Intermediate Land Development Engineer
Dartmouth, NSStantec
5+ ansCandidates need a civil engineering degree and P.Eng. registration, and at least five years of land development experience is strongly preferred. Strong communication, attention to detail, and proficiency in AutoCAD and Microsoft Office are required, with stormwater modelling software an asset.
AutoCAD, Microsoft Office, Microsoft Teams, H2OMAP, Infoworks, EPASWMM
Mechanical Field Representative
Vancouver, BCStantec
10+ ansCandidates need a diploma or degree in mechanical engineering or engineering technology and 10+ years in mechanical design, building systems or construction administration. Strong field coordination, document control and problem-solving skills are required.
Problem solving, Building systems monitoring technology, Plumbing, Building automation, Regulatory compliance, Track geometry
Senior Wastewater Treatment Engineer
Burnaby, BC +6Stantec
10+ ansCandidates need a bachelor's degree in an engineering discipline, a P.Eng. licence in BC, and at least 10 years of progressive municipal wastewater treatment experience. Strong modelling and design software skills, leadership, client management and clear written communication are required.
BioWin, GPS-X, SUMO, AutoCAD, Civil 3D, Revit
Contract Administrator
Calgary, AB +1Stantec
2+ ansCandidates need 2 to 10 years of contract administration, procurement or project support experience, a diploma or degree in business, supply chain, engineering or construction management, and strong communication and analytical skills. EPC/EPCM experience and SCMP designation are assets.
Microsoft Office Suite, Document management systems
Mechanical Site Engineer - Buildings
Vancouver, BC +1Stantec
7+ ansCandidates need a mechanical engineering degree, 7+ years of building mechanical or HVAC experience, and a Professional Engineer licence or the ability to register with EGBC quickly. Strong communication, problem-solving and knowledge of building codes are also expected.
Revit, AutoCAD, Revizto, Microsoft Office Suite, heat load calculation software, SCADA
Substation Construction Manager
Vancouver, BC +1Stantec
15+ ansCandidates need at least 15 years of construction management experience, including brownfield or live generation work, and experience with substation outages and high-voltage commissioning. A Bachelor's degree in engineering or construction management and safety certifications such as CSTS, first aid, and energy isolation are needed.
Lock out tag out equipment
Intermediate Mechanical Engineer- Water
Edmonton, AB +3Stantec
7+ ansStantec needs a mechanical engineering bachelor's degree, at least 7 years of HVAC, plumbing and fire protection design experience in water or wastewater, and a Canadian professional engineer licence. Candidates should know load calculation software, Revit, AutoCAD, NFPA 820 and local mechanical and plumbing codes.
Revit, AutoCAD, HAP 6.1, Trace 3D
Buyer/Expeditor - Power Delivery
Vancouver, BC +2Stantec
5+ ansCandidates need 5+ years of sourcing, contract management or similar experience, ideally on complex EPC or EPCM projects. A bachelor's degree in a business or technical field is required, and experience with BC Hydro, public sector procurement law and supply chain certification are assets.
Microsoft Office, Microsoft Excel
Building Science Engineer
Burnaby, BC +1Stantec
10+ ansCandidates need a P.Eng in British Columbia, at least 10 years of building envelope experience and a Bachelor's degree in Engineering, Architecture or Science. They also need strong project management, Microsoft Office, Bluebeam, CAD or Revit skills, and a valid driver's licence.
Microsoft Office, Bluebeam, CAD, Revit
Senior Process Engineer- Water
Toronto, ON +11Stantec
10+ ansCandidates need a bachelor's degree in an engineering discipline, a P.Eng. licence and at least 10 years of experience. They must be strong at process mechanical design, project management, client relations and clear technical writing.
Mechanical engineering, Mechanical systems, Leadership, Communication skills, Client relationship management, Health and safety
Mechanical Technologist
Yellowknife, NTStantec
2+ ansCandidates need a mechanical engineering technology or engineering design diploma (or equivalent) and 2+ years of Revit and AutoCAD drafting experience. Working knowledge of Revit is required, and knowledge of building codes and mechanical systems is an asset.
Autodesk Revit, AutoCAD
Intermediate Conveyance Engineer - Water
Burnaby, BC +6Stantec
5+ ansCandidates need a bachelor's degree in mechanical, civil or environmental engineering, a P.Eng. (or eligibility in BC), and 5 to 10 years of water or wastewater infrastructure experience. Hydraulic modelling skills in tools such as AFT Fathom, InfoWorks or WaterGEMS are required.
