme français et anglais, communication orale et écrite
Communication skills, Security regulations, Process improvement, Project management, Leadership, Bilingualism
Gestionnaire de Projet – acquisition d’équipements
Montréal, QCTetra Tech
5+ ansBaccalauréat en génie mécanique, aérospatial, production automatisée ou industriel, ou expérience pertinente; Minimum de cinq ans en gestion de projets; Maîtrise du français et de l'anglais
MS Project, Excel, PowerPoint
Waste Sorter
Vancouver, BCTetra Tech
Candidates need their own transportation, CSA Green Triangle steel-toed boots, and the ability to lift up to 20 kg and work in varied outdoor weather. Attention to detail, punctuality for 8:00 am starts and the legal right to work in Canada are required; a Class 5 licence and waste audit experience are assets.
Characteristics of waste, Collect samples, Health and safety, Data entry, Personal protective equipment, Attention to detail
Junior Civil/Structural Engineer
Pickering, ONTetra Tech
1+ ansCandidates need knowledge of civil and structural engineering, plus PEO registration or registration in progress. A degree is preferred and 1-3 years of experience is an asset. Tetra Tech also requires computer design skills and the ability to obtain a Level II Federal Security Clearance.
S-FRAME, PLS-CADD, CAD, spreadsheets
Intermediate Instrumentation and Controls Engineer
Pickering, ON +1Tetra Tech
5+ ansTetra Tech needs candidates with a preferred electrical, electronic, mechatronic or electromechanical engineering degree and P.Eng registration or eligibility. Experience with industrial instrumentation, PLCs, PID controllers and safety instrumented systems is needed, and the candidate must be able to obtain a security clearance.
PLC, schematic capture tools, BOM generation tools
Intermediate Electrical Engineer – Heavy Industrial/Nuclear
Mississauga, ON +1Tetra Tech
4+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. in Ontario or progress toward one, and 4-8 years of electrical engineering experience in heavy industry or power generation. Knowledge of the Canadian Electrical Code, CSA and IEEE standards, and power system studies is needed, with ETAP an asset.
ETAP
Junior Electrical Engineer
Pickering, ON +1Tetra Tech
1+ ansCandidates need a university degree in electrical engineering or a related discipline, with knowledge of electrical engineering principles. Experience in nuclear, power or consulting engineering, CAD and MS Office skills, and the ability to receive security clearance are needed.
CAD software, MS Office
Junior Civil Engineer
Calgary, AB +4Tetra Tech
1+ ansCandidates need a Bachelor's degree in civil engineering and 1 to 5 years of related experience, with electrical substation or transmission line work preferred. Knowledge of civil and structural design, computer-based design tools, and eligibility for Professional Engineer in Training registration are preferred.
STAAD.Pro, MathCAD, PLS-CADD
Senior Contaminated Sites Specialist
Calgary, AB +2Tetra Tech
15+ ansCandidates need a bachelor's or master's degree in an environmental discipline, professional registration (P.Eng., P.Geo., P.Ag. or equivalent) in Alberta, and at least 15 years of hands-on experience. Strong knowledge of Alberta and federal environmental regulations, mentoring and client-relationship skills, and willingness to travel to remote sites are required.
Leadership, Coaching, Risk management, Environmental engineering, P.Eng., P.Geo.
Contrôleur(euse) de coûts
Québec, QCTetra Tech
3+ ansDEC en comptabilité, gestion ou domaine connexe; Minimum de 3 ans en contrôle de projets; Expérience en génie-conseil ou ingénierie (atout)
Microsoft Project, Microsoft Office, Excel
Ingénieur(e) en électricité industrielle
Québec, QC +5Tetra Tech
5+ ansBaccalauréat en génie électrique; Membre de l'Ordre des Ingénieurs du Québec; 5 ans et plus d'expérience en industrie lourde ou manufacturière
Electricity, Estimating, Electrical engineering, Electrical wiring diagrams, Bilingualism, French
Directeur(trice) de projets, Énergie
Montréal, QC +4Tetra Tech
10+ ansBaccalauréat en ingénierie; 10 années d’expérience minimum en énergie renouvelable; Expérience en gestion de projets multidisciplinaires et en génie-conseil
Microsoft Project, Suite Office
Vice-Président(e) Développement des affaires et marchés stratégiques
Québec, QC +8Tetra Tech
15+ ansFormation universitaire ou collégiale en génie-conseil, gestion ou administration; Plus de 15 ans d'expérience, dont des fonctions de gestion; Solide sens commercial et compréhension des grands projets
Sales, Energy, Reflexion
Vice-Président(e) Développement des affaires et marchés stratégiques
Montréal, QC +8Tetra Tech
15+ ansFormation universitaire ou collégiale en génie-conseil, gestion ou administration; Plus de 15 ans d'expérience, dont des fonctions de gestion; Solide sens commercial et compréhension des grands projets
Sales, Energy, Reflexion