Emplois “Power vibrator” au Canada – Page 9

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Roller Operator

  Prince Rupert, BC

  44,35 $/h

  

  Colas

  Terus Construction asks for a high school diploma or equivalent (preferred), a Class 5 driver's licence, and industry experience as an asset. Candidates must meet safety requirements, work outdoors in all weather, and lift and carry 50 lbs repetitively.

  steel-wheeled roller, rubber-tired roller, hand roller, hand tamp, portable power roller

  1 mois

  Asphalt Roller Operator

  Crescent Valley, BC

  36,47–38,73 $/h

  

  Colas

  Candidates need preferably 1-2 seasons of roller experience on municipal, industrial or paving projects, plus proficiency operating a roller and strong safety awareness. Effective communication with operators, truck drivers and the public, and the ability to run and maintain the roller with minimal supervision, are essential.

  roller

• 1 mois

  Environmental Noise and Vibration Senior Engineer/Scientist

  Guelph, ON

  98k–125k $/anSur placeTemps plein

  

  RWDI

  6+ ansCandidates need at least 6 years of environmental noise and vibration experience and deep knowledge of Ontario permitting and land use planning. An engineering degree, with P.Eng eligibility preferred, a valid driver's licence and the ability to work in person in Guelph are required.

  Urban planning, Data analysis, Documentation, P.Eng., Valid driver's licence, Python

• 1 mois

  Section Manager, Structural Integrity

  Toronto, ON

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  8+ ansCandidates need solid knowledge of finite element and piping analysis tools, nuclear codes and standards, and CANDU technology. Leadership experience managing engineers, along with report writing and presentation skills, is required.

  ANSYS Mechanical, PIPESTRESS, AutoPIPE, ANSYS CFX, AFT Impulse

• 1 mois

  Millwright (Rotating/Steady Midnights)

  Ingersoll, ON

  Temps plein

  A

  AMTB

  5+ ansCandidates need a Licensed Industrial Millwright (433A) in Ontario and at least 5 years of automotive or heavy manufacturing experience. Strong mechanical aptitude with hydraulics, pneumatics, conveyors and gear systems, and willingness to work shifts, weekends and overtime, are also required.

  hand tools, power tools, vibration analysis equipment, thermography equipment, CMMS, PLC

• 1 mois

  Spécialiste en mise en service/Commissioning Specialist

  Brossard, QC

  Temps plein

  GR

  GE Renewable Energy Canada Inc.

  8+ ansBaccalauréat en génie électrique ou mécanique, ou expérience pertinente; Au moins 8 ans d'expérience en centrales hydroélectriques; Forte culture SSE et application des procédures LOTO

  Microsoft Project (MSP), Primavera, Microsoft Office, data acquisition software

  1 mois

  Commissioning Coordinator

  Niagara Falls, ON

  Temps plein

  GR

  GE Renewable Energy Canada Inc.

  3+ ansCandidates need a bachelor's degree in electrical or mechanical engineering or relevant hydro plant experience, plus 3 to 5 years in hydroelectric commissioning. They must know generator, turbine, governing and excitation systems, follow EHS rules, and be fluent in English.

  Microsoft Office, Outlook, Word, Excel

• 1 mois

  Specialist Mechanical Engineer - Turbomachinery

  Calgary, AB +1

  Sur placeTemps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  Candidates need a Mechanical Engineering bachelor's or master's degree, P.Eng. registration with APEGA or eligibility for it, and extensive progressive experience with turbomachinery and high-speed rotating equipment. Deep knowledge of rotor dynamics, vibration analysis and API standards is expected.

  machinery analysis software, engineering document management systems

• 1 mois

  Développeur logiciel - Analyse d'essai moteur / Software Developer - Engine Test Analysis

  Longueuil, QC

  Temps plein

  

  RTX

  8+ ansBaccalauréat en génie logiciel, informatique, électrique, mécanique ou aérospatial; 8 ans d'expérience (ou 5 ans avec une maîtrise); Expérience full-stack en C/C++, Java, JavaScript, FORTRAN, Vue.js

  Jira, Azure DevOps, Confluence, GitHub, Oracle DB, Vue.js

• 1 mois

  Fitter- Assembly/ Bonding

  Amherst, NS

  IM

  I M P Group International Inc.

  Candidates need high school completion, demonstrated machine and measuring experience, and the ability to read aircraft blueprints. Mechanical aptitude, manual dexterity, attention to detail, WHMIS training, and eligibility for the Controlled Goods Program and a Secret-level clearance are also required.

  Hand tools, Power tools, Jigs, Templates, Measuring instruments

• 1 mois

  Concrete Finisher

  Saskatoon, SK

  Temps plein

  SC

  SNA CONSTRUCTION INC.

