Emplois “OEM manuals” au Canada – Page 6

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Aircraft Mechanics Technician - Calgary (72404)

  Calgary, AB

  GA

  GAL AeroStaff

  2+ ansCandidates need a diploma in aircraft maintenance or equivalent and 2-3 years of aircraft maintenance experience in a production or MRO setting. They must read blueprints and technical manuals, troubleshoot well, and work safely in a regulated environment.

  precision instruments, specialized tools

  26j

  QA Manager

  Windsor, ON

  GA

  GAL AeroStaff

  5+ ansGAL AeroStaff needs candidates with a College Diploma, an AME M2 licence and a formal Quality Assurance Lead Auditor credential (IOSA preferred). Candidates need at least 5 years of related experience, supervisory experience in aircraft maintenance and strong knowledge of airworthiness regulations.

  APRISe, MS Word, MS Excel, MS Outlook

  26j

  Aircraft Assembler Calgary (93200)

  Calgary, AB

  GA

  GAL AeroStaff

  3+ ansCandidates need a college diploma or vocational training in aircraft assembly or a related field, plus 3 to 5 years of aircraft structural assembly experience. They must read blueprints well, work with precision tools and understand aluminum, composite and titanium materials.

  pneumatic tools, precision measuring instruments, assembly jigs, fixtures, alignment tools

• 26j

  Autobody Technician

  Meadow Lake, SK

  Temps plein

  M

  Mobility

  Candidates need journeyperson status (apprentices are considered), the ability to read repair estimates and OEM procedures, experience with welding, frame machines and measuring systems, a valid driver's licence and good physical ability.

  frame machine, measuring systems, diagnostic tools, computerized measuring systems

• 26j

  Maintenance Technician - Afternoon Shift

  Whitchurch-Stouffville, ON

  Temps plein

  

  Teva Pharmaceutical

  3+ ansCandidates need a high school diploma and at least 3 years of mechanical or electromechanical maintenance experience. They also need a millwright or electrician certification or equivalent trade credential, plus CMMS and PLC knowledge.

  CMMS, PLC, mills, lathes, calibration equipment, diagnostic devices

• 26j

  Detailer - ACX Windsor

  Windsor, ON

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Candidates need a high school diploma or GED, a valid driver's licence with a clean record, and the ability to drive automatic and manual vehicles. They must be physically fit for heavy lifting and long periods standing, and be detail-oriented and customer-focused.

  power washer, hand-held power tools, vacuum, cleaning products

  28j

  Detailer - ACX Ridge Meadows

  Maple Ridge, BC

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Candidates need a high school diploma or GED, a valid driver's licence with a clean driving record, and the ability to drive automatic and manual vehicles. AutoCanada Inc. also wants strong attention to detail, good customer service and the ability to handle heavy lifting and long periods of standing.

  Power washer, Hand-held detailing tools, Vacuum

• 26j

  System Engineer - Balance of Plant

  Oakville, ON

  Sur placeTemps plein

  

  Atura Power: Atura Power is an energy company that plays a vital role in supplying and balancing Ontario's electricity system.

  8+ ansAtura Power needs a Mechanical Engineering degree, a P.Eng., and at least 8 years of progressive power plant design and maintenance experience. Strong technical writing, drawing interpretation, knowledge of Ontario codes and standards, and the ability to travel up to about 30 consecutive days are also required.

  IBM Maximo, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 26j

  Machinist - 5 & 6 Axis

  St. Thomas, ON

  38,95–45,10 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansCandidates need a high school diploma and 2 to 3 years of experience setting up and operating 5-axis CNC machines. They must read blueprints and CNC programs, and understand machine calibration, tool selection and complex datum structures.

  5-axis CNC machine, CNC program, precision measuring instruments

  27j

  Quality Inspector

  Woodstock, ON +1

  25–28,84 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansCandidates need at least 2 years of quality-related experience, including quality auditing and work to CSA N299, ASME Section VIII and IX, and CWB or AWS weld inspection standards. A post-secondary degree in science or engineering, or equivalent experience and certification, is required.

  CMM, gauges, Microsoft Excel, Microsoft Word, Microsoft Outlook, shipping and receiving software

  28j

  Director of Engineering

  Stratford, ON +2

  160k–180k $/anTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  12+ ans5+ gestionArrow needs a Professional Engineer licensed in Ontario with a mechanical engineering degree and 12+ years in metal fabrication and pressure equipment engineering. Candidates also need 5+ years leading engineering teams and experience with ASME nuclear code work and quality systems.

  CAD, code calculation software, ERP system, quality management system, document management system

  28j

  Machinist- Tool Room

  Guelph, ON

  27,41–35,69 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansCandidates need a machinist or tool and die maker licence and 2 to 5 years of custom machining experience. They must read blueprints well, operate and program 3 and 5 axis CNC machines, and know G-code and M-code.

  CNC machines, Lathe, Micrometer, Vernier, Calliper, Height gauge

• 27j

  Manager, Technical Training, Support & Apprentice Program

  Vancouver, BC

  165k $/anTemps plein

  

  Coast Mountain Bus Company Ltd: As the largest operating company in the integrated TransLink enterprise, Coast Mountain Bus Company (CMBC) operates more than 96 per cent of the…

  Candidates need a degree in a relevant field such as Education, Engineering, Business, Technology or Organizational Development, plus experience leading technical training or maintenance teams. Strong knowledge of fleet maintenance, zero-emission vehicles and apprenticeship requirements is expected.

