Emplois “Electrical plant” au Canada – Page 49

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 28j

  TIG Alloy Welders

  Alberta

  Temporaire

  

  ACTIMS

  Candidates need welding experience, and journeyman status is preferred. They must work safely around heavy equipment, often at heights, in cramped and dirty conditions.

  Cutting torch, Heavy equipment

  28j

  Instrumentation Technicians

  Alberta

  Temporaire

  

  ACTIMS

  Candidates need hands-on instrumentation experience, ideally as a journeyman, and knowledge of CSA, ISA and API installation standards. They must be able to work on construction sites with cramped, dirty conditions and occasional chemical exposure.

  Pneumatic testing devices, Electrical testing devices, Electronic testing devices

  28j

  Boilermakers

  Alberta

  Temporaire

  

  ACTIMS

  Candidates need journeyman-level boilermaking experience, with the ability to lay out, cut, fit and weld heavy plate steel. The work involves cramped, noisy and sometimes high-altitude conditions.

  Shears, Drill press, Oxy-fuel torch

• 28j

  CNC Repair Specialist

  Richmond, BC

  Temps plein

  

  Dometic Corporation

  5+ ansCandidates need at least 5 years of machine and machine tool repair experience and familiarity with CNC controllers such as Fanuc, Mitsubishi, Siemens, Mazatrol, Mori Seiki and Okuma. Understanding of G-code and hands-on skill with lathes, mills and hand tools are also needed.

  Lathes, Mills, Hand tools, Servo drives, Ball screws, CNC controllers

• 28j

  Electrical Engineer III

  Montréal, QC

  Télétravail

  

  RES

  5+ ansCandidates need a Bachelor's in Electrical Engineering (or 8 years of equivalent experience), a PE or P.Eng, and 5+ years in power generation with EPC experience. They also need advanced skills in power systems analysis, electrical design, and US and Canadian standards, plus strong technical writing.

  DIgSILENT, SKM, ETAP, PSS/E, WinIGS, CDEGS

• 28j

  Engineer Field Service I-CAN

  Edmonton, AB

  Temps plein

  

  Toshiba: (TAI): Corporate holding company

  Candidates need an associate degree in electrical or electronic technology or equivalent, 0 to 5 years of field service or industrial equipment experience, and strong troubleshooting skills. They must be able to travel up to 80% and work independently in plants and job sites.

  VFD, AutoCAD, diagnostic and configuration software

• 28j

  Canada Field Service Technician

  Cambridge, ON

  Temps plein

  MC

  Mazak Corporation

  1+ ansCandidates need a Millwright or Electrician certification or diploma and 1-3 years of field service experience. They should be able to read engineering drawings and PLC and hydraulic/pneumatic circuits, hold a G driver's licence, and have strong Windows, Office and writing skills.

  Test indicators, Test bars, Clamp force gauges, MS Office, PLC

  28j

  Field Service Technician

  British Columbia

  Temps plein

  MC

  Mazak Corporation

  5+ ansCandidates need 5-7 years of field service experience and a 2-year technical diploma in electronics, mechanical or machine tool assembly. They must read engineering drawings, understand PLC and hydraulic/pneumatic circuits, and lift up to 50 lbs repeatedly.

  Test indicators, Test bars, Gages

  28j

  Field Service Technician

  Cambridge, ON

  Temps plein

  MC

  Mazak Corporation

  1+ ansCandidates need a Millwright or Electrician certification or diploma, 1 to 3 years of field service experience, the ability to read engineering drawings, PLC and hydraulic or pneumatic circuits, a G driver's licence, and strong writing and reporting skills.

  indicators, test bars, clamp force gauges, MS Office, PLC

• 28j

  Industrial Mechanic

  Airdrie, AB

  

  Shearer's Foods: Shearer’s Foods, founded in 1974 and headquartered in Massillon, OH, is a leading manufacturer of salty snacks, cookies, and crackers.

  2+ ansCandidates need a post-secondary education or apprenticeship in a mechanical trade and two years of field service or field repair experience. Strong automation and troubleshooting skills, comfort with electrical and PLC controls, and the ability to use hand and power tools are also required.

  PLC, VFD, hand tools, power tools, hydraulic systems, pneumatic systems

  28j

  Electrician - Food Manufacturing

  Airdrie, AB

  Contrat

  

  Shearer's Foods: Shearer’s Foods, founded in 1974 and headquartered in Massillon, OH, is a leading manufacturer of salty snacks, cookies, and crackers.

  3+ ansCandidates need 3 to 5 years of manufacturing maintenance electrical experience, preferred, and PLC experience. They should know electrical theory, schematic reading, motor control and testing instruments such as VOM meters and meggers.

  VOM meter, Megger, Ammeter, Ohmmeter, Voltmeter, Chart recorder

• 28j

  JP Instrumentation with Rope Access Certification

  Kitimat, BC

  59,50 $/h

  

  Tacten Industrial Inc

  Candidates need a Journey Person Instrumentation certification, IRATA rope access certification or willingness to obtain it, and current BC safety certifications. Experience with DCS, PLC and ESD systems and knowledge of cryogenic processes and instrumentation standards are required.

