Emplois “API inspection codes” au Canada – Page 7

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Pipeline Inspectors (General, Welding & Coating) - Northern Ontario

  Thunder Bay, ON

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need several years of pipeline or construction inspection experience, plus API 1169 and API 1184 certifications. Welding and coating inspectors also need specific CSA or AMPP/NACE credentials.

  Welding, Regulatory compliance, Inspection, Documentation, Construction methods, Red Seal

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - Northern Ontario

  Dryden, ON

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need several years of pipeline or construction inspection experience, plus API 1169 and API 1184 certifications. Welding and coating inspectors also need specific CSA or AMPP/NACE credentials.

  Welding, Regulatory compliance, Inspection, Documentation, Construction methods, Red Seal

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - Northern Ontario

  Kenora, ON

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need several years of pipeline or construction inspection experience, plus API 1169 and API 1184 certifications. Welding and coating inspectors also need specific CSA or AMPP/NACE credentials.

  Welding, Regulatory compliance, Inspection, Documentation, Construction methods, Red Seal

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - Northern Ontario

  Sault Ste. Marie, ON

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need several years of pipeline or construction inspection experience, plus API 1169 and API 1184 certifications. Welding and coating inspectors also need specific CSA or AMPP/NACE credentials.

  Welding, Regulatory compliance, Inspection, Documentation, Construction methods, Red Seal

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - Alberta

  Grande Prairie, AB

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need 3+ years of general inspection experience, or 2+ years of coating or 8-10 years of welding inspection experience, plus API 1169 and API 1184 certification. Pipeline construction knowledge, oil and gas experience and a high school diploma are also required.

  Inspection test plans, API 1169, API 1184, CSA Z662, ASME B31.3

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - Alberta

  Edson, AB

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need 3+ years of general inspection experience, or 2+ years of coating or 8-10 years of welding inspection experience, plus API 1169 and API 1184 certification. Pipeline construction knowledge, oil and gas experience and a high school diploma are also required.

  Inspection test plans, API 1169, API 1184, CSA Z662, ASME B31.3

  1 mois

  Pipeline Inspectors (General, Welding & Coating) - BC

  Dawson Creek, BC

  900 $/jourSur placeContrat

  

  SGS

  3+ ansCandidates need several years of pipeline inspection experience, API 1169 and API 1184 certifications, and oil and gas pipeline or industrial facility experience. Welding and coating inspectors need specific CSA, AMPP or NACE credentials and are strongly preferred if they have that background.

  Welding, Regulatory compliance, Inspection, Documentation, Construction methods, Red Seal

  1 mois

  Inspectrice / Inspecteur Pétrolier

  Montréal-Est, QC

  Sur placeTemps plein

  

  SGS

  3+ ansDiplôme d'études secondaires ou équivalent; Minimum de 3 ans d'expérience pertinente; Un an d'expérience en pétrole ou inspection de cargaisons un atout

  Word, Excel

  1 mois

  Petroleum Inspector

  Montréal-Est, QC

  Sur placeTemps plein

  

  SGS

  3+ ansCandidates need a high school diploma and at least 3 years of relevant or equivalent experience. Post-secondary training in cargo inspection, petroleum experience, and strong attention to detail, communication and the ability to work irregular hours are assets.

  Sampling equipment, Calibration equipment

  1 mois

  Materials Engineering Technologist

  Calgary, AB

  31–41 $/hSur placeTemps plein

  

  SGS

  3+ ansCandidates need a post-secondary diploma or degree in materials engineering technology, welding engineering technology or a related program. They must be registered or eligible for ASET registration and ideally have 3 to 5 years of laboratory experience, with strong attention to detail, time management and communication skills.

  Image analysis software, AutoCAD

• 1 mois

  Mechanical Inspector (Casual Part Time) Ontario

  Edmonton, AB +1

  50–70 $/hTemps partiel

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  5+ ansIntertek Canada needs candidates with 5+ years of third-party vendor inspection, expediting or auditing experience, plus NDT, dimensional, pressure and weld inspection skills. Candidates need a valid driver's licence, pressure vessel and lifting equipment experience, and oil and gas code knowledge.

  MS Office, Outlook

  1 mois

  Mechanical Inspector (Casual Part Time) Grande Prairie, AB

  Edmonton, AB +1

  Temps partiel

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  5+ ansCandidates need five or more years of third-party vendor inspection, expediting or auditing experience, plus hands-on quality control, NDT, pressure testing and welding inspection skills. Experience with mechanical and pressure vessels, lifting equipment and oil and gas codes is required, along with a valid driver's licence.

  MS Office, Outlook

  1 mois

  Mechanical Inspector (Casual Part Time) Québec

  Edmonton, AB +1

  Temps partiel

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  5+ ansCandidates need 5+ years of third-party vendor inspection, expediting or auditing experience, plus quality control and NDT, pressure testing and welding inspection experience. Knowledge of oil and gas codes, pressure vessels and lifting equipment is required, along with a valid driver's licence.

