Emplois “CAD assemblies” au Canada – Page 43

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Part-Time Program Manager - Funded Programs, Contract

  Canada

  40,32–50,40 $/hTemps partiel

  

  CWB Group - Industry Services

  5+ ansCandidates need at least 5 years of progressive project or program management experience, a PMP or equivalent certification, and a post-secondary education. Strong budgeting, communication and stakeholder management skills are required.

  Program management, Project management, PMP, Project management principles, Budget management, Time management

• 1 mois

  Assembler, Fixtures

  Mississauga, ON

  Temps plein

  

  MAD Elevator Inc

  1+ ansCandidates need a high school diploma or equivalent, one to two years of light assembly work, and at least one year of custom manufacturing. Strong dexterity and attention to detail are required; electrical fixture experience is preferred.

  hand tools, power tools, measuring devices

  1 mois

  R&D Mechanical Designer

  Mississauga, ON

  

  MAD Elevator Inc

  5+ ansCandidates need a Bachelor's in Mechanical Engineering or equivalent experience, at least 5 years of mechanical design including sheet metal, and hands-on SolidWorks or Inventor skills. AutoCAD, electrical knowledge and a clear criminal background check are also required.

  SolidWorks, Autodesk Inventor, AutoCAD, Jira, Confluence

• 1 mois

  Carpenter - Revelstoke

  Canada

  Temps plein

  

  Paradigm Building Solutions Ltd

  3+ ansCandidates need three to five years of carpentry or related construction experience, with strong framing skills and the ability to read drawings. Panelized construction experience, Fall Protection certification and a valid driver's licence are assets, and Red Seal is not required.

  hand tools, power tools, saws, crane

  1 mois

  Carpenter

  Revelstoke, BC +3

  Temps plein

  

  Paradigm Building Solutions Ltd

  3+ ansCandidates need three to five years of carpentry or related construction experience, strong framing skills and the ability to read blueprints. Panelized construction, crane-assisted erection, Red Seal or Journeyperson certification and Fall Protection are assets, and a valid driver's licence is preferred.

  hand tools, power tools, saws, crane

• 1 mois

  Quality Assurance Intern - Summer 2026

  Longueuil, QC

  Temps plein

  HD

  Heroux Devtek: The Corporation specializes in the design, development, manufacture, and repair and overhaul of landing gear, actuation systems and components…

  Candidates need to be enrolled in a Bachelor's program in Mechanical or Aerospace Engineering, or hold a college diploma with relevant experience. They must be bilingual in English and French, skilled in CAD software such as CATIA, and strong in data analysis and problem-solving.

  CATIA, CAD software

• 1 mois

  Manufacturing Engineer - Composites/Aerospace

  Fort Erie, ON

  

  FLEET CANADA INC: Housed in a 500,000 square foot manufacturing facility, Fleet is a proudly Canadian owned and operated Aerospace Manufacturer that specializes in…

  3+ ansCandidates need 3 to 5 years of methods or manufacturing planning experience, ideally in aerospace or composites. They must read prints and specifications, use CAD data, know MRP systems, and be strong in Excel, Word, PowerPoint and Project. An engineering certificate, diploma or degree is an asset.

  MRP system, CAD, Microsoft Excel, Microsoft Project, Microsoft PowerPoint, Microsoft Word

  1 mois

  Senior Methods Planner - Assembly

  Fort Erie, ON

  

  FLEET CANADA INC: Housed in a 500,000 square foot manufacturing facility, Fleet is a proudly Canadian owned and operated Aerospace Manufacturer that specializes in…

  5+ ansCandidates need 5+ years of methods or manufacturing planning experience, ideally in aerospace. They must read technical prints, write plans and estimates, and know MRP systems and Microsoft Office.

  Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Microsoft Project, CAD, MRP system

  1 mois

  Methods Planner - Aerospace

  Fort Erie, ON

  

  FLEET CANADA INC: Housed in a 500,000 square foot manufacturing facility, Fleet is a proudly Canadian owned and operated Aerospace Manufacturer that specializes in…

  Candidates need experience in methods or manufacturing planning, ideally in aerospace, and can read prints and technical documents. They should know shop floor processes, ERP/MRP systems and CAD data, and be proficient in Excel, Word and PowerPoint. An engineering certificate, diploma or degree is an asset.

  Microsoft Excel, Microsoft Word, Microsoft PowerPoint, ERP/MRP system, CAD

• 1 mois

  Tooling Engineer

  Montréal, QC

  FA

  FTAI Aviation LLC

  5+ ansCandidates need a bachelor's degree in mechanical, aeronautical or manufacturing engineering and five to ten years of tooling or manufacturing experience. They must read complex drawings, apply GD&T and DFM principles, and use CAD software such as SolidWorks, Siemens NX or CATIA.

  SolidWorks, Siemens NX, CATIA, Microsoft Excel, Microsoft Word, Microsoft PowerPoint

• 1 mois

  Product Engineer

  Windsor, ON

  Temps plein

  MW

  MINTH WINDSOR MANUFACTURING INC

  5+ ansCandidates need a mechanical, engineering or materials degree and at least 5 years of automotive body structure and battery enclosure design experience. Aluminum, steel, stamping, welding and GD&T skills are valued, along with strong communication for cross-functional work.

