Emplois “electrical panel” au Canada – Page 49

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Executive Assistant

  Kitchener, ON

  Sur placeTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  Candidates need prior administrative or executive assistant experience and strong Microsoft 365 skills, especially Outlook, PowerPoint and Excel. Strong organization, polished communication and the ability to stay calm under pressure are also required.

  Outlook, PowerPoint, Excel, Microsoft Teams, Microsoft 365

  1 mois

  MV Commissioning & Electrical Safety Manager

  Télétravail au Canada

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  Candidates need extensive experience with medium-voltage systems up to 34.5kV, hands-on experience supervising MV switching with isolation, grounding and lockout, and experience leading technical teams. They also need a strong grasp of North American electrical codes such as CSA, NEC, IEEE, NFPA and OSHA, plus a trade, diploma or degree in electrical engineering or a related field.

  SolBank, String inverters, MV skids

  1 mois

  Project Quality Engineer

  Ontario

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  3+ ansCandidates need a degree in quality, engineering, project management or a related field, plus at least 3 years in a similar role. Knowledge of inverters, transformers or lithium-ion battery products and strong cross-cultural working skills are also needed.

  Root cause analysis, Inspection, Quality assurance, Process improvement, Quality assurance procedures, Sales

  1 mois

  Controls Engineer

  Télétravail au Canada

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  3+ ansCandidates need a controls, electrical or related engineering education and at least 3 years of experience with industrial control systems in power or renewable energy. Strong knowledge of industrial protocols, networking, SCADA and communication skills are also required.

  SharePoint, SCADA, Modbus, DNP3, VPN

  1 mois

  Lead Roving Technician

  Kitchener, ON

  Sur placeTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  5+ ansCandidates need an electrical engineering or related education and at least 5 years of service experience, ideally in renewable energy. They also need knowledge of electrical codes and medium voltage systems, strong communication skills, and willingness to travel.

  CMMS, Jira

  1 mois

  Sr. Technical Solutions Engineer

  Télétravail au Canada

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  5+ ansCandidates need a bachelor's degree in electrical or power systems engineering and at least 5 years in power electronics, energy storage or microgrids. Experience with inverters, BESS, medium-voltage equipment and relevant UL, IEEE and IEC standards is strongly preferred.

  Power Conversion System, Energy Management System, medium-voltage switchgear

• 1 mois

  Legal Co-Op

  Kitchener, ON

  HybrideTemps plein

  

  Canadian Solar Inc.

  Candidates need to be a university or law student, eager to learn, self-motivated, and able to meet deadlines. Strong communication, collaboration and confidentiality skills are required.

  Corporate law, Regulatory compliance, Contract management, Renewable energy technologies, Documentation, Office administration

• 1 mois

  Supplier Quality Engineer Instrumentation & Controls

  Toronto, ON

  Temps plein

  AS

  Arabelle Solutions France

  Candidates need an engineering degree in electrical or mechanical engineering and experience in supplier quality, manufacturing or project quality. They must have audit, inspection and nonconformity experience, strong analytical skills, confident supplier communication and fluent English.

  Quality control, Inspection, Documentation, Regulatory compliance, Mechanical engineering, Analytical skills

• 1 mois

  Lead Substation Protection and Control Engineer

  Toronto, ON

  Temps plein

  LE

  LEIDOS ENGINEERING INC

  8+ ansCandidates need a bachelor's degree in electrical engineering or a related field with 8+ years of substation protection and control design experience. Strong leadership, communication, deadline management and computer skills are required, plus willingness to travel.

  engineering design software

• 1 mois

  Senior Field Technician, O&M

  Ontario

  Sur placeTemps plein

  RE

  Recurrent Energy Power Services (Canada) Inc

  2+ ansCandidates need 2-5+ years of hands-on field work, ideally in solar or wind. They need electrical and mechanical troubleshooting skills, the ability to read blueprints and schematics, a valid driver's licence and fluent English. NABCEP certification is a plus.

  CMMS, blueprints, schematics, inverters, switchgear, transformers

• 1 mois

  Stagiaire en conception électrique / Electrical Designer Intern

  Montréal, QC

  Temps plein

  CC

  CAE Canada Inc

  Inscription à un diplôme universitaire en génie électrique ou domaine connexe; 3 années ou 2 stages complétés; Connaissance des concepts d'ingénierie électrique

  E2A, SEE Electrical, Powerdraft, CAD systems, Excel

• 1 mois

  Firmware Development Engineer

  Ottawa, ON

  Temps plein

  VS

  Viavi Solutions Canada ULC

  7+ ansCandidates need 7+ years of embedded firmware experience, strong C and C++ skills for bare-metal and Linux systems, and experience with ARM or DSP processors. Experience with FPGA interfacing, serial protocols, embedded Linux and debugging tools is also required.