AFT Fathom, InfoWorks, InfoWater, WaterGEMS, SewerGEMS, ANSYS Fluent
Intermediate Land Development Engineer
Ottawa, ONStantec
5+ ansCandidates need a civil engineering degree and a Professional Engineer licence with Professional Engineers Ontario. They should understand civil design such as stormwater, grading and roadway work, and know AutoCAD, PCSWMM and Microsoft Office.
AutoCAD, PCSWMM, Microsoft Office, Microsoft Teams
Project Architect, Mission Critical Facilities
Calgary, AB +5Stantec
8+ ansCandidates need a professional architecture degree, 8+ years of commercial architecture experience including 2+ years on mission critical or data center projects, and advanced Revit skills. A current architectural license is preferred and LEED Green Associate or LEED AP is an asset.
Revit, AutoCAD, SketchUp, Adobe Creative Suite
Structural EIT
Fredericton, NB +2Stantec
Stantec needs a candidate with a structural engineering degree, knowledge of Canadian and international design codes, and skill with structural analysis software. Strong written and verbal communication and a valid driver's licence are also required.
STAAD.Pro, AutoCAD, Microsoft Office
Senior Construction Inspector - Conveyance
Toronto, ON +3Stantec
10+ ansCandidates need a technical construction diploma or equivalent experience, at least 10 years on large-diameter watermain projects including tunneling and open-cut CPP, and 5 years on municipal linear projects. P.Eng., CET, NASSCO certification and AutoCAD skills are assets.
Program management, Construction management, Leadership, Decision making, Inspection, Regulatory compliance
Construction Contract Administrator - Conveyance
Toronto, ON +3Stantec
10+ ansCandidates need a technical degree, diploma or certificate in construction, or equivalent contract administration experience with supervisory responsibility, plus at least 10 years on watermain, sewer, tunnelling, open cut or concrete pressure pipe projects. P.Eng or CET is preferred.
Microsoft Office
Construction Inspector – Water/Wastewater Treatment
Toronto, ON +1Stantec
7+ ansCandidates need at least 7 years of vertical project experience, ideally on water and wastewater treatment plants and pumping stations. They also need knowledge of building codes, strong technical drawing and scheduling skills, Microsoft Office, and an Ontario driver's licence.
Microsoft Office, AutoCAD, Critical path method scheduling software
Intermediate Civil Engineering Technologist
Red Deer, ABStantec
5+ ansCandidates need a technical diploma or equivalent plus at least 5 years of experience. They must know AutoCAD Civil 3D, codes and design requirements, and tools such as Bluebeam Revu and Microsoft Office, and work well under tight deadlines.
AutoCAD Civil 3D, Bluebeam Revu, Adobe, Microsoft Office
Electrical Engineer - Mission Critical Facilities
Calgary, AB +5Stantec
3+ ansCandidates need an accredited engineering degree or equivalent experience, with practical knowledge of electrical design practices and software such as AutoCAD and Revit. Experience in data centers, a professional engineer or EIT designation, and power systems software are preferred.
AutoCAD, Revit, Autodesk Construction Cloud, SKM, CYME CYMCAP
Project Manager - Roadways
Edmonton, AB +1Stantec
12+ ansCandidates need Professional Engineer registration in Alberta, a civil engineering degree and at least 12 years of transportation project management experience. Strong leadership, presentation and communication skills, and a valid driver's licence with a good driving record, are also required.
Microsoft Office 365
Senior Electrical, Instrumentation and Controls Engineer- Water
Dartmouth, NS +2Stantec
15+ ansCandidates need a bachelor's degree in electrical engineering or electrical engineering technology, a Professional Engineer licence in Canada, and at least 15 years of consulting experience on water and wastewater infrastructure. Advanced power system study knowledge is also required.
ETAP, SKM PowerTools, EasyPower, AutoCAD, Revit, MicroStation
Intermediate Structural Technologist
Calgary, AB +2Stantec
4+ ansCandidates need a construction-focused technology diploma, at least 4 years of experience, and skill in Revit, AutoCAD, Bluebeam and Autodesk BIM 360 and Forma. Stantec also asks for strong organization, teamwork and knowledge of sustainable design and embodied carbon.
Revit, AutoCAD, Autodesk BIM 360, Forma, Bluebeam, Microsoft Teams
Senior Project Manager
Whitehorse, YT +1Stantec
10+ ansCandidates need a Professional Engineer licence or eligibility to register in the Yukon and Northwest Territories and Nunavut, a civil engineering degree, and at least 10 years of transportation project management experience. Strong leadership, communication and proposal skills are also required.
Microsoft Office 365