  Outlook

  1 mois

  Pipe mill inspector (Casual Part Time) Regina SK

  Edmonton, AB +1

  Temps partiel

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  8+ ansCandidates need about eight years of pipe-related quality assurance experience and the ability to read national codes, standards, specifications and drawings. Fluency in English and proficiency in Microsoft Office are required, and an industry certification such as AWS CWI or NACE is preferred.

  Microsoft Office, Email, Internet communication systems

  1 mois

  Pipe mill inspector (Casual Part Time) Alberta

  Edmonton, AB

  20–35 $/hTemps partiel

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  8+ ansCandidates need at least eight years of pipe-related quality assurance experience, and must read codes, standards and drawings. Fluency in English, Microsoft Office skills, and attention to detail are required. A valid industry certification such as AWS CWI, CWB Level 2, API 510/570 or NDT Level II is preferred.

  Microsoft Office

• 1 mois

  Lead Mechanical Engineer, Resources

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  12+ ansCandidates need 12+ years of senior mechanical engineering experience in mining or industrial settings, with EPCM project leadership and knowledge of ASME, API and TEMA codes. A Bachelor's in Mechanical Engineering and P.Eng. registration or eligibility in Canada are required.

  ESRI What if?, Procurement, Collaboration, Process engineering, Inspection, Quality assurance

• 1 mois

  Technical Account Manager

  Woodstock, ON +1

  90k–100k $/anTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  5+ ansArrow needs a candidate with a technical degree or equivalent experience, 5+ years in technical sales or estimating in custom manufacturing, and a record of $5M+ in annual bookings. Candidates must read engineering drawings and GD&T and be proficient in Excel and CRM systems.

  Excel, CRM platform, ERP/MRP system, Microsoft Office

• 1 mois

  Quality Lead - Expression of Interest

  Cold Lake, AB

  Sur placeTemps plein

  

  FLINT Corp.: FLINT is a leading provider for Maintenance & Turnarounds, Wear Technologies, Fabrication, Modularization & Machining, Facility Construction,…

  5+ ansCandidates need 5+ years of quality control experience, a related technical diploma and knowledge of ASME and CSA codes. A CSA W178.2 Level II or API 510/570 inspector credential and strong leadership skills are also needed.

  Bluebeam, Microsoft Office

• 1 mois

  Asset Integrity and Welding Engineering

  Edmonton, AB

  Sur placeTemps plein

  

  Apave North America Corp.: A service provider of Non-destructive Testing (NDT), Inspection, and Asset Integrity Engineering.

  2+ ansCandidates need a welding, materials, or mechanical engineering bachelor's degree and APEGA registration as a P.Eng. or E.I.T. They need 2 to 5 years in pipeline, oil and gas, or petrochemical work, plus knowledge of ASME, CSA, API and AWS welding codes and welding processes.

  Microsoft Office

• 1 mois

  Quality Assurance (QA) Analyst

  Pitt Meadows, BC

  HybrideTemps plein

  W

  WISI

  3+ ansCandidates need a diploma or degree in computer science or IT, or equivalent experience, with 3+ years of software testing, test automation and API testing (including Postman). Hands-on VMware vSphere/ESXi and networking knowledge is also required.

  Postman, Selenium, PyTest, Jenkins, VMware vSphere, ESXi

• 1 mois

  Piping Superintendent

  New Liskeard, ON

  TélétravailTemps plein

  EI

  Edgewater Industrial Services

  10+ ans5+ gestionCandidates need 10+ years of industrial piping construction experience, 5+ years in a superintendent or senior supervisory role, and strong experience with chemical process piping, corrosion-resistant materials and refinery-type facilities. They must read P&IDs, isometrics and construction drawings.

  P&IDs, isometric drawings, pressure test equipment

• 1 mois

  API 510 Inspector - Fall Turnaround 2026

  Edmonton, AB

  70–90 $/hTélétravail

  

  Engrity Group Inc.

  2+ ansCandidates need a valid API 510 certification and at least 2 years of inspection experience, with turnaround and heat exchanger experience strongly preferred. Required site safety tickets include H2S Alive, confined space and fall protection.

  P&ID, drawings, inspection reports, EWP

• 1 mois

  Designer Team Lead

  Calgary, AB

  Sur placeTemps plein

  

  CANUSA EPC LLC: CANUSA EPC specializes in engineering, procurement, construction management, and consulting services for industrial and energy facilities.

  10+ ansCandidates need at least 10 years of experience designing engineered systems, ideally with EPCMs, producers or midstream companies, plus working knowledge of ASME and API codes. Required skills include AutoCAD Plant 3D, CADWorx, AutoCAD and Navisworks, along with leadership, communication and a valid driver's licence.

  AutoCAD, AutoCAD Plant 3D, CADWorx, Navisworks, MS Word, MS Excel

• 1 mois

  Registry Services Engineer

  Toronto, ON

  HybrideTemps plein

  

  MinuteBox

  Candidates need a solid understanding of APIs, strong JSON skills and comfort reading API documentation. Scripting experience in a language such as Python or JavaScript is strongly preferred, and strong attention to detail and teamwork are required.

  Postman, Insomnia, BigQuery, Golang, Google Suite, MS Office

11 entreprises