  DCS, PLC, ESD systems, gas chromatographs, moisture analyzers, CMMS

  28j

  Rope Access Journeyperson Instrumentation Technician - Marine Loading Arms - LNG Kitimat, BC

  Kitimat, BC

  64,50 $/h

  

  Tacten Industrial Inc

  Candidates need a Journeyperson Instrumentation Certification, IRATA rope access certification or willingness to obtain it, and BC safety certifications. Tacten requires experience with DCS, PLC and ESD systems, reading P&IDs and loop drawings, and knowledge of CSA, API and ISA standards.

  DCS, PLC, ESD systems, CMMS, gas chromatograph, moisture analyzer

• 28j

  Electrical Engineer & Project Manager, BESS

  Brampton, ON

  HybrideTemps plein

  S

  Socomec

  5+ ansCandidates need a bachelor's degree in electrical engineering and about 5 years of project management, design and deployment experience with energy storage or power systems. Strong knowledge of power system studies, low voltage standards and North American codes, plus strong English communication, is required.

  MS Office, power system analysis software

• 28j

  Maintenance Supervisor

  Entwistle, AB

  

  Drax Group: Drax Group is a renewable energy company engaged in renewable power generation, the production of sustainable biomass and the sale of renewable…

  5+ ans5+ gestionCandidates need at least 5 years of progressive maintenance leadership, ideally in bio-energy or wood products, plus a Red Seal certification and a valid driver's licence. Strong safety commitment, team leadership, communication and Microsoft Office skills are essential.

  D365, work order system, Purchase Order system

• 28j

  Electrician

  Prince Edward Island

  Temps plein

  

  JDI

  2+ ansCandidates need an Industrial Red Seal or Block Electrician certificate and 2 to 5 years of electrical experience. Instrumentation, electronics, CMMS and PLC experience are assets, and the job requires working rotating shifts, weekends and overtime in hot, cold or wet conditions.

  PLC, CMMS

• 28j

  Manager, NA Capital & MRO Procurement

  Florenceville-Bristol, NB

  Temps plein

  

  McCain Foods

  7+ ansCandidates need seven or more years of MRO procurement, plant maintenance or supply chain experience in manufacturing, plus a technical maintenance background. Strong program management, CMMS/EAM and procurement technology skills are required, with SAP S/4HANA and PMP as assets.

  CMMS, EAM, SAP S/4HANA, Spend analytics tools, Contract management systems

• 28j

  Commercial Asset Representative - NGL Assets

  Calgary, AB

  SR

  Steel Reef Infrastructure Corporation

  8+ ansCandidates need at least 8 years of midstream commercial, products marketing or related energy experience, plus a business, finance, accounting or engineering degree. Advanced Excel skills, knowledge of liquids handling agreements and settlement mechanics, and strong customer-facing experience are also required.

  Excel, Microsoft Office, Enverus

• 28j

  Electrician

  Toronto, ON

  

  fgf brands

  2+ ansCandidates need an Ontario Electrician License, at least 2 years of industrial electrician experience, and experience with retrofits and wiring systems. A valid driver's licence, English and computer skills (MS Office) are also required.

  PLC, Siemens, Allen Bradley, MS Office

• 28j

  Lead Technical Writer

  Cambridge, ON

  

  Eclipse Automation

  3+ ansCandidates need three to five or more years of technical writing experience in the nuclear industry, plus strong editing and English communication skills. Familiarity with nuclear plant operations, drawings, AutoCAD and SolidWorks is required, and a university degree, engineering technologist diploma or trades certification is the minimum education.

  Microsoft Word, AutoCAD, SolidWorks, PLC

• 28j

  Industrial Millwright - Night Shift

  Aurora, ON

  

  CP Flexible Packaging

  Candidates need a valid Ontario 433A Industrial Millwright certificate, manufacturing experience, and skill with shop machines like lathes, grinders and welders. CP Flexible Packaging looks for strong troubleshooting, teamwork and a firm commitment to safe work practices.

  lathe, grinder, welder, forklift, scissor lift, overhead crane

  28j

  Industrial Millwright - Afternoon Shift

  Aurora, ON

  

  CP Flexible Packaging

  Candidates need a valid Ontario Industrial Millwright (433A) Certificate of Qualification and experience in a manufacturing or processing environment. They must be competent with shop machines and hand tools, strong at problem solving, safety-minded, and able to communicate and work well in a team.

  lathe, grinder, welder, forklift, scissor lift, overhead crane

• 28j

  Housekeeping Manager, Toronto

  Toronto, ON

  55k–60k $/anSur placeTemps plein

  

  Equinox

  Equinox needs proven experience in a commercial or fitness setting, the ability to hire and lead staff, and knowledge of maintenance, janitorial products and OSHA standards. Candidates must hold current CPR and First Aid certification and have a legal right to work in Canada.

  Janitorial cleaning products, Hand tools, Exercise equipment

• 28j

  3rd Class Shift Engineer, Burnaby Hospital

  Burnaby, BC

  41,59 $/h

  

  Fraser Health Authority

  4+ ansCandidates need a BC 3rd Class Power Engineer certificate and four years of recent related experience or an equivalent mix of education and training. They must communicate well verbally and in writing, read blueprints, and have the physical ability to do the work.

  steam boiler, welding equipment, HVAC control system, medical gas equipment, pneumatic tube system

17 entreprises