Emplois “assembly bench” au Canada – Page 7

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Agent Méthodes config instal Élec & Avionics / Method Agents Elec & Avionics install

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansCandidates need 5 to 10 years of experience in electrical and avionics configuration management as a Method Agent, strong SAP skills, and fluent spoken and written French and English. An aeronautics DEC (avionics preferred) or an engineering degree is expected.

  SAP, CATIA V5, 3DVia

  1 mois

  Spécialiste Senior en Conception Mécanique / Senior Specialist in Mechanical Design

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  15+ ansCandidates need a mechanical engineering degree, over 15 years of relevant aerospace experience, management experience, and deep structural and mechanical design expertise. CATIA knowledge is mandatory and English is required.

  CATIA

  1 mois

  Intégrateur.trice Système d'Air, Ingénierie / Air System Integrator, Engineering

  Montréal, QC

  Temps plein

  AC

  Airbus Canada Limited Partnership

  5+ ansCandidates need a bachelor's degree in mechanical or aerospace engineering or a related field and at least five years of aircraft systems experience. Strong knowledge of air systems, familiarity with FAR 25/CAR 525 certification, and professional fluency in English and French are required.

  Research, Vendor management, Pneumatics, Collaboration, Outdoor activities, Assembly

• 1 mois

  Test Specialist - PCL

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  3+ ansCandidates need a Bachelor's degree in Mechanical Engineering or a related field, at least 3 years of testing experience, and SolidWorks and instrumentation skills. Experience with DAQ systems and electromechanical testing is also required.

  SolidWorks, DAQ, oscilloscope, power analyzer, logic analyzer, multimeter

• 1 mois

  Systems Engineer

  Canada

  80k–105k $/anTemps plein

  PC

  Photon Control Inc.

  2+ ansCandidates need a bachelor's or master's degree in engineering, at least 2 years of related experience, and hands-on skill with SolidWorks and data analysis. Strong communication and a safety-conscious, self-starting approach are also required.

  SolidWorks, MATLAB, JMP, Minitab, LabVIEW, Python

• 1 mois

  Production Operator

  Penetanguishene, ON

  Temps plein

  

  Techform, a Division of Magna Closures Inc.

  the posting focuses on the ability to perform repetitive assembly and basic equipment adjustment. Hiring is based on experience and qualifications relevant to the job.

  assembly bench

• 1 mois

  Applications Engineering Intern

  Burlington, ON

  26–28,50 $/hTemps plein

  S

  Semtech_Canada_Corporation

  Candidates need a self-motivated, independent working style, solid analogue and digital circuit knowledge, and PCB troubleshooting experience (preferred). Soldering skill, CAD tool familiarity, strong organization, and clear written and spoken communication are also needed.

  BERT, VNA, WFM, oscilloscope, SAP, CAD tools

  1 mois

  Applications Engineering Intern

  Burlington, ON

  Temps plein

  S

  Semtech_Canada_Corporation

  Semtech Canada Corporation needs candidates who can work independently, understand analogue and digital circuits, and solder. Troubleshooting PCBs, CAD tools and strong communication and organization skills are also needed.

  BERT, VNA, oscilloscope, SAP, CAD tools, soldering equipment

• 1 mois

  Director Mechanical Engineering

  Toronto, ON

  HybrideTemps plein

  ET

  ecobee Technologies ULC

  10+ ans5+ gestionCandidates need 10+ years of consumer or industrial product development experience and 5+ years of technical leadership, plus a mechanical, mechatronics or biomedical engineering degree or equivalent practical experience. They must be strong in CAD, DFM/DFA and tolerance analysis, and have experience with manufacturing processes, product validation and Asian high-volume suppliers.

  CAD

• 1 mois

  Superviseur de production – Atelier d’outillage / Production Supervisor – Tool Room

  Canada

  Temps plein

  PW

  Pratt & Whitney Canada

  5+ ans3+ gestionDEC ou baccalauréat et 5 ans d’expérience manufacturière, dont 3 ans comme superviseur; Connaissance de l’amélioration continue (5S, lean, gemba walks); Connaissance des méthodes de fabrication, de programmation et d’usi

  SAP, ITDM

• 1 mois

  Electrical Engineering Co-op

  Surrey, BC

  

  Moment Energy

  Candidates need to be enrolled in a Bachelor's program in electrical engineering or a related field. Hands-on experience with soldering, circuit boards, wiring or prototyping is expected, and PCB design tools are a helpful asset.

  PCB design software

• 1 mois

  Certified Millwright/Industrial Mechanic Millwright

  Port Maitland, ON

  46,03 $/hSur place

  

  Innophos

  Candidates need a valid Industrial Mechanic Millwright Certificate of Qualification (433A). Welding experience with stainless steel and steel is preferred, along with food or chemical manufacturing experience and the ability to lift heavy objects.

  welding equipment, pipe bending equipment, pipe threading equipment, hand tools, burning equipment

• 1 mois

  Intern - Controls Engineer

  Toronto, ON

  HybrideStage

  

  Human Computer Lab

  Candidates need to be pursuing a Bachelor's or Master's in electrical, mechatronics or software engineering, with hands-on robot control experience. Fluency in C++ or Python, ROS/ROS2, CAD tools and hardware debugging skills are preferred.

  ROS, ROS2, URDF, Gazebo, MuJoCo, Isaac Sim

  1 mois

  Controls Engineer

  Toronto, ON

  Sur placeTemps plein

  

  Human Computer Lab

  Candidates need a Master's or PhD, or equivalent experience, in robotics, mechatronics or a related engineering field. They should have hands-on experience tuning controls on real robot hardware and be fluent in C++ or Python.

  ROS, ROS2, Gazebo, MuJoCo, Isaac Sim, SolidWorks

• 1 mois

  Manufacturing Technician - Bench Operations

  Montréal, QC

  Sur placeTemps plein

  

  nomic

  Diplôme en sciences de la vie, biotechnologie ou chimie, ou expérience équivalente; Au moins six mois d'expérience en laboratoire humide ou en production (préférable); Grande rigueur et constance dans l'exécution

  documentation numérique

  1 mois

  Senior Scientist - Manufacturing Development

  Montréal, QC

  Sur placeTemps plein

  

  nomic

  5+ ansDoctorat ou maîtrise en bioingénierie, biotechnologie, biochimie ou domaine connexe; Au moins cinq ans d'expérience en laboratoire humide dans l'industrie; Expertise en immunoessais, développement de trousses et contrôle

  Liquid handlers, Plate readers, Plate washers, Dispensers, Imaging systems, Python

11 entreprises