Emplois “Siemens software” au Canada – Page 9

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Technical Expert, Stress Engineering

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  12+ ansCandidates need a mechanical or aerospace engineering degree and at least twelve years in aerospace, including OEM stress integration or aerostructure design experience. They also need strong aircraft structural substantiation, damage tolerance and composite certification knowledge.

  Siemens Simcenter 3D, FEA software

  1 mois

  Professional, Engineering, Electrical wiring integrator change management

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  3+ ansCandidates need a technical or university degree in avionics or electrical engineering, or equivalent experience, plus about 3 years in aerospace. Wiring design, installation or troubleshooting experience and familiarity with Siemens or similar ECAD tools are expected, along with strong English communication skills.

  Siemens ECAD, MS Office

  1 mois

  Technical Expert, System Stress

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  12+ ansCandidates need a bachelor's or master's in mechanical or aerospace engineering and at least twelve years in aerospace, including OEM stress integration and aircraft structural substantiation. Experience with FEA software is needed, and Siemens Simcenter 3D is an asset.

  Siemens Simcenter 3D, FEA software

  1 mois

  (CONTRACT)- Loads, Dynamics & Aeroelasticity Analysis

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ ansCandidates need a Bachelor's or Master's in aerospace or mechanical engineering and 5+ years of loads, dynamics or aeroelasticity experience. Strong MSC and Simcenter NASTRAN skills, MATLAB or Python, and clear technical writing are required.

  MSC Nastran, Siemens Simcenter NASTRAN, DMAP, MSC ADAMS, MATLAB, Python

• 1 mois

  PLM Solution Architect/Architecte de solutions PLM

  Montréal, QC

  76k–179k $/an

  

  Capgemini

  3+ ans3+ gestion3 à 5 ans d'expérience en gestion et mentorat d'équipes; 7+ ans d'expérience sur ENOVIA/3DEXPERIENCE; 2 à 5 ans d'expérience sur CATIA V5/ENOVIA V5

  ENOVIA, 3DEXPERIENCE, CATIA V5, Siemens Teamcenter, PTC Windchill

  1 mois

  PLM Solution Architect/Architecte de solutions PLM

  Montréal, QC

  71k–166k $/an

  

  Capgemini

  7+ ansPlus de 7 ans d'expérience sur ENOVIA/3DEXPERIENCE; De 2 à 5 ans d'expérience sur CATIA V5 et ENOVIA V5; Expérience comme architecte de solutions ou conseiller PLM senior

  ENOVIA, 3DEXPERIENCE, CATIA V5, Siemens Teamcenter, PTC Windchill

  1 mois

  PLM Solution Architect/Architecte de solutions PLM

  Montréal, QC

  76k–179k $/an

  

  Capgemini

  7+ ans5+ gestion7 à 12 ans d'expérience en configuration de solutions PLM; 5 à 7 ans de direction de projets 3DEXPERIENCE, Teamcenter ou Windchill; Plus de 5 ans en intégration de données PLM et SAP S/4HANA

  3DEXPERIENCE, Teamcenter, Windchill, CATIA V5, ENOVIA V5, SAP S/4HANA

  1 mois

  Analog and RF Layout Engineer

  Toronto, ON

  

  Capgemini

  6+ ansCandidates need 6+ years of analog, RF or mixed-signal IC layout experience, including advanced FinFET nodes at 7nm and below. They need hands-on skill with Cadence, Synopsys or Siemens EDA tools and strong knowledge of DRC, LVS and reliability constraints.

  Synopsys, Siemens EDA, Mentor Graphics

• 1 mois

  Student Engineering Intern

  Winnipeg, MB

  Temporaire

  

  Motor Coach Industries: Beyond manufacturing, MCI provides comprehensive aftermarket support, including maintenance, repair, 24/7 roadside assistance, parts, and technician…

  Candidates need to be enrolled in a Mechanical or Electrical Engineering program, with strong organization, analysis and communication skills. CAD and Microsoft Office skills are needed, and prior co-op, internship or manufacturing experience is an asset.

  Siemens NX, SolidWorks, AutoCAD, Microsoft Excel, Microsoft Word, Microsoft PowerPoint

• 1 mois

  Controls Specialist

  Barrie, ON

  

  JENOPTIK AG

  3+ ansCandidates need an engineering degree or engineering technologist/technician credential (BSc., P. Eng., or CET), with experience rising from basic at the Junior level to 6+ years at the Senior level. Knowledge of Safety PLCs, industrial communication networks and robot integration is required.

