Emplois “advanced electrical test equipment” au Canada – Page 49

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 29j

  Halton (Burlington)- 310T Truck & Coach Apprentice/Technician (Truck Mechanic)

  Burlington, ON +1

  MW

  Miller Waste System

  Candidates need a valid 310T Truck & Coach Technician licence and a G driver's licence, with a DZ licence as an asset. Hands-on experience diagnosing hydraulic and electrical faults and knowledge of the Occupational Health & Safety Act are required.

  hydraulic equipment

  29j

  310T Mechanic or Apprentice - Various Locations

  Whitby, ON +20

  MW

  Miller Waste System

  Candidates need a valid 310T Truck & Coach Technician licence or a registered 310T apprenticeship, plus a valid Class G driver's licence. Experience with hydraulic and electrical diagnostics, strong troubleshooting skills and flexibility for occasional outside-hours work are asked for.

  diagnostic equipment

• 29j

  Maintenance - Mechanic I

  Niagara Falls, ON

  CN

  Canadian Niagara Hotels Group

  2+ ansCandidates need at least 2 years of maintenance experience, a related college diploma or equivalent, and skills in diagnosing and repairing mechanical, electrical, plumbing, refrigeration and HVAC equipment. Carpentry experience, blueprint reading, WHMIS and lockout/tagout knowledge, and the ability to lift 50 lbs and climb ladders are also expected.

  Power tools, Hand tools

• 29j

  Lead Security Systems Technician

  Burnaby, BC

  KT

  Kendrix Technologies

  5+ ansCandidates need 5+ years of electronic security or low-voltage experience, experience as a senior or lead technician, and strong troubleshooting and networking skills. A valid driver's licence with a clean record is required, and working knowledge of Milestone, Genetec or Lenel is expected.

  multimeter, network tester, scanner, scissor lift, boom lift, ladder

  29j

  Project Technician (Ontario)

  Mississauga, ON

  27–37 $/h

  KT

  Kendrix Technologies

  3+ ansKendrix Technologies needs candidates with 3+ years in electronic security or low-voltage installation. They must read electrical drawings, troubleshoot devices, use power and test tools, and hold a valid driver's licence with a clean record.

  Multimeter, Network tester, Hammer drill, Grinder, Microsoft Excel

• 29j

  Lead Security Project Technician- Calgary

  Calgary, AB

  27–42 $/h

  

  Kandor Management

  3+ ansKandor Management needs candidates with 3+ years of electronic security or low-voltage experience on commercial or multi-residential sites. Candidates must read electrical and security drawings, understand security networking, use test equipment, and hold a valid driver's licence with a clean record.

  Multimeter, Network tester, Security system software

• 29j

  Night Shift Electromechanic

  Candiac, QC

  SI

  Stella-Jones Inc.

  2+ ansCandidates need a vocational diploma (DEP) in electromechanics or equivalent training, plus at least 2 years of experience in a manufacturing environment, ideally fabrication or steel. Strong troubleshooting and hands-on repair skills are essential.

  forklift, hoist, CNC machines, switchgear

  29j

  Millwright Mechanic

  Guelph, ON

  30–40 $/h

  SI

  Stella-Jones Inc.

  3+ ansCandidates need 3+ years in a similar role, troubleshooting skills and experience with hydraulics, electrical, pumps, valves, piping and pneumatic systems. A millwright licence is an asset, and the ability to lift over 50 lbs is required.

  Hand tools, Power tools, Micrometers, Calipers, Gauges, Welding equipment

• 29j

  Security Operations Analyst

  Markham, ON +2

  

  F12.net: Canadian IT Company offering: Managed IT Services, Cyber Security, Cloud Data Centre Solutions, and Technology Strategy

  3+ ansCandidates need 3+ years of experience with network topology, network security and operating systems. A bachelor's degree in computer science or engineering is preferred, and practical cybersecurity experience can replace it. Security+, CySA+, CEH or PenTest+ certifications are an asset.

  IDS/IPS, DLP, anti-spam tools

• 29j

  Mobile Unit Technician

  Pointe-aux-Trembles, QC

  33,30 $/h

  

  Camions Excellence Peterbilt: Excellence Peterbilt est une entreprise familiale créée en 1997.

  3+ ansCandidates need 3 to 5 years of heavy-duty truck or heavy equipment mechanics experience and a Class 3 driver's licence with an excellent driving record. Cummins or PACCAR engine knowledge, electrical diagnostics, computer skills, and customer service ability are assets.

  Diagnostic tools

• 29j

  Product Designer - Louvers

  Winnipeg, MB

  PI

  Price Industries Limited: After more than 60 years, Price remains a privately held family company with a deep heritage and commitment to innovation and service.

  Candidates need a Bachelor's degree in Mechanical Engineering or a Mechanical Engineering Technology diploma, plus strong SolidWorks skills. Sheet metal manufacturing and ERP or MRP experience are assets.

