Emplois “Precision mechanics” au Canada – Page 9

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 5j

  Physiotherapy Support Worker

  Newfoundland and Labrador

  26,92–29,80 $/hTemps partiel

  

  Newfoundland and Labrador Health Services

  Candidates need completion of an approved Physiotherapist Assistant or Rehabilitation Assistant program, the ability to work collaboratively and use clinical judgment, and a satisfactory work performance record.

  mechanical lift, hand tools

  5j

  Rehabilitation Assistant

  Newfoundland and Labrador

  Temporaire

  

  Newfoundland and Labrador Health Services

  Candidates need completion of an approved Physiotherapist Assistant, Occupational Therapist Assistant or Rehabilitation Assistant program. They also need a satisfactory work record and the ability to work collaboratively and use sound clinical judgment.

  mechanical lift

• 5j

  Trade, Millwright (Mount Milligan)

  Fort St. James, BC

  59,87 $/hTemps plein

  

  Centerra Gold

  Candidates need Industrial Mechanic (Millwright) training and Journeyperson certification, Red Seal preferred, plus a Class 5 driver's licence. Mining or heavy industrial experience, blueprint reading, troubleshooting skills and the ability to lift 50 pounds are also needed.

  laser alignment tools, dial indicators, hand tools, power tools, Microsoft Word, Microsoft Excel

• 5j

  Millwright

  Nisku, AB

  40 $/hContrat

  

  Randstad Canada

  Candidates need an active Alberta Journeyperson Millwright ticket or Red Seal endorsement, plus proven hands-on gearbox rebuild and hydraulic repair experience. Strong diagnostic skills and clear English for logging repairs are also required.

  Laser alignment equipment, Dyno test equipment, Hydraulic test equipment

  5j

  Heavy Equipment Technician

  Clairmont, AB

  47–54 $/hTemps plein

  

  Randstad Canada

  Candidates need a Red Seal or Journeyman Heavy Duty Mechanic certification, or experienced senior apprentice status. They need strong diagnostic skills in hydraulics, electrics and diesels, a valid Class 5 licence with a clean driving record, and their own tool kit.

  OEM diagnostic software, wire prints, service truck, hand tools, air tools

  5j

  Structural Welder

  Nisku, AB

  38–40 $/hContrat

  

  Randstad Canada

  Candidates need a valid Alberta Journeyperson or Red Seal certification, active CWB FCAW/MCAW all-position tickets, and proven heavy-industrial shop experience welding thick-plate structural steel. Strong safety habits and a good work ethic are essential.

  FCAW wire-feed gun, Robotic welding arm, Robotic positioner

  5j

  Electro - Mechanical Technologist, Dartmouth, NS

  Dartmouth, NS

  Contrat

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on electro-mechanical assembly experience and a high school diploma or GED. They must read engineering drawings and schematics, use hand and electrical test tools, and troubleshoot well.

  Multimeter, Power supplies, Precision hand tools, Power tools, Shop equipment

  6j

  Maintenance Technician | Straight days

  Mississauga, ON

  46–52 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a Certified Industrial Millwright (433A) or 5+ years of mechanical maintenance experience in fast-paced manufacturing. Strong troubleshooting of hydraulic, pneumatic and mechanical failures, basic MIG welding and strict lockout/tagout practice are required.

  CMMS, lathe, drill press, band saw, torque-fastening tools, plant-floor tablets

• 5j

  Maintenance and Repair Associate

  Hawkesbury, ON

  Temps plein

  SE

  Sports Experts

  Candidates need to be bilingual in French and English, hands-on and detail-oriented, and comfortable with tools and mechanical work. Customer service experience and bicycle repair or mechanics experience are assets.

  hand tools, ski binding tools

• 5j

  Machine Tube Forming Operator

  Stratford, ON

  31,81 $/hTemps plein

  C

  Cleaver-Brooks: Cleaver-Brooks, Inc., a manufacturer of boiler room products for over 90 years, is the only single source manufacturer and supplier of boiler room…

  Candidates need manufacturing experience, strong math and mechanical aptitude, and the ability to read blueprints and schematics. Preferred experience operating an overhead crane, and the physical stamina for long, repetitive shifts.

  CAD/CAM systems, overhead crane, forming machines

• 5j

  Manufacturing Technician

  Burnaby, BC +1

  25–33 $/hSur placeTemps plein

  DT

  DarkVision Technologies

  DarkVision Technologies asks for hands-on product assembly or mechanics/electronics experience, soldering skill, and the ability to read mechanical drawings and wiring diagrams. A technical certificate or diploma and experience with quality control or electronic test equipment are preferred.

  heated pressure vessel, soldering iron, microscope

• 5j

  Junior Forensic Engineering Specialist

  Oakville, ON

  HybrideTemps plein

  

  J.S. Held LLC: Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advise clients seeking to realize value…

  Candidates need a B.Sc. in Engineering or Physics, strong written and verbal English, attention to detail, and proficiency in Microsoft Word and Excel. A valid Ontario G licence and access to a vehicle are required, and fieldwork in outdoor weather is expected.