  CATIA, NX

• 1 mois

  Body Technician/ Painter

  Saint John, NB

  Temps plein

  

  Steele Auto Group: Steele Auto Group is heavily involved with, and supports the communities it operates in, while maintaining strategic partnership initiatives that…

  Candidates need experience as a body technician, strong diagnostic skills and pride in workmanship, plus a valid driver's licence and an acceptable driver abstract. They must be clean-shaven so a CSA-approved respirator can seal properly, unless they request accommodation.

  CAD

• 1 mois

  Designer I

  Edmonton, AB

  Temps plein

  

  Forum Energy Technologies: FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries.

  2+ ansCandidates need hands-on Autodesk Inventor 3D modeling experience and a technical diploma in mechanical design or engineering technology, or equivalent experience. Experience with engineering calculations, sheet metal design and manufacturing environments is preferred.

  Autodesk Inventor

• 1 mois

  Engineering Intern

  Toronto, ON +2

  Temps plein

  PI

  Pliteq Inc

  Candidates need current enrolment in a recognized post-secondary institution, with a Bachelor of Engineering preferred. CAD experience is an asset, along with strong communication skills and a team-oriented, autonomous approach.

  AutoCAD, CAD software, ERP programs, Google Drive

• 1 mois

  Co-op, Mechanical Engineer

  Hamilton, ON

  EI

  Enedym Inc

  Candidates need CAD skills (SolidWorks is named), knowledge of technical drawing standards and GD&T, and strong mechanical aptitude for workshop work. Good teamwork, documentation habits and a problem-solving mindset are also needed. Little prior experience is acceptable.

  SolidWorks

• 1 mois

  Mechanical Engineer (Liner Operations)

  Richmond, BC

  

  General Fusion Inc

  2+ ansCandidates need a mechanical engineering or engineering physics bachelor's degree and at least 2 years of relevant experience. They must have strong engineering fundamentals, prototyping experience, hands-on aptitude, GD&T knowledge and materials and fabrication understanding.

  SolidWorks, SolidWorks PDM, CAD, casting equipment, machining equipment

• 1 mois

  Tenant Services Coordinator II (Bilingual)

  Montréal, QC

  Temps plein

  

  BGIS

  3+ ansCandidates need a high school diploma plus a technical or business course, and three to five years of facility or project experience. Strong client service, written and verbal communication, and organization skills are required, along with comfort with Microsoft Office.

  MS Office, CAD, Project Tracker spreadsheet

  1 mois

  Tenant Services Coordinator

  Montréal, QC

  Temps plein

  

  BGIS

  1+ ansCandidates need a high school diploma plus a specialized technical or business course, one to three years of related experience, and strong customer service and written and verbal communication skills. Knowledge of tendering, commercial building systems and MS Office is expected, and CAD and a valid driver's licence are assets.

  MS Office, CAD

  1 mois

  Tenant Services Coordinator

  Québec, QC

  Temps plein

  

  BGIS

  1+ ansCandidates need high school completion plus a specialized technical or business course, one to three years of related experience, and strong client service and communication skills. Knowledge of tendering, commercial building systems and MS Office is also needed.

  MS Office, CAD

  1 mois

  Tenant Services Coordinator (1 Year Contract)

  Surrey, BC

  54k–68k $/anTemps plein

  

  BGIS

  1+ ansCandidates need high school completion plus a specialized technical or business course, one to three years of related experience, and strong customer service and communication skills. They should know project tendering and general commercial building systems, and be proficient with MS Office.

  MS Office, CAD

• 1 mois

  Design Engineer

  Winnipeg, MB

  Sur placeTemps plein

  LN

  Linamar - New

  Candidates need an accredited engineering or technology diploma, eligibility for APEGM or CTTAM registration, CAD and FEA skills, and knowledge of mechanical, hydraulic and electro-mechanical systems. A farm background and hands-on machining or welding experience are valued.

  CAD system, FEA software

• 1 mois

  Intermediate Mechanical Designer

  Brampton, ON

  Sur placeTemps plein

  E

  EXP

  5+ ansCandidates need a diploma in mechanical engineering technology or design and at least 5 years of mechanical design experience in oil and gas, petrochemical or industrial equipment. Strong CAD skills and knowledge of industry codes such as ASME and API are required.

  SolidWorks, AutoCAD, Inventor, Plant 3D, NavisWorks

• 1 mois

  Mechanical Engineer II

  Campbell River, BC

  

  Poseidon Ocean Systems: Poseidon Ocean Systems is a Canadian-based aquaculture technology company that specializes in the design, manufacturing and installation of…

  4+ ansCandidates need a bachelor's or master's degree in mechanical engineering, 4+ years of mechanical design experience, and a P. Eng or eligibility for registration in Canada. Proficiency with CAD packages such as SolidWorks is required.

  SolidWorks, SolidWorks PDM, Microsoft Excel

• 1 mois

  Building Science Technologist / Senior Building Science Technologist

  Mississauga, ON

  Temps plein

  

  Pinchin Canada

  Pinchin Canada needs candidates with an architectural, civil engineering or building science diploma or degree, knowledge of building envelope assemblies, and experience writing technical reports. AutoCAD, Ontario Building Code knowledge, a valid driver's licence and fieldwork ability are also needed.

  AutoCAD

17 entreprises