Emplois “hydraulic systems” au Canada – Page 47

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Maintenance Mechanic (Night)

  Brampton, ON

  Contrat

  PP

  Patch & Permasearch

  Candidates need prior maintenance or industrial mechanic experience, ideally in food manufacturing. Strong troubleshooting across mechanical, electrical, pneumatic and hydraulic systems is required, and the work demands willingness to work nights, weekends and rotating shifts.

  PLC, blueprints, schematics, equipment manuals

  26j

  Maintenance Mechanic

  Woodbridge, ON

  Contrat

  PP

  Patch & Permasearch

  Patch & Permasearch's client needs an experienced maintenance mechanic with strong troubleshooting skills in mechanical, electrical, pneumatic and hydraulic systems. Candidates should know food safety standards such as GMP, HACCP and SQF, read blueprints and manuals, and work well in fast-paced 24/7 production.

  PLC, blueprints, schematics, equipment manuals

  26j

  Truck Body Assembler

  Kitchener, ON

  Temps plein

  PP

  Patch & Permasearch

  Candidates need experience as a truck body, trailer or heavy equipment assembler, or similar work, and can read blueprints and use hand and power tools. Welding or fabrication experience is an asset, along with mechanical aptitude and attention to detail.

  hand tools, power tools, drills, grinders, shop equipment

  26j

  Hydraulic Assembler

  Kitchener, ON

  Temps plein

  PP

  Patch & Permasearch

  Candidates need hands-on experience with trucks, mobile or heavy equipment and hydraulic systems. They must read schematics and technical drawings, troubleshoot leaks and pressure problems, and show strong mechanical aptitude and attention to detail.

  hydraulic testing equipment, hand tools, power tools

• 26j

  Automation Specialist

  Toronto, ON

  LR

  Leap Recruitment Partners

  5+ ansCandidates need a three-year diploma in Electro-Mechanical Technology and at least 5 years of maintenance or automation experience. They also need PLC, pneumatic, hydraulic and low-voltage electrical skills, the ability to read blueprints, forklift operation, and lock-out knowledge.

  PLC, forklift, blueprints

  26j

  Maintenance Technician

  Toronto, ON

  LR

  Leap Recruitment Partners

  3+ ansCandidates need a two-year technician diploma, at least three years of maintenance experience, and strong English communication. Knowledge of lock-out procedures, PLCs, pneumatics, hydraulics and low-voltage electrical systems is required.

  PLC, IQMS, MS Word, Excel, Outlook, robots

• 26j

  Heavy Equipment Mechanic

  Toronto, ON

  38–45 $/hTemps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  3+ ansCandidates need a valid 310T or 421A mechanic certification (Red Seal is an asset), preferably 3 or more years of Canadian heavy equipment or fleet experience, and hands-on work with Caterpillar backhoes, excavators, hydrovac trucks and dump trucks. A valid Ontario driver's licence with a clean abstract is required.

  Caterpillar backhoe, Hydraulic excavator, Hydrovac truck, Dump truck, Welding equipment, Diagnostic tools

• 26j

  Heavy Duty Mechanic - Journeyman/Red Seal

  Edmonton, AB +5

  

  Matrix Camps and Logistics: Matrix is a national company providing camps, logistics and aviation management in every active exploration region of Canada.

  3+ ansCandidates need a Red Seal Journeyperson Heavy Duty Mechanic certification and at least 3 to 5 years maintaining mining or surface fleet equipment. Strong hydraulics, electrical and diesel powertrain skills, CAT ET and SIS proficiency, and experience in cold, remote conditions are required.

  CAT ET, CAT SIS, wiring diagrams, hydraulic schematics, service manuals, CMMS

• 26j

  Power HVAC Mechanic/Electrician Technician

  Calgary, AB

  T

  TalentSphere

  5+ ansCandidates need at least five years repairing power or HVAC equipment, expert generator and paralleling knowledge, and a high school diploma. Journeyman Electrical certification or heavy duty mechanic experience is strongly preferred.

  Diagnostic tools, Schematics

  26j

  Junior - Intermediate Hydraulic Modeller (Water/Wastewater)

  Mississauga, ON

  T

  TalentSphere

  2+ ansCandidates need a Professional Engineer licence in Ontario, or eligibility within one year, plus 2 to 4 years of municipal water or wastewater hydraulics experience for junior roles, or 4+ years for intermediate roles. Strong hydraulics, modelling software, GIS and communication skills are required.

  WaterGEMS, SewerGEMS, Infoworks ICM, InfoWater, PCSWMM, ArcGIS

  26j

  Fire Sprinkler Designer

  Toronto, ON

  T

  TalentSphere

  3+ ansCandidates need at least 3 years of fire sprinkler design experience, strong knowledge of NFPA 13, 13R, 13D, 14 and 20 and the Ontario Building Code, and skill in AutoCAD and HydraCAD/HydraCALC. They also need a valid Ontario driver's licence, a vehicle, and residence in the GTA.

  AutoCAD, HydraCAD, HydraCALC

  26j

  Fire Protection Engineers, Mechanical - Relocation Assistance available.

  Toronto, ON

  T

  TalentSphere

  5+ ansCandidates need a Bachelor's degree in mechanical or electrical engineering, a P.Eng. designation and at least 5 years in fire protection or life safety consulting. Strong knowledge of NFPA, ULC, Ontario Building Code and Ontario Fire Code is required.