  JTAG, oscilloscope, logic analyzer, Git, Verilog, Xilinx Zynq

• 1 mois

  Electrical Controls Technician II

  Calgary, AB

  Sur placeTemps plein

  MC

  MiTek Canada Inc

  4+ ansCandidates need 4+ years of electrical controls experience, with PLCs, motor controllers, VFDs and servos. AutoCAD Electrical or Eplan skills are an asset, and an associate's degree in electrical or electronics engineering is preferred.

  AutoCAD Electrical, Eplan Electrical, PLC, VFD, servo drive, Microsoft Office

• 1 mois

  Industrial Electrician

  Surrey, BC

  Sur placeTemps plein

  SR

  Sunbelt Rentals of Canada

  Sunbelt Rentals needs candidates with industrial electrician experience in commercial or industrial settings and a Red Seal journeyperson certification. They also need strong PLC, VFD and electrical controls knowledge, schematic reading skills and a valid driver's licence.

  PLC, VFD, generators, switchgear, diesel engines, hand tools

• 1 mois

  Auto Body Technician (Kingsway)

  Ontario

  90k–140k $/anTemps plein

  AA

  Assured Automotive (2017) Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, welding experience (MIG and TIG), and a high school diploma plus completion of an auto body repair program. Red Seal or 310B and I-CAR registration are preferred, and a valid driver's licence is required.

  frame equipment, welding equipment

  1 mois

  Auto Body Technician (Toronto King West)

  Toronto, ON

  90k–140k $/anTemps plein

  AA

  Assured Automotive (2017) Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, a post-secondary auto body repair program, and MIG and TIG welding experience. A valid driver's licence, the ability to lift 50 lbs and a personal toolbox are also required.

  frame equipment, welding equipment

  1 mois

  Auto Body Technician (Hawkesbury)

  Hawkesbury, ON +1

  90k–140k $/anTemps plein

  AA

  Assured Automotive (2017) Inc.

  3+ ansMinimum de 3 ans d'expérience comme technicien en carrosserie; Expérience en soudage MIG et TIG; Diplôme d'études secondaires et diplôme d'un programme de réparation de carrosserie

  Équipement de redressement de châssis, Équipement de soudage MIG et TIG, Coffre à outils personnel

  1 mois

  Auto Body Technician (Barton)

  Hamilton, ON

  90k–140k $/anTemps plein

  AA

  Assured Automotive (2017) Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, welding ability (MIG and TIG), a high school diploma and completion of an auto body repair program. Red Seal or 310B and I-CAR registration are preferred, and a valid driver's licence is required.

  frame equipment, welding equipment

  1 mois

  Auto Body Technician (Burlington)

  Burlington, ON

  90k–140k $/anTemps plein

  AA

  Assured Automotive (2017) Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, MIG and TIG welding skills, a high school diploma or equivalent, and post-secondary training in auto body repair. A valid driver's licence, the ability to lift 50 lbs and a personal toolbox are required, and a Red Seal or 310B certification is preferred.

  frame equipment, welding equipment

• 1 mois

  Auto Body Technician (St. Albert)

  St. Albert, AB

  30–32 $/hTemps plein

  TB

  The Boyd Group Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, welding skills (MIG and TIG), a high school diploma and post-secondary auto body training. Red Seal or 310B and I-CAR registration are preferred.

  frame equipment, welding equipment

  1 mois

  Auto Body Apprentice - Minimum Level 1 (Watson)

  Manitoba

  17–22 $/hTemps plein

  TB

  The Boyd Group Inc.

  1+ ansCandidates need a high school diploma, post-secondary training in auto body repair, and at least 1 year of auto body technician experience. Welding skills (MIG and TIG) and a valid driver's licence are required, and the candidate must own a toolbox.

  hand tools, welding equipment

  1 mois

  Auto Body Apprentice - Min Level 2 (Winnipeg Area)

  Winnipeg, MB

  19–24 $/hTemps plein

  TB

  The Boyd Group Inc.

  1+ ansCandidates need a high school diploma or equivalent, completion of an auto body repair program, and at least 1 year of auto body technician experience. MIG and TIG welding experience is required, and the apprentice must lift about 50 lbs and own a toolbox.

  welding equipment, hand tools

  1 mois

  Auto Body Technician (Watson)

  Manitoba

  25–33 $/hTemps plein

  TB

  The Boyd Group Inc.

  3+ ansBoyd Autobody & Glass needs candidates with at least 3 years of auto body technician experience, MIG and TIG welding skills, a high school diploma and completion of an auto body repair program. Red Seal and I-Car Registered status are preferred, and candidates must hold a valid driver's licence, own a toolbox and be able to lift up to 50 lbs.

  frame equipment, welding equipment, toolbox

  1 mois

  Auto Body Technician (King Edward)

  King Edward, MB

  25–33 $/hTemps plein

  TB

  The Boyd Group Inc.

  3+ ansCandidates need at least 3 years of auto body technician experience, MIG and TIG welding experience, and a high school diploma plus completion of an auto body repair program. Red Seal or 310B and I-Car registration are preferred, and a valid driver's licence is required.

  frame equipment, welding equipment, toolbox

11 entreprises