Emplois “precision maintenance tools” au Canada – Page 46

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Journeyperson Pipefitter (Night Shift)

  Calgary, AB

  Temps plein

  

  Startec

  Candidates need a Journeyman Pipefitter certification or equivalent and proven pipefitting experience. They also need blueprint reading skills, knowledge of pipe materials and codes, and good physical condition.

  Flame cutting torch, Overhead crane, Jib crane, Welding equipment

  1 mois

  Journeyperson Millwright

  Calgary, AB

  Temps plein

  

  Startec

  Candidates need a Journeyman Millwright certification from a recognized apprenticeship, plus experience in an oil and gas manufacturing environment. Strong mechanical, hydraulic, pneumatic and welding knowledge, blueprint reading and troubleshooting skills, and good physical stamina are required.

  precision measuring tools, hand and power tools, welding equipment

• 1 mois

  Red Seal Millwright for FIFO Mining Construction in Nunavut

  Edmonton, AB

  Contrat

  

  Sideworx Connect Inc

  3+ ansCandidates need journeyman millwright certification (Red Seal preferred), three to five years of industrial millwright experience, and a valid driver's licence with a clean abstract. Alberta residence is strongly preferred, and candidates must be fit for demanding work in a remote camp.

  Precision alignment tools, Blueprints and schematics, Hydraulic equipment, Pneumatic equipment, Welding equipment

• 1 mois

  Millwright Apprentice

  Toronto, ON

  22–38 $/hTemps plein

  

  Bullet Trade Services

  Candidates need millwright experience on industrial equipment and a willingness to travel to customer sites. They must bring their own hand tools; the employer supplies specialty tools, power tools and PPE.

  hand tools, power tools, rigging equipment

  1 mois

  Millwright Apprentice

  Guelph, ON

  22–38 $/hTemps plein

  

  Bullet Trade Services

  Candidates need millwright experience on industrial equipment and a willingness to travel to customer sites. They must bring their own hand tools; the employer supplies specialty tools, power tools and PPE.

  hand tools, power tools, rigging equipment

  1 mois

  Millwright

  Kitchener, ON

  30–45 $/hTemps plein

  

  Bullet Trade Services

  Candidates need significant millwright experience on industrial equipment, a willingness to travel to customer sites, and their own hand tools. The employer supplies specialty tools, power tools and PPE.

  hand tools, power tools, rigging equipment

  1 mois

  Millwright

  Toronto, ON

  30–45 $/hTemps plein

  

  Bullet Trade Services

  Candidates need significant millwright experience on industrial equipment, a willingness to travel to customer sites, and their own hand tools. The employer supplies specialty tools, power tools and PPE.

  hand tools, power tools, rigging equipment

  1 mois

  Millwright

  Guelph, ON

  30–45 $/hTemps plein

  

  Bullet Trade Services

  Candidates need significant millwright experience on industrial equipment, a willingness to travel to customer sites, and their own hand tools. The employer supplies specialty tools, power tools and PPE.

  hand tools, power tools, rigging equipment

• 1 mois

  Mechanical Machine Tool Builder

  LaSalle, ON

  26–52 $/hTemps plein

  

  CenterLine (Windsor) Limited

  Candidates need a Secondary School Diploma, mold, tool assembly or tool maintenance experience, and a valid driver's licence. Travel across Canada, the USA and Mexico is required, and knowledge of welding equipment and MIG and resistance spot welding is an asset.

  Manual lathe, Small mill, Welding equipment

• 1 mois

  Diesel Mechanic

  North Bay, ON

  40,55 $/hTemps plein

  

  Ontario Northland

  3+ ansCandidates need a valid Certificate of Qualification (421A, 310T or 310S), 3 to 5 years of trade experience, and blueprint reading skills. Knowledge of hydraulics, pneumatics and basic electrical systems, plus flexibility with shifts and comfort in a unionized environment, are also required.

  Micrometers, Dynamometer, Fuel injection testing equipment, Overhead crane, Forklift, Elevated work platform

• 1 mois

  Spécialiste livraison et support / Delivery & Support Specialist - Video

  Montréal, QC

  Temps plein

  

  Genetec: Leading technology provider of business intelligence, unified physical security, public safety, and operations.

  2+ ansBaccalauréat en génie logiciel, génie informatique, informatique ou expérience équivalente; Au moins 2 ans de dépannage d'applications client/serveur Windows et/ou Linux; Solide maîtrise des réseaux, TCP/IP, VPN, DNS, DH

  Wireshark, Perfmon, Procmon, VMware, Hyper-V, Kubernetes

  1 mois

  Spécialiste livraison et support / Delivery & Support Specialist - Integration

  Montréal, QC

  Temps plein

  

  Genetec: Leading technology provider of business intelligence, unified physical security, public safety, and operations.

  2+ ansBaccalauréat en génie logiciel, informatique ou expérience équivalente; Au moins 2 ans de dépannage client/serveur sous Windows et/ou Linux; Solides connaissances en réseaux IP et diffusion vidéo

  Wireshark, Perfmon, Procmon

  1 mois

  Spécialiste en systèmes de fabrication / Manufacturing Systems Specialist

  Montréal, QC

  Temps plein

  

  Genetec: Leading technology provider of business intelligence, unified physical security, public safety, and operations.

