Emplois “Mechanical locks” au Canada – Page 6

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 15j

  Senior Photonic Engineer - Experimentalist

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  Candidates need an M.Sc. or Ph.D. in quantum optics, photonics, AMO or electrical engineering, plus lab research experience. Xanadu asks for hands-on optical and RF lab skills, Python for data acquisition and analysis, and the ability to build mathematical models of physical systems.

  oscilloscope, signal generator, spectrum analyzer, photodiodes, Python

  15j

  Senior Scientist - Precision Measurements (Optical Metrology)

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need a PhD in physics or engineering plus at least 2 years of postdoctoral or industry experience. They need a proven record in high-precision measurement or detector calibration, familiarity with fiber-coupled optics, and strong communication skills.

  Optical Spectrum Analyzer, Polarization controllers, DFB lasers, Mode-locked lasers, Optical modulators, Zemax

  15j

  Photonics Engineer - Experimentalist

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansXanadu needs candidates with a PhD in AMO, quantum optics, photonics or nonlinear optics. They should have hands-on optical lab experience, knowledge of phase-locking and high-speed modulators, and skill with Python or MATLAB.

  oscilloscope, signal generator, spectrum analyzer, Python, MATLAB, IQ modulator

  15j

  Lead Engineer - Laser Systems

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  10+ ansCandidates need 10+ years in high-performance photonics, including semiconductor lasers, optical amplifiers and EO modulators. They also need experience with laser stabilization, noise control (RIN and phase noise), vendor management and new product introduction.

  laser stabilization electronics, photonic integrated circuit test systems

• 15j

  General Mechanic (Full-Time)

  Ottawa, ON

  41 $/hSur placeTemps plein

  

  AccorHotel

  7+ ansCandidates need a licensed journeyman mechanic with at least 7 years in the trade and technical school training. They should know HVAC, welding (MIG, TIG, stick, gas) and OSHA safety, and be able to work with guests and colleagues.

  welding equipment, pump tools, HVAC equipment, shop tools, Word, Excel

• 15j

  Process Operator

  Dartmouth, NS

  23 $/hSur placeTemps plein

  AA

  A-Gas Americas Canada

  A-Gas Americas Canada needs candidates with a high school diploma or GED, strong math skills, basic mechanical aptitude, and hands-on experience with pumps, hoses, compressors, preventive maintenance and lockout/tagout. Manufacturing or chemical industry experience, Microsoft Office skills and gas chromatography knowledge are also sought.

  Distillation tower, Gas chromatograph, Compressors, Pumps, Hoses, Yard truck

• 15j

  Maintenance Scheduler

  Trenton, ON

  Contrat

  

  Kruger Inc.: In addition to its traditional industry sectors where the Company built a solid reputation worldwide, namely pulp and paper, paperboard and…

  3+ ansCandidates need a college diploma in maintenance, mechanical or engineering technology, or a recognized trade certification, plus 3+ years of maintenance planning in manufacturing. They must know SAP or a maintenance management system, preventive maintenance, lockout/tagout and work permits, and be strong at running meetings with maintenance and operations leaders.

  SAP, Excel, Workforce management software

• 16j

  *HIRING BONUS* Licensed Aircraft Maintenance Engineer- Avionics

  Hamilton, ON

  38,03–45,65 $/h

  

  KF Aerospace

  2+ ansCandidates need a Transport Canada E licence, at least 2 years of experience, and a thorough knowledge of aircraft systems and Transport Canada regulations. Strong attention to detail, safety discipline and the ability to train and lead a crew are also required.

  test equipment, ground support equipment

  16j

  *HIRING BONUS* Licensed Aircraft Maintenance Engineer- Mechanics

  Hamilton, ON

  38,03–45,65 $/h

  

  KF Aerospace

  2+ ansCandidates need an AME-M license, a ground operating license and a radio license, with up to 2 years of experience. KF Aerospace also asks for strong attention to detail, teamwork, good communication and a willingness to pursue type endorsements.

  ground support equipment, test equipment, Intranet

• 16j

  Maintenance Electrician

  Gravenhurst, ON

  35–38 $/hTemps plein

  

  Orbia: Orbia is a company driven by a shared purpose: to advance life around the world.

  Candidates need a Journeyman Electrician Certification, a valid Class G driver's licence, and knowledge of electrical schematics and the Electrical Code. Industrial production or mechanical maintenance experience is an asset, along with working knowledge of OHS, lockout/tagout and arc flash safety.

  multimeter, clamp meter, insulation resistance tester, PLC, VFD, Microsoft Excel

• 16j

  Lead Maintenance Technician (ON)

  Toronto, ON

  

  Concert Properties LTD.

  Candidates need a varied technical skill set, strong time management and the ability to work under pressure.

  Programmable thermostats, Emergency generator

  16j

  Lead Maintenance Technician (ON)

  Toronto, ON

  

  Concert Properties LTD.

  Candidates need a varied technical skill set, strong time management and the ability to work under pressure.

