Emplois “fabrication tools” au Canada – Page 49

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 15j

  Layout and Design Engineer - SNSPDs (Superconducting Nanowire Single Photon Detectors)

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need an MSc or PhD in engineering, science or a related field with 2+ years of industrial experience. Expert skill in scripted photonic mask layout (gdsfactory, ipkiss3, Virtuoso or similar), DRC/LVS physical verification and GDSII/OAS output, plus Python, Git and strong collaboration skills are required.

  gdsfactory, ipkiss3, Virtuoso, OptoDesigner, Git, COMSOL

  15j

  Process Integration Engineer

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  5+ ansCandidates need a PhD in physics, materials science, electrical engineering or a related field, plus hands-on thin-film lithium niobate fabrication experience. Strong data analysis, metrology and failure analysis skills and good teamwork are also required.

  SEM, TEM, AFM, Ellipsometry, XRR/XRD, SIMS

• 15j

  Welder/Fabricator

  Kingston, ON

  21,80–30 $/hTemps plein

  H

  Haakon

  1+ ansCandidates need at least one year of fabrication, construction or welding experience (preferred), mechanical aptitude, and the ability to read drawings and measurements. Strong attention to detail, physical stamina, teamwork and reliable transportation are also required.

  MIG welding equipment, air hand tools, electric hand tools, measuring tools, blueprints

• 15j

  Driver Reclaim

  Moncton, NB

  TélétravailTemps plein

  W

  WM

  2+ ansCandidates need at least two years of driving experience, preferably with trucks of at least 3 tons and route management. They need a valid driver's licence, a medical card from a certified examiner, and a G licence with one year of experience with a 5-ton or box truck.

  box truck, handheld scanning device, route sheets

• 15j

  Quality Coordinator

  Burlington, ON

  Temps plein

  

  Alberici Canada

  2+ ansCandidates need 2+ years in construction quality control, quality assurance or site supervision, and the ability to read architectural, structural and civil drawings. Knowledge of building codes and standards, attention to detail and proficiency in Microsoft Office and Bluebeam are required.

  Bluebeam, Microsoft Office

• 15j

  Mechanical Assembly

  Kitchener, ON

  20–22 $/hContrat

  

  Randstad Canada

  Candidates need prior manufacturing, fabrication or shop assembly experience, comfort with hand and power tools, and mechanical aptitude. They must be able to lift up to 50 lbs, work on their feet, and have reliable transportation to the Kitchener facility.

  Drills, Impact drivers, Torque wrenches, Rivet guns, Saws

  15j

  CNC Operator

  Guelph, ON

  23 $/hContrat

  

  Randstad Canada

  Candidates need proven experience running CNC milling equipment in a machine shop, working knowledge of Fanuc controls, and flexibility to work any rotating shift. They must be able to stand all shift and lift 40 to 50 lbs, and hold a high school diploma, OSSD or technical training in machining.

  Fanuc CNC control, CNC vertical mill, CNC horizontal mill, micrometer, vernier calipers, depth gauge

• 15j

  Creative Engineer, Stripe Creative Lab

  Télétravail au Canada

  Télétravail

  

  Stripe: Headquartered in San Francisco and Dublin, the company aims to increase the GDP of the internet.

  6+ ansCandidates need 6+ years of software engineering or creative development experience, deep expertise in one area of creative engineering, and a portfolio of experimental interactive work. Strong frontend fundamentals and the ability to solve unfamiliar problems independently are required.

  WebGL, WebGPU, Three.js, Raspberry Pi, Arduino

• 15j

  Regional Operations Manager, Cleaning Services

  Calgary, AB +1

  Temps partiel

  

  BGIS

  3+ ans3+ gestionCandidates need 3+ years of management experience in a service-related operations field, a valid driver's licence and own vehicle, strong English written and oral skills, and availability for evenings, weekends and on-call work.

  Microsoft Office, cleaning equipment

• 15j

  Mechanical Research & Development Team Leader

  Ottawa, ON

  RC

  Royal Canadian Mounted Police - Technical Operations

  3+ ansCandidates need an engineering degree or professional engineer eligibility, at least three years of mechanical project and design experience, and two or more years of technical advice and partnership work. Recent budgeting and supervisory experience and bilingual proficiency are also required.

  CAD

• 15j

  Construction Manager

  Hamilton, ON

  

  E.S. FOX LIMITED

  5+ ansE.S. Fox Limited needs candidates with 5 to 10 years of senior project execution experience, a bachelor's degree or equivalent experience, and strong construction knowledge. Candidates also need proven leadership of cross-functional teams, experience managing under union agreements, and clear written and spoken communication.

  Microsoft Office

  15j

  Project Coordinator

  Hamilton, ON

  

  E.S. FOX LIMITED

  3+ ansCandidates need at least three years of construction industry experience, with site experience preferred. A C.E.T. designation or engineering technology education is strongly preferred, and candidates need strong organizational, communication and problem-solving skills.