  Microsoft Word, Microsoft Excel

• 5j

  Hydraulic Mechanic Trainee

  Middle West Pubnico, NS

  Temps plein

  SF

  Skipper Fisheries (Comeau Sea Foods Limited)

  Candidates need experience as a hydraulic mechanic, mechanic, or welder/fabricator, and experience reading schematics is required. They must be able to work in cold conditions, lift up to 50 lbs, climb, crouch, and hold a valid driver's licence with a clean abstract.

  welding equipment, machining equipment

  5j

  Machinist

  Middle West Pubnico, NS

  Temps plein

  SF

  Skipper Fisheries (Comeau Sea Foods Limited)

  Candidates need a Journeyman Machinist certification (Red Seal preferred) or equivalent experience, strong blueprint reading and manual machining skills, and the ability to lift up to 50 lbs in cold conditions while wearing PPE.

  Mills, Lathes, PPE

• 5j

  Heavy Equipment Mechanic

  Saulnierville, NS

  Temps plein

  CS

  Comeau Sea Foods Limited

  Candidates need a high school diploma and certification as a heavy equipment mechanic or a registered apprenticeship. A valid driver's licence with a clean record, strong knowledge of diesel, hydraulic and air brake systems, and comfort with physically demanding work are also required.

  diagnostic tools, forklift, hydraulic tools, hand tools

• 6j

  Senior Compensation Specialist

  Calgary, AB +3

  Temps plein

  

  ATB

  10+ ansCandidates need 10+ years of progressive compensation advisory experience, including variable incentive plans and financial-industry pay. They also need strong analytical, communication and SAP SuccessFactors skills, with interest or experience in leading a team.

  SAP SuccessFactors, Google Workspace

• 6j

  Line Mechanic (PM)

  Brampton, ON

  

  Sun Pharmaceutical Industries Ltd: Sun Pharma is the world's fourth-largest speciality generic pharmaceutical company and No.

  5+ ansCandidates need an Industrial Mechanic License (433A) with a strong industrial millwright background and at least five years in a similar pharmaceutical, food and beverage or consumer goods packaging role. They also need PLC and pneumatics knowledge, troubleshooting skills, and comfort with rotating shifts.

  PLC, SAP, MES, CAD

• 6j

  Staff AI Builder

  Télétravail au Canada

  Télétravail

  

  Robots and Pencils: The company has earned recognition as an AWS Advanced Tier Services Partner, an AWS Pattern Partner, and an AWS Business Value Realization partner.

  6+ ansCandidates need 6+ years of software engineering experience, including GenAI systems in production. They need hands-on skills in agentic AI, RAG, LLM evaluation and observability, prompt engineering, and the AWS GenAI stack, plus strong Python and Node.js.

  AWS Bedrock, Amazon Bedrock Agent Core, AWS Lambda, DynamoDB, OpenSearch, Step Functions

• 6j

  Interim Manager of Program Operations

  Guelph, ON

  HybrideTemps plein, Temporaire

  

  Ontario Soil and Crop Improvement Association

  2+ ansCandidates need a post-secondary degree in a related field such as agriculture, soil science, or natural resource management, plus 2 to 5 years of progressive program administration experience with leadership. Experience with cost-share or funding programs and government reporting is required.

  Microsoft Office, databases, program tracking systems, visualization platforms

• 6j

  Director, Recreation

  Kuujjuaq, QC

  116k–159k $/an

  KR

  Kativik Regional Government

  5+ ansBachelor's degree in recreation or related field, or exceptional experience; Minimum five years of relevant work experience; Strong leadership and team motivation skills

  Negotiation, Communication skills, Promote recreation activities, Leadership, Think creatively, Problem solving

• 6j

  Shop Foreman/Forewoman

  Elmsdale, NS

  CC

  CanaDream Career Page

  Candidates need extensive hands-on RV or automotive repair experience, strong troubleshooting and mechanical skills, and shop leadership or mentoring experience. An RV technician certification or equivalent, a valid driver's licence and a willingness to obtain LP Gas certification are needed.

  Testing equipment, Work order system, Inventory system, Manufacturer service manuals, Propane equipment

• 6j

  Painter

  Manitoba

  Temps plein

  PM

  PhiBer Manufacturing Inc.

  Candidates need self-motivation, organization and prioritization skills, and mechanical aptitude. General power tool experience is required, and the posting asks for a team-oriented worker.

  paint equipment

• 6j

  Industrial Millwright Mechanic

  Lantz, NS

  Temps plein

  TS

  The Shaw Group

  Candidates need a Licensed Millwright-Industrial Mechanic licence and proven industrial mechanic experience. Skills in hydraulics, motors, automation and logic controllers, plus rebuild and preventive maintenance experience, are required. Concrete or precast equipment experience is a strong asset.

  CMMS, PLC, Welding equipment

• 6j

  Journeyman Machinist

  Alberta

  Temps plein

  

  Red Flame Industries Inc: Red Flame Industries is an innovative industrial service company providing plant and pipeline services, engineering and certification, and…

  5+ ansCandidates need a Journeyman Machinist ticket, at least 5 years of machining experience, and experience with manual and CNC equipment, flange-facing and cold-cutting. A valid Class 5 driver's licence and strong blueprint reading skills are also required.

  Conventional machine tools, Portable machining equipment, Precision measuring instruments

18 entreprises