Emplois “Sensors and actuators” au Canada – Page 5

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Apprentice Electrician

  Edmonton, AB

  Temps plein

  AI

  Ainsworth Inc

  Candidates need to be indentured apprentices in Alberta (years 1 to 4) with conduit experience, plus knowledge of electrical theory and the ability to read sketches. They also need strong English, attention to detail, a Class 5 licence with a clean driver's abstract, and a high school diploma or GED.

  Building automation, Control systems, Working at heights, Circuit diagrams, Maintain equipment, Troubleshoot

  1 mois

  Apprentice Electrician (1st - 3rd Year) - Lethbridge

  Lethbridge, AB

  Temps plein

  AI

  Ainsworth Inc

  Candidates need an Alberta indentured electrical apprenticeship (1st to 3rd year) with conduit experience, strong troubleshooting and attention to detail, and experience with low-voltage work. A Class 5 licence with a clean driver's abstract and living in the Lethbridge area are required.

  VFD, building automation controls

• 1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  Candidates need a diploma or degree in electrical, electronics, mechanical or a related field. They need hands-on experience with sensors, data acquisition, bench test tools and data analysis, and programming in Python or C/C++.

  oscilloscope, power analyzer, logic analyzer, multimeter, DAQ, SolidWorks

  1 mois

  Test Specialist - PCL

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  3+ ansCandidates need a bachelor's degree in mechanical engineering or a related field, at least 3 years of engineering testing experience, and SolidWorks design skills. Hands-on experience with instrumentation, DAQs, sensors and bench diagnostic tools is also required.

  SolidWorks, DAQ, oscilloscope, power analyzer, logic analyzer, multimeter

• 1 mois

  Staff Vehicle Program Manager

  Toronto, ON

  TélétravailTemps plein

  

  Waabi

  8+ ans3+ gestionCandidates need 8+ years of engineering experience in vehicle development, autonomous vehicles, ADAS or robotics, including 3+ years leading technical integration programs. They also need an engineering bachelor's degree, strong problem-solving with dependency and critical-path analysis, and clear communication.

  Jira

• 1 mois

  Electrical Engineering Lead

  Hamilton, ON

  LE

  Lincoln Electric: For more information about Lincoln Electric and its products and services, visit the Company's website at http://www.lincolnelectric.com.

  5+ ansCandidates need a bachelor's degree in electrical, automation or mechatronics engineering and at least 5 years of industrial automation experience. Strong PLC programming, electrical code knowledge, AutoCAD Electrical skills and experience leading technical work are required.

  AutoCAD Electrical, PLC, Ethernet/IP, Microsoft 365

• 1 mois

  Robotics Engineer - Motion Planning & Controls

  Burnaby, BC

  Temps plein

  

  Red Rabbit Robotics

  Candidates need strong C++ or Rust skills, a solid grounding in control theory, kinematics and dynamics, and a proven record of shipping robotics code. Hands-on experience with electrical and mechanical systems and real-time embedded software is also required.

  ROS, ROS2, Gazebo, NVIDIA Isaac Sim, LiDAR, IMU

• 1 mois

  Building Automation System Specialist

  Kelowna, BC

  Temps plein

  

  Interior Health Authority

  5+ ansCandidates need at least five years of building automation or controls experience, including BAS design, programming and commissioning. A relevant engineering degree or diploma and a PEng or AScT registration are also required.

  BAS software, MS Excel, MS Word, MS PowerPoint

• 1 mois

  Professional, Electrical/Electronic Engineering, Cabin innovation

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  10+ ansCandidates need a university degree in Aerospace or Electrical Engineering and over 10 years of engineering experience in business aircraft interiors and systems. They should understand mechanical-electrical integration, certification rules, and manufacturing, and be able to work with minimal supervision.

  CATIA, NX

  1 mois

  Technical Expert, Engineering for Stability & Control

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  12+ ansCandidates need a bachelor's, master's or PhD in Aerospace Engineering and at least 12 years of aircraft stability and control experience. Strong flight dynamics and aerodynamics knowledge, programming skills and good written and oral communication are also needed.

  MATLAB, Simulink, MS Word, MS Excel, MS PowerPoint, Windows

• 1 mois

  Senior Mechanical Engineer

  Kingston, ON

  Sur placeTemps plein

  ES

  EIDCA Specialty Products Company

  10+ ansQnity needs candidates with an M.Sc. in Mechanical Engineering and 10+ years of industrial experience, including strong SolidWorks/CAD skills. Candidates should have root cause analysis and reliability experience and the ability to lead complex projects across teams.

  SolidWorks

• 1 mois

  Senior Mechanical Engineer

  Kingston, ON

  80k–126k $/an

  

  Qnity: Qnity is a premier technology provider across the semiconductor value chain, empowering AI, high performance computing, and advanced connectivity.

  10+ ansCandidates need an M.Sc. in Mechanical Engineering and 10+ years of industrial experience, with strong SolidWorks/CAD skills and root cause analysis experience. Strong project management, communication and multidisciplinary leadership abilities are also required.

  SolidWorks, CAD

• 1 mois

  Field Engineer - Sudbury

  Greater Sudbury, ON

  Temps plein

  

  Régulvar: Founded in 1974, Regulvar is a private company operating nationally.

  Régulvar needs candidates with a degree in mechanical or electrical engineering or a related field. They need knowledge of building systems, PLCs, DDC controllers, electronics and programming in BASIC or C++, plus a valid driver's licence and availability to travel within Ontario.