  Learning Management System (LMS)

• 27j

  Millwright

  Nisku, AB

  40 $/hContrat

  

  Randstad Canada

  Randstad Canada needs a valid Alberta Journeyperson Millwright ticket or Red Seal certification, solid experience overhauling heavy rotating machinery and gearboxes, and hydraulics troubleshooting skills. Candidates also need clear English communication and the ability to start on short notice.

  laser alignment tools, hydraulic test equipment

• 27j

  Instructor, Agricultural Equipment Technician (AET)

  Saskatoon, SK

  SI

  Saskatchewan Institute Of Applied Science And Technology

  2+ ansCandidates need Grade 12 or equivalent, an Interprovincial Journeyperson certificate as an Agricultural Equipment Technician, and two years of recent experience in the trade. Experience with a wide range of agricultural equipment, precision farming and guidance systems, and Brightspace is needed.

  Brightspace, MS Office, OEM online technical manuals, CNH TopTech

• 27j

  Production Planner

  Abbotsford, BC

  IM

  I M P Group International Inc.

  3+ ansCandidates need 3-5 years of heavy maintenance planning experience on transport category aircraft, plus advanced Microsoft Project skills and fluent English. A degree or diploma in aviation or operations management, or an aircraft maintenance certificate approved by TCA, is also required.

  Microsoft Project, Excel, database programs

• 27j

  Mechanic - Canadian Royalties Inc.

  Quebec

  Temps plein

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  3+ ansThe Redpath Group needs candidates with at least 3 years of underground mechanical experience, a trade qualification or equivalent, and Ontario Hard Rock Underground Service Common Core or FMTM training. Candidates must also hold a valid driver's licence and General Explosives Permit, pass a drug screening and medical exam, and read blueprints and diagnostic schematics.

  Texa, Cat ET, Sandvik Toolman, Cat SIS 2.0, Maclean Documoto, Redpoint

• 27j

  Heavy Equipment Mechanic - 421A

  Concord, ON

  50–55 $/hSur placeTemps plein

  DS

  DEG Services

  Candidates need a valid Ontario 421A Certificate of Qualification and a G Class driver's licence with a clean abstract. Experience with heavy construction equipment, diesel engines, hydraulics and electrical diagnostics is required.

  diagnostic software, schematics, technical manuals, welding equipment, rigging equipment

• 28j

  Apprentice Service Technician

  St. John's, NL

  SG

  Survitec Group Limited: Survitec is the world’s largest manufacturer and supplier of liferafts, Marine Evacuation Systems (MES) and offshore rental PPE.

  Candidates need a passion for safety and precision, strong attention to detail, and the ability to follow strict protocols. They should be organized, work well in a team in a fast-paced setting, and be willing to travel for training and be on call.

  C-SAM, laundry equipment, pressure test equipment, delivery vehicles

• 28j

  Sales & Application Engineer - Partial Discharge Monitoring - NA Region (f/m/x)

  Toronto, ON

  TélétravailTemps plein

  

  OMICRON: OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable.

  2+ ansCandidates need at least 2 years in power systems, especially high-voltage testing and field diagnostics such as DGA or partial discharge. A bachelor's degree in electrical engineering or a related field is required, and fluent English is required.

  Microsoft Outlook, Microsoft Excel, Microsoft PowerPoint, CRM system

• 28j

  Commodity Manager - PCBA & Electronics

  Burnaby, BC

  78k–111k $/anTemps plein

  

  LMI Technologies

  7+ ansCandidates need at least seven years of purchasing experience, including strategic sourcing for PCBAs and electronic components. Experience with ERP/MRP systems, a Quality Management System, and offshore contract manufacturing suppliers is also required.

  NetSuite, PLM, ERP, MRP

• 28j

  Aviseur technique - Turbine/alternateur mévanique (Manic 3)

  Baie-Comeau, QC

  Temps plein

  

  GE Vernova: GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world.

  5+ ansDiplôme d'ingénieur en mécanique, électricité ou génie civil, ou équivalent; Minimum de 5 ans d'expérience en génératrices hydroélectriques, de préférence en supervision; Minimum de 5 ans d'expérience en installation de

  MS Office, outils de précision mécaniques, outils d'usinage sur site, moyens de mesure

• 28j

  Shop Technician - Industrial Mechanic

  Saskatoon, SK

  Temps plein

  AI

  Applied Industrial Technologies LP

  5+ ansCandidates need at least 5 years of hands-on hydraulic experience and a journeyman industrial or heavy-duty mechanic certificate or technical school program. Strong mechanical aptitude, schematic reading, tool proficiency and oral and written communication are required.

  Flow meters, Pressure gauges, Test benches, Torque wrenches, Hydraulic hoses, Steel tubing

• 28j

  Maintenance Technician

  Abbotsford, BC

  Temps plein

  

  Goldbeck Recruiting: Goldbeck Recruiting is a recruitment and executive search firm based in Vancouver, BC helping companies fill challenging positions since 1997.

  3+ ansCandidates need at least three years of mechanical, automotive or production equipment repair, two years of mobile equipment work, and forklift operator certification. A Class 5 licence with a clean driving record, WHMIS training and strong English communication are required.

  forklift, pallet jack, CNC machine, hand tools, Microsoft Outlook, Microsoft Word

18 entreprises