  Programmable thermostats, Emergency generator

  19j

  Maintenance Technician

  Vancouver, BC

  

  Concert Properties LTD.

  3+ ansCandidates need 3+ years in residential building maintenance with practical plumbing, electrical, drywall and hardware skills. They also need knowledge of building mechanical systems, basic BAS/DDC knowledge, strong customer service skills and a valid BC driver's licence.

  SuiteSpot, BAS/DDC systems, CCTV systems, Security access systems

• 16j

  Machine Operator (Day Shift)

  Crossfield, AB

  26,50 $/hSur placeTemps plein

  

  Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

  Candidates need a high school diploma or GED (preferred), to be at least 18, and a strong work ethic with attention to detail. Prior manufacturing experience is preferred, along with basic math, computer and measuring skills.

  calculator, measuring devices, hand tools, computer

  19j

  Machine Operator (Evening Shift)

  Crossfield, AB

  26,50 $/hSur placeTemps plein

  

  Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

  Carlisle needs candidates who are at least 18, with a high school diploma or GED preferred and prior manufacturing experience preferred. Candidates should work safely, with attention to detail, basic math and computer skills, and the ability to use measuring devices and learn new equipment.

  Calculator, Measuring devices (gauges, tapes, rulers), Hand tools, Computer, Heavy stationary machinery

  19j

  Machine Operator (Evening Shift)

  Crossfield, AB

  26,50 $/hSur placeTemps plein

  

  Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

  Candidates need a strong work ethic, attention to detail, and safe working habits. Basic computer, math and measuring skills are needed, and prior manufacturing experience is preferred.

  Calculator, Measuring devices, Hand tools, Computer

• 19j

  Building Superintendent (Live-In)

  London, ON

  OO

  OLD OAK PROPERTIES

  1+ ansCandidates need one year of experience as a building manager, building supervisor, on-call cleaner or similar role with on-call duties. They must be detail-oriented, familiar with building systems, able to lift 50 lbs, and pass a police clearance check.

  lift equipment

• 19j

  Building Operator

  Surrey, BC

  Sur placeTemps plein

  CA

  CAN ASC-Jones Lang LaSalle Real Estate Services, Inc. Markets

  2+ ansCandidates need a 5th Class Power Engineer certification or be working towards it, plus at least 2 years as an operator. They must troubleshoot building systems, be physically fit, use Word, Excel and BMS systems, be available for call-in work, and hold a valid driver's licence.

  BMS

• 19j

  Operations Supervisor

  Ottawa, ON

  70k–80k $/an

  ?

  5+ ansThe Operations Supervisor reports to the Operations Manager and has a primary focus on enhancing the operating efficiency of the assigned property and demonstrates a strong knowledge of…; Assist with industry standard…

  HVAC, Plumbing, Communication skills, Cleaning, Health and safety, WHMIS

• 19j

  Building Operator

  Toronto, ON

  55k–65k $/an

  ?

  1+ ansProvide, as required to maintain the building at CPMI’s standards, general maintenance duties including housekeeping; i.e., sweeping, litter pick up, timely snow removal, coil cleaning,…; Perform daily inspections of…

  Mechanical systems, Health and safety, Regulatory compliance, WHMIS, Handling of dangerous goods, Cleaning

• 19j

  2nd Class Power Engineer

  Taber, AB

  

  Lantic Inc.: is a proudly Canadian-owned company specializing in sugar and natural sweetener solutions.

  Lantic Inc. needs candidates with a valid 2nd Class Steam Ticket in Alberta and hands-on mechanical skill. Candidates should know safety rules such as Lock Out-Tag Out, WHMIS, TDG and OH&S, and be ready to work rotating shifts.

  power boiler, backpressure turbine, water treatment equipment

• 19j

  Packaging Technician

  Grand Falls, NB

  Temps plein

  

  McCain Foods

  McCain Foods needs a licensed Industrial Mechanic or Industrial Electrician willing to take an apprenticeship for a second trade. Candidates should have a good safety record, work well alone and in teams, and be comfortable with SAP, MDIxAI Maintenance Hub and MS Office.

  SAP, MDIxAI Maintenance Hub, MS Office, packaging equipment, palletizing equipment, Tray Pack equipment

• 19j

  Site Superintendent

  Calgary, AB

  FL

  FCMI LE

  5+ ansCandidates need at least 5 years as a site superintendent on tenant improvement or commercial interior projects, knowledge of mechanical, electrical, plumbing and finishing systems, and the ability to read blueprints. A journeyperson certificate is an asset, and candidates must follow OHS regulations.

  blueprints, shop drawings, hand tools, power tools

  19j

  Site Superintendent

  Edmonton, AB

  FL

  FCMI LE

  5+ ansCandidates need at least 5 years as a Site Superintendent with a general contractor, ideally on tenant improvement or commercial interior work. They need knowledge of mechanical, electrical, plumbing and finishing systems, OHS knowledge, the ability to read drawings, and a valid driver's licence with their own vehicle.

  Power tools, Hand tools, Blueprints, Shop drawings

14 entreprises