  Delta digital control systems, PLC, DDC controllers

• 1 mois

  Aircraft Systems Integrator

  Montréal, QC +1

  Sur placeTemps plein

  

  Dominion Dynamics

  Candidates need a degree in electrical, aerospace, systems or mechatronics engineering, or equivalent. They should have proven systems integration experience, hands-on interface definition work, experience designing test rigs, and troubleshooting skills on electrical power and communication buses. Experience supporting live ground or flight tests is required.

  CAN bus, Ethernet, RS-422

• 1 mois

  Electrical Maintenance Supervisor

  Sault Ste. Marie, ON

  93k–129k $/an

  T

  Tenaris: TenarisUniversity, Tenaris’s corporate university, offers high-quality, job-specific curricula and development plans that help them succeed in the…

  5+ ansTenaris needs candidates with industrial maintenance or hands-on technical experience and 5+ years in manufacturing. Electrical trade or engineering education is preferred, along with the ability to read mechanical and electrical drawings.

  PLC, VFD, SAP PM

• 1 mois

  Guidance, Navigation & Control (GNC) Systems Engineer | Remote Opportunity | Fastwater Staffing

  Sainte-Anne-de-Bellevue, QC

  TélétravailTemps plein

  H

  HIKINEX: Hikinex is a company that provides scalable business support.

  10+ ansCandidates need a bachelor's degree in electrical or aerospace engineering, physics or a related field, and ideally 10+ years of GNC/AOCS experience. They must know orbital mechanics, attitude dynamics, control-law design and embedded real-time filtering, and be fluent in English and French.

  MATLAB, Simulink, STK, Confluence, JIRA

  1 mois

  Guidance, Navigation & Control (GNC) Systems Engineer for Fastwater Staffing and Recruiting

  Sainte-Anne-de-Bellevue, QC

  Contrat

  H

  HIKINEX: Hikinex is a company that provides scalable business support.

  10+ ansCandidates need a B.Sc. in electrical engineering, aerospace or physics (M.Sc. preferred) and 10+ years of GNC/AOCS experience on satellites. They also need strong control-law, navigation sensor, embedded filtering and systems engineering skills, plus bilingual English and French communication.

  Matlab, Simulink, STK, Confluence, JIRA, PLM

  1 mois

  (Fastwater Staffing) Guidance, Navigation & Control (GNC) Systems Engineer - Montreal, Canada [Full Relocation Package]

  Quebec

  Contrat

  H

  HIKINEX: Hikinex is a company that provides scalable business support.

  10+ ansCandidates need a B.Sc. in electrical engineering, aerospace or physics, with 10+ years of GNC/AOCS experience on LEO, MEO or GEO platforms. Strong skills in orbital mechanics, control design, sensors, actuators and embedded real-time algorithms are required, plus fluent English and French.

  Matlab, Simulink, STK, Confluence, JIRA, PLM

• 1 mois

  Industrial Automation and CSV Engineer - Ontario, Canada

  Cambridge, ON

  Temps plein

  

  VTI Life Sciences: VTI is a consulting firm specializing in automation and CQV services to biotech, pharmaceutical, and med device clients.

  6+ ansCandidates need at least six years of work with PLC and SCADA automation equipment, plus regulated manufacturing experience. They must have hands-on experience with Rockwell, FactoryTalk View and FAT/SAT/IQ/OQ/TMV protocols, and must be able to work onsite in Cambridge.

  Rockwell Automation, FactoryTalk View, Ignition, PLC, SCADA

• 1 mois

  Manufacturing Technician

  Oakville, ON

  Temps plein

  

  Gastronomous Technologies Inc.

  Candidates need hands-on experience in food-grade or automated equipment manufacturing, robotic or electromechanical assembly, and stainless steel and sheet metal fabrication. They must read mechanical drawings and BOMs and understand food safety standards, lockout/tagout and machine guarding.

  Welding equipment, Mechanical drawings, Bill of materials

  1 mois

  Assembly Technician

  Oakville, ON

  55k–65k $/anTemps plein

  

  Gastronomous Technologies Inc.

  2+ ansCandidates need 2 to 4 years of hands-on mechanical or electromechanical assembly experience, the ability to read assembly drawings, and experience with basic fabrication such as grinding or light welding. Food-grade or automated equipment experience and comfort working independently are also needed.

  hand tools, power tools, press brake, CNC, manual mills, lathes

• 1 mois

  Guidance, Navigation & Control (GNC) Systems Engineer

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  10+ ansCandidates need a Master's (preferred) or Bachelor's in electrical engineering, aerospace or physics, with 10+ years of GNC/AOCS experience on LEO, MEO or GEO platforms. Strong skills in orbital mechanics, control-law design, navigation sensors, embedded real-time filtering and aerospace systems engineering are required.

  MATLAB, Simulink, STK, Confluence, JIRA

  1 mois

  AI&T Manager

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  7+ ansCandidates need an engineering or industrial degree, 7 years of program or project management and 7 years of assembly, integration or test experience. They must also have negotiation, risk and contract experience, strong leadership skills, and be fluent in French and English.

  ITAR, Controlled Goods Program, Electric motors, Servo systems

• 1 mois

  Building Automation Systems (BAS) Technician

  Toronto, ON

  63k–79k $/anTemps plein

  

  BGIS

  7+ ansCandidates need a technician diploma or engineering degree in a related field, at least 7 years of related experience and Tridium Niagara AX or N4 certification. Extensive knowledge of BAS installations, system integration and network wiring standards is required.

  Tridium Niagara, BAS programming software

17 entreprises