  3+ ansBaccalauréat en génie électrique; Au moins 3 ans en fabrication électronique ou support matériel; Solides compétences en diagnostic électronique

  C#/.NET

• 1 mois

  Facilities Technician / Technicien d'installations

  Kahnawake, QC

  23 $/hTemps plein

  

  Playground

  Bilingue français et anglais (un atout), 18 ans ou plus; Expérience avérée en plomberie, électricité, peinture ou rénovation; Maîtrise des outils manuels et électriques

  hand tools, power tools, hoists, saws, drills, precision measuring instruments

• 1 mois

  Windsor, ON - Independent Delivery Partner Wanted

  Windsor, ON

  Contrat

  

  Precision Parcel & Package Deliveries: Precision is a leading final mile delivery service provider under the Fastfrate Group, focused on delivering efficient, reliable, and holistic…

  Candidates need a full G licence, a clean driver's abstract, $2M liability insurance and a vehicle such as a minivan or SUV. They must be able to lift 50 lbs and pass a criminal background check.

  Smartphone, GPS navigation, Handheld scanner, DocuSign, Delivery app

• 1 mois

  Conventional Machinist

  Pointe-Claire, QC

  28–35 $/hTemps plein

  

  ADI - Albert Davidson Industries

  Candidates need hands-on experience as a conventional machinist, toolmaker or maintenance machinist, and skill with calipers and micrometers. Experience in manufacturing, plastics, rubber or polyurethane is an asset, along with the ability to lead by example.

  manual lathe, milling machine, drill press, band saw, grinder, vernier calipers

• 1 mois

  IT Service Desk Lead (Full Time)

  Charlottetown, PE

  Temps plein

  RR

  Revolution Recruiting

  5+ ansCandidates need a diploma or degree in IT or a related field, or equivalent experience, plus at least five years of progressive IT support experience. Strong customer service, troubleshooting, training and communication skills are needed, along with the ability to lift 25 to 50 lbs and work on-site.

  Microsoft 365, Windows, HaloITSM, Intune, Azure, remote support tools

• 1 mois

  Automation Technician II

  Burnaby, BC

  76k–108k $/anTemps plein

  

  LMI Technologies

  2+ ansCandidates need a diploma in mechanical, mechatronics or controls engineering/technology and 2-4 years of related experience. Strong troubleshooting, CAD (SolidWorks), motion control knowledge and clear communication are required.

  SolidWorks, precision measurement tools, lenses, cameras and filters

• 1 mois

  Electronics Assembler

  Calgary, AB

  Temps plein

  

  Blackline Safety

  Candidates need proven electronics assembly and soldering experience, the ability to read engineering drawings and schematics, and strong attention to detail. A high school diploma is required, and electronics certifications are an asset.

  Soldering iron, Precision hand tools

• 1 mois

  Facility Manager

  Ottawa, ON

  80k–120k $/anTemps plein

  

  Q-Block Computing: Imagine instruments precise enough to probe this reality—to ask whether the cosmos operates according to Nature’s own algorithms.

  5+ ansQ-Block Computing needs a journeyperson or Red Seal holder, or someone with equivalent hands-on experience, in electrical, carpentry, construction or building maintenance. Candidates need 5+ years of commercial construction or multi-trade experience and proven skill managing subcontractors.

  hand tools, power tools, ladders, lifts

  1 mois

  Embedded Systems Developer Intern

  Ottawa, ON

  18–25 $/hTemps plein

  

  Q-Block Computing: Imagine instruments precise enough to probe this reality—to ask whether the cosmos operates according to Nature’s own algorithms.

  Candidates need to be enrolled in an undergraduate engineering or computer science program with at least 60 credit hours completed. They need embedded experience with microcontrollers, working C or C++ skills, and familiarity with SPI, I2C or UART.

  oscilloscope, logic analyzer, multimeter, signal generator, STM32, Arduino

  1 mois

  CNC Machinist (Programmer)

  Ottawa, ON

  60k–100k $/anTemps plein

  

  Q-Block Computing: Imagine instruments precise enough to probe this reality—to ask whether the cosmos operates according to Nature’s own algorithms.

  4+ ansCandidates need a machinist trade certification or equivalent, at least 4 years of CNC experience with G-code, and strong SolidWorks and CAM skills. They must machine to tight tolerances, read engineering drawings, and keep organized shop and inspection records.

  SolidWorks, SolidCAM, Fusion 360, MasterCAM, SolidWorks CAM, Datron Neo 2+

• 1 mois

  Specialist, Protection & Control

  Hamilton, ON

  45–55 $/hTemps plein

  SP

  Spark Power

  5+ ansSpark Power needs an experienced candidate with 5+ years in protection and control, an electrical engineering degree or diploma, and knowledge of OESC, IEEE and NETA standards. They need hands-on relay test skills and a valid Class G licence, and must be willing to travel across Ontario.

  Omicron relay tester, AutoCAD, SCADA, RTU, SEL, Siemens

• 1 mois

  Service Technician

  Nobleton, ON

  35–45 $/hTemps plein

  

  Premier Equipment

  2+ ansCandidates need at least 2 years of hands-on service repair experience, strong mechanical, hydraulic and electrical diagnostic skills, and good customer service and communication skills. A valid driver's licence and the ability to lift 75 lbs are required, and a licensed technician credential is preferred.

  diagnostic tools, John Deere diagnostic equipment, forklift, CDL vehicle

15 entreprises