  MS Project, Primavera

• 15j

  Shipper Receiver

  Saskatoon, SK

  Temps plein

  

  INFRAPIPES: Infra Pipes is a leading North American manufacturer of medium- and high-density polyethylene (MDPE and HDPE) pipeline solutions for essential…

  3+ ansCandidates need 3 to 5 years of manufacturing or production experience, proven forklift experience with heavy equipment, and a valid driver's licence with a clean driving record. Strong mechanical aptitude, teamwork skills and familiarity with Lean and 5S practices are also expected.

  forklift, crane, hand tools, power tools, MS Office, flatbed trucks

• 15j

  Millwright

  Woodstock, ON

  Temps plein

  

  OSCO

  4+ ansCandidates need a licensed journeyman or class 433A certification, or a four-year apprenticeship or four years of direct millwright experience, plus a valid G driver's licence. Strong diagnostic, welding, communication and supervisory skills are needed.

  Hoists, Lift trucks, Lathe, Hand tools, Power tools, Micrometers

• 15j

  Quality Control Inspector - Incoming Products

  Calgary, AB

  Temps plein

  F

  Foremost

  Candidates need a technical diploma in engineering technology or related experience, though recent graduates are encouraged to apply. Attention to detail, basic drawing interpretation, mechanical aptitude and good computer and communication skills are important, and manufacturing or inspection experience is an asset.

  1 Factory, Measuring tools

• 15j

  Production Manager - ACX AutoLux

  Montréal, QC

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Expérience comme gestionnaire de carrosserie, gestionnaire de production ou estimateur; Expérience en leadership et en gestion d'équipe; Connaissance des activités des centres de collision et de la budgétisation

  SharePoint, système de gestion des véhicules

  15j

  Autobody Repair Technician - ACX AutoLux

  Montréal, QC

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Formation postsecondaire pertinente ou formation connexe; Connaissance des processus de réparation des fabricants; Permis de conduire valide et bon dossier de conduite

  Pistolets pulvérisateurs de peinture, Ponceuses électriques

• 15j

  Lead Power Platform Solutions Engineer

  Ontario

  TélétravailTemps plein

  C1

  Company 1 - The Manufacturers Life Insurance Company

  10+ ansCandidates need at least 10 years as a cloud developer, 5 years of pro-code Power Platform / Dynamics 365 development, and 5 years as a solutions architect or lead engineer. Expert knowledge of Dataverse, Power Apps, Power Automate and Azure services is required.

  Power Apps, Power Automate, Dataverse, Copilot Studio, Power Pages, Power BI

• 15j

  Millwright

  Woodstock, ON

  Temps plein

  EW

  Enterprise Wide

  4+ ansCandidates need a licensed journeyman or Class 433A certification, or a four-year apprenticeship or four years of direct millwright experience. They must read blueprints, weld, detect machinery faults, lift up to 100 lbs and work in hot and cold conditions.

  Hoists, Lift trucks, Micrometers, Jacks, Lathe, Hand tools

• 15j

  Shop QA/QC

  Calgary, AB

  Sur placeTemps plein

  AG

  Alstar Group: Alstar specializes in facility construction, prefabrication, field installation and facility construction.

  2+ ansCandidates need CWB Level 1 certification, 2+ years of quality control experience, and a Common Safety Orientation ticket. A solid understanding of ASME and CSA codes and a strong commitment to safety are also required.

  Welding inspection equipment, Pressure test equipment

• 15j

  Agentic AI Architect

  Télétravail au Canada

  Télétravail

  

  Tiger Analytics Inc.

  5+ ansCandidates need 5+ years of cloud architecture experience on Azure, AWS or GCP and 2+ years building LLM applications. They also need strong Python skills, hands-on experience with agent frameworks, and the ability to explain AI concepts to non-technical leaders.

  Azure OpenAI, AWS Bedrock, Vertex AI, Pinecone, Milvus, Azure AI Search

  15j

  Agentic AI Architect

  Télétravail au Canada

  Télétravail

  

  Tiger Analytics Inc.

  5+ ansCandidates need 5+ years architecting cloud solutions on Azure, AWS, or GCP and 2+ years working with LLMs and agent systems. Hands-on skill with agent frameworks, strong Python, and vector database experience are required.

  Azure OpenAI, AWS Bedrock, Vertex AI, Pinecone, Milvus, NeMo Guardrails

• 15j

  Technician I

  Saint-Mathieu-de-Rioux, QC

  

  Vestas

  Vestas needs candidates who are physically fit, comfortable working at heights, and able to follow detailed procedures and safety protocols. A high school diploma, a valid driver's licence, English ability and legal work authorization in Canada without sponsorship are required.

  Outils mécaniques, Équipement de protection individuelle

• 15j

  CNC Turret Punch Press Operator

  Port Coquitlam, BC

  22–25 $/hTemps plein

  

  Wesgar Inc.

  1+ ansCandidates need at least one year of hands-on CNC turret punch press experience on machines such as TRUMPF, Finn-Power or Amada, plus blueprint reading and first-off inspection skills. They must be legally entitled to work in Canada.

  CNC turret punch press, TRUMPF, Finn-Power, Amada

19 entreprises