  SolidWorks, ERP, MRP

• 29j

  Refrigeration Operator ($41/hr)

  Hamilton, ON +5

  41 $/h

  

  Sofina Foods Inc

  Candidates need a high school diploma and a valid Refrigeration and Air Conditioning Mechanic licence (313A). They must be proficient with hand and power tools, read blueprints and use Excel, Word and Outlook.

  Mechanical hand tools, Power tools, Excel, Word, Outlook

  29j

  Refrigeration Mechanic (starting at $49/hr)

  Hamilton, ON +6

  49–52 $/h

  

  Sofina Foods Inc

  Candidates need a valid 313A Refrigeration and Air Conditioning Mechanic licence and a high school diploma. They must be proficient in refrigeration systems, welding, hand and power tools, reading blueprints, and basic computer use.

  Power tools, Hand tools, Welding equipment, Blueprints, Excel, Word

• 29j

  Electrical Designer

  Châteauguay, QC

  

  CMP Advanced Mechanical Solutions: CMP Advanced Mechanical Solutions is a Manufacturing Services company providing Electro-Mechanical Solutions that enable disruptive Technology…

  3+ ansCandidates need a Bachelor's degree in electrical engineering, at least three years as an Electrical Designer, and membership in the OIQ. Strong communication, teamwork and autonomy are expected.

  Design drawings, Assembly, Regulatory compliance, Technical support, Research, Electrical engineering

• 29j

  Signals & Communications Labourer

  Golden, BC

  Temps plein

  C

  CPKC

  Candidates need a high school diploma or equivalent, a valid driver's licence (Class 5 preferred) and availability for any shift in all weather. Electrical or electronics training is an asset, and a strong focus on safety is essential.

  Trenching equipment

• 29j

  Class 3 Casual Drivers

  Edmonton, AB

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  1+ ansCandidates need a valid Class 3 licence with air brakes and either one year of commercial truck driving experience or a CDL school certificate. They must meet GFL's safety-sensitive standards and demonstrate they can safely drive the truck and operate its equipment.

  GPS, key map, mirrors

• 29j

  Journeyperson & Apprentice Mechanics

  Saskatoon, SK

  Sur placeTemps plein

  

  G2 Enterprises Corp.

  Candidates need a certified Journeyperson Mechanic or registered Apprentice Mechanic with heavy-duty truck experience or training. They should know diesel engines, hydraulics, and electrical diagnostics, and hold a valid Saskatchewan driver's licence.

  advanced diagnostic tools, personal tools

• 29j

  Garage Door Installer Helper

  Calgary, AB

  Temps plein

  

  Overhead Door

  Candidates need at least 3 to 6 months of experience in a relevant trade or service/installation role, a valid driver's licence and clean abstract, and the ability to lift 75 pounds and work outdoors in all weather. They must also pass a background, drug, alcohol and health screening.

  hand tools, electric tools, lifts, ladders, manlift, trailer

• 29j

  Specialist Instrumentation, Control & Electrical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  Candidates need a bachelor's degree in an electrical, controls or related engineering discipline and extensive progressive experience in automation. Advanced skills in Siemens PLCs, WinCC, LabVIEW and industrial networks are required, and a nuclear security clearance must be obtainable.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware

  29j

  Senior Electrical Specialist – Technician/Technologist

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  10+ ansCandidates need a diploma in electrical, instrumentation or electromechanical technology with more than 10 years of progressive experience, or secondary school plus more than 18 years. Advanced hands-on skills with Siemens PLCs, LabVIEW and industrial networks are required, along with leadership and project management ability.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware

  29j

  Junior Instrumentation Control and Electrical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a bachelor's degree in an engineering field, P.Eng. eligibility, and at least 2 years of relevant engineering experience. Siemens PLC, HMI/SCADA and LabVIEW skills, and the ability to obtain nuclear security clearance, are required.

  Siemens TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware, Microsoft Visio

• 29j

  Principal Associate, AI Engineer

  Toronto, ON

  148k–169k $/anTemps plein

  CO

  Capital One Canada

  3+ ansCandidates need a bachelor's degree in a related field plus 3 years of AI and ML experience, or a master's plus 1 year. They also need at least 3 years of programming in Python, Go, Scala or Java. Cloud AI deployment experience and LLM optimization skills are preferred.

  AWS Ultraclusters, Hugging Face, VectorDB, NeMo Guardrails, PyTorch

• 29j

  Procurement Administrator

  Hamilton, ON

  50k–60k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Aecon needs candidates with experience in procurement administration, accounts payable or bookkeeping. Strong Microsoft Office skills, working knowledge of invoice reconciliation and three-way matching, and SAP experience are assets.

  SAP, ToolHound, Microsoft Excel, Microsoft Word, Microsoft Outlook

  29j

  Superintendent

  Hamilton, ON

  90k–110k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  10+ ansCandidates need post-secondary education in construction or civil engineering technology, or a recognized trade certification, plus at least ten years of progressive construction experience including superintendent-level field supervision. Experience with utility, civil or transit work in busy urban corridors is preferred.

  hydrovac, survey equipment

17 entreprises