  Candidates need hands-on experience finishing concrete and using power trowels, vibrators and other finishing tools. The posting asks for work to specified tolerances and quality standards, and for a safe, organized work site.

  power trowel, power vibrator, hand finishing tools, power tools

• 1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  Candidates need a diploma or degree in electrical, electronics, mechanical or a related field. They need hands-on experience with sensors, data acquisition, bench test tools and data analysis, and programming in Python or C/C++.

  oscilloscope, power analyzer, logic analyzer, multimeter, DAQ, SolidWorks

• 1 mois

  Concrete Sidewalk and Curb Finisher

  Coquitlam, BC

  31,15–44,50 $/h

  

  Amrize

  2+ ansAmrize needs candidates with at least 2 years of concrete finishing experience, a high school diploma, and prior construction experience. Leadership experience and a growth mindset are also sought.

  power vibrator, hand finishing tools, power finishing tools, respirator

  1 mois

  Concrete Sidewalk and Curb Finisher

  Coquitlam, BC

  44,84–48,61 $/h

  

  Amrize

  2+ ansCandidates need at least 2.5 years of experience as a concrete finisher, including sidewalks, curbs and construction sites, plus a high school diploma. English is mandatory, and the work demands heavy lifting and outdoor work in all weather.

  power vibrator, hand finishing tools, power finishing tools

• 1 mois

  Industrial Millwright/Operator

  Ottawa, ON

  82k–96k $/anTemps plein, Temporaire

  

  CityofOttawa

  5+ ansCandidates need an Ontario Industrial Mechanic Millwright 433A certificate, an 8000-hour apprenticeship, and at least 5 years of experience as a licensed industrial millwright. Water or wastewater operator certification, a G driver's licence and English proficiency are also required.

  SCADA, Maintenance Management System, forklift, mobile crane, welding equipment, precision measurement tools

• 1 mois

  Wind Technician - Multiple Levels [On-Site]

  Belle River, ON

  21,35–50,29 $/hTemps plein

  

  EDF power solutions

  1+ ansCandidates need a high school diploma or equivalent, with one year of related experience or training preferred. Safety certifications such as OSHA 10, Global Wind Organization training and NFPA 70E are preferred, along with a valid driver's licence.

  infrared camera, IV curve tracer, multimeter, megohmmeter, pyranometer, inclinometer

• 1 mois

  Intermediate/Senior Noise Engineer

  Calgary, AB +1

  Temps plein

  

  Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…

  10+ ansCandidates need a professional engineer licence or eligibility, a mechanical or related engineering degree, and 10+ years of acoustics consulting experience. They must know noise regulations and have led multidisciplinary teams.

  AI-enabled tools

• 1 mois

  Mech and Robotics Tech

  Brampton, ON

  Sur placeTemps plein

  CA

  CAN ASA-Jones Lang LaSalle Real Estate Services, Inc.

  2+ ansCandidates need a high school diploma, at least 2 years repairing material handling equipment, and at least 2 years of predictive and preventative maintenance. Vocational training in mechanical or electrical fields, automated conveyor experience and blueprint reading are preferred.

  CMMS

• 1 mois

  Concrete Finisher

  Paradise, NL

  28–32 $/hTemps plein

  

  Clintar Paradise, NL

  4+ ansClintar Paradise needs candidates with 4-5 years of commercial construction or landscaping experience and a record of high-quality results. Strong communication and problem-solving skills and the ability to work in a fast-paced setting are also required.

  power vibrator, straightedge, float

  1 mois

  Concrete Finisher

  Paradise, NL

  28–32 $/hTemps plein

  

  Clintar Paradise, NL

  4+ ansClintar Paradise needs candidates with 4-5 years of commercial construction or landscaping experience and a record of high-quality results. Strong communication and problem-solving skills and the ability to work in a fast-paced setting are also required.

  power vibrator, straightedge, float

• 1 mois

  Millwright

  Oshawa, ON

  45,45 $/hTemps plein

  AO

  AGS - Oshawa Division

  8+ ansCandidates need a Grade 12 education, a valid Ontario Certificate of Qualification or an 8,000-hour apprenticeship, or eight years of practical industrial millwright experience. Strong skills in reading drawings, precision measuring and safe lockout procedures are expected.

  hand and power tools, lathe, milling machine, overhead cranes, hoists, vibration analysis equipment

• 1 mois

  Journeyperson Industrial Mechanic

  Carberry, MB

  Temps plein

  

  McCain Foods

  Candidates need a Red Seal Millwright ticket and Grade 12 education. Knowledge of pneumatic, hydraulic and mechanical systems such as pumps, bearings and gearboxes is needed, plus the ability to work with minimal supervision.

  Hand tools, Power tools, Vibration analysis equipment, Hydraulic tools

• 1 mois

  Senior Mechanical Engineer

  Burnaby, BC

  Temps plein

  D

  Danaher

  Candidates need a bachelor's degree in mechanical or a related engineering field, or equivalent experience. They need long experience designing automated equipment and advanced skill creating production-ready CAD and release documentation.

  CAD, pneumatic systems

• 1 mois

  Millwright, Journeyperson & Apprentice

  Calgary, AB +1

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  Candidates need a provincial journeyperson ticket or an apprenticeship indenture, the CSTS-20 certificate, and millwright experience in industrial construction. They must work independently and in teams, lift up to 25 kg, work in all weather, and speak and write English fluently.

  rig equipment, dollies, vibration analysis equipment, CCTV monitoring systems, computerized control systems

20 entreprises