  HydraCAD

  26j

  Fire Protection Engineer - Mechanical (P.Eng), Relocation Assistance Available

  Mississauga, ON

  T

  TalentSphere

  Candidates need a P.Eng. licence and a strong background in fire protection system design and building code compliance. Experience with the Ontario Building Code, NFPA standards and ULC requirements is expected.

  P.Eng., Regulatory compliance, Documentation, Inspection, Technical support

  26j

  Power HVAC Mechanic/Electrician Technician

  Bolton, ON

  90k–120k $/an

  T

  TalentSphere

  5+ ansCandidates need at least 5 years of hands-on experience with industrial power, heavy equipment or HVAC systems, strong diesel and generator knowledge, and a valid driver's licence with a clean record. Strong troubleshooting, the ability to lift 45 lbs and personal tools are required.

  Diagnostic tools, Schematics, Technical manuals, Generator controls, Paralleling switchgear

• 26j

  Service Technician I - Alberta, CA (m/f/d)

  Alberta

  35–40 $/h

  

  Nordex Group: The headoffice of the company, with the Management Board and central corporate functions, is located in Hamburg, while the legal entity is…

  Candidates need a high school diploma or equivalent technical training, with wind, electrical or mechanical education as an asset. They must read technical schematics, work at heights over 300 feet, lift up to 50 lbs, and speak fluent English.

  hand tools, power tools

• 26j

  Aircraft Mechanics Technician (72404)

  Windsor, ON

  GA

  GAL AeroStaff (Gal Aero Staff Ltd.)

  5+ ansCandidates need at least 5 years of MRO experience, a technical college degree in aerospace or equivalent, and English at a B2 level. They must be able to lift up to 50 pounds and work any shift, weekends and overtime.

  Aircraft mechanics, Regulatory compliance, Troubleshoot, Mechanical systems, Technical drawings, Cleaning

• 26j

  Mechanical Engineering Technician

  Pointe-Claire, QC

  42–50 $/h

  GA

  GAL AeroStaff

  Candidates need an associate's degree or higher in mechanical engineering technology or a related field, plus proven experience with CAD software such as AutoCAD, SolidWorks or Creo. They also need knowledge of GD&T, machining, welding, precision measuring tools and ASME codes.

  AutoCAD, SolidWorks, Creo, Unigraphics NX8, Teamcenter, SAP

  26j

  Aircraft Mechanic -PointeClaire (72404)

  Pointe-Claire, QC

  GA

  GAL AeroStaff

  2+ ansCandidates need at least 2 years of aircraft maintenance experience, strong knowledge of aircraft mechanical systems, and the ability to read technical manuals and schematics. Solid troubleshooting skills and comfort in a fast-paced, safety-critical setting are also required.

  Inspection, Undertake inspections, Troubleshooting, Control systems, Mechanical systems, Regulatory compliance

  26j

  Aircraft Mechanic-Mount Hope (72404)

  Mount Hope, ON

  GA

  GAL AeroStaff

  2+ ansCandidates need at least 2 years of aircraft maintenance experience, strong knowledge of aircraft mechanical systems, and the ability to read technical manuals and schematics. They also need solid troubleshooting skills and the ability to work in a safety-critical environment.

  Inspection, Undertake inspections, Troubleshooting, Control systems, Mechanical systems, Regulatory compliance

  26j

  Aircraft Mechanics Technician - Calgary (72404)

  Calgary, AB

  GA

  GAL AeroStaff

  2+ ansCandidates need a diploma in aircraft maintenance or equivalent and 2-3 years of aircraft maintenance experience in a production or MRO setting. They must read blueprints and technical manuals, troubleshoot well, and work safely in a regulated environment.

  precision instruments, specialized tools

• 26j

  Industrial Millwright

  Trenton, ON

  46,34 $/h

  

  BITS Recruiting

  Candidates need a valid Industrial Mechanic Millwright Certificate (433A) and a completed apprenticeship or trade program. They also need strong troubleshooting skills, fabrication experience, and flexibility to work rotating 12-hour shifts.

  Lathe, Grinder, PLC

• 26j

  Mill Dewatering Operator

  Vancouver, BC +5

  Temps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  Candidates need a high school diploma, a valid Class 5 driver's licence and direct hard-rock mineral processing experience, including control systems, filter presses and slurry pumps. Experience with concentrate dryers or commissioning is an asset, and the candidate must work well on a rotating day and night camp schedule.

  plate and frame filter press, slurry pumps, overhead cranes, mobile equipment

  26j

  Mill Crusher Operator

  British Columbia

  39–52 $/hTemps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  Candidates need high school completion, a valid Class 5 driver's licence, and direct experience operating jaw or gyratory crushers, conveyors, feeders and distributed control systems in hard rock mining. Commissioning experience and certifications such as Edumine or Metso are assets.

  overhead crane, conveyor, jaw crusher, rock breaker

• 26j

  Attendant, Stores

  Ontario

  À la journée

  TO

  The Ottawa Hospital: The Ottawa Hospital is one of Canada’s largest learning and research hospitals, with more than 1,100 beds, approximately 12,000 staff members and an…

  1+ ansCandidates need a Secondary School Diploma, six months of warehouse experience including recent forklift or pallet lifter use, and a valid material handling licence or willingness to recertify. Knowledge of inventory control, medical products and computerized materials systems is needed.

  Pallet lifter, Order picker, Hydraulic lift, Oracle, WMS

11 entreprises