  Allen Bradley ControlLogix, Allen Bradley HMI software, Siemens TIA Portal, Siemens Step 7, MS Office

• 1 mois

  HW & SW Applications Admin 1

  Toronto, ON

  

  Celestica International LP

  5+ ansCandidates need a bachelor's degree in computer science, software or electrical engineering, or a related field, and 5+ years of enterprise IT or application engineering experience, including 2+ years supporting an R&D engineering team. Hands-on experience with EDA/CAD suites, DevOps tools, license management and Linux and Windows environments is required.

  Azure DevOps, Jira, Git, Docker, Kubernetes, PTC Creo

• 1 mois

  L15-Maintenance Mechanic L15 - OP910

  Smiths Falls, ON

  56k–93k $/an

  

  our team

  3+ ansCandidates need 3 to 5 years of industrial maintenance experience in manufacturing, with mechanical troubleshooting skills. They should know hydraulic, pneumatic, electrical and CNC systems, and be comfortable with CMMS software and Microsoft Office.

  CMMS, PLC, CNC machines, Aluminum extrusion saws, Punches, Microsoft Excel

• 1 mois

  Senior Controls Systems Software Designer

  Woodbridge, ON

  

  ATS Automation: ATS’ reputation, knowledge, global presence and standard automation technology platforms differentiate the Company and provide competitive…

  5+ ansCandidates need 5+ years programming PLCs and HMIs in Rockwell Studio 5000 or Siemens TIA Portal, plus 3 years on SCADA and MES systems. A post-secondary degree in mechatronics, systems, electrical or computer engineering is expected, along with structured-text skills in Python, C# or Visual Basic.

  Rockwell Studio 5000, Siemens TIA Portal, Ignition, ATS SAMS, ATS Test Executive, Python

• 1 mois

  Controls Engineer II (Airport Montreal)

  Montréal, QC

  

  Daifuku: India: https://www.linkedin.com/company/diipl/

  2+ ansDiplôme en automatisation ou génie électrique, ou expérience équivalente; Deux ans d'expérience en contrôle industriel (préféré); Expérience avec PLC Siemens S7 (préféré)

  Siemens S7-300, Siemens S7-400, Siemens S7-1500, Profibus, Profinet

  1 mois

  Controls Systems Technician (Airport Montreal)

  Montréal, QC

  

  Daifuku: India: https://www.linkedin.com/company/diipl/

  Diplôme en automatisation, électronique industrielle ou génie, ou expérience équivalente; Expérience avec les PLC Siemens S7 (préféré); Connaissance des PLC de sécurité et des réseaux Profibus et Profinet (préféré)

  Siemens S7 PLC, Profibus, Profinet, frequency inverters, encoders, sensors

• 1 mois

  Controls Engineer

  Windsor, ON

  Temps plein

  

  Porter Engineered Systems - A Division of Pangeo Group: were acquired by Middlemarket Capital Management Company and were combined with Kadee Metalfab LLC to form Porter Group LLC.

  5+ ansCandidates need a bachelor's degree or technologist diploma in electrical engineering, automation or a related field, plus 5 to 7 years of controls engineering in automotive manufacturing. Required skills include Siemens TIA Portal, Allen-Bradley, robotics, machine vision, servo drives and motion control.

  Siemens TIA Portal, Allen-Bradley PLC, Robots, Machine vision systems, Servo drives, Microsoft Office

• 1 mois

  Registered Veterinary Technician, Rehab

  Dartmouth, NS

  Temps plein

  

  Ethos Veterinary Health

  1+ ansCandidates need a veterinary rehabilitation certification (CCRT, CCRA, CCRP or CCAT) or current enrollment in one, and one year of rehab experience is preferred. Strong anatomy knowledge, client communication skills and comfort working on the floor with patients, including large dogs, are required.

  Underwater treadmill, Class 3B or Class 4 laser, NMES unit, TENS unit, Digital radiography equipment, Rehabilitation software

• 1 mois

  Senior Electrical Engineer - SCADA and Automation

  Calgary, AB +1

  TélétravailTemps plein

  

  Rising Edge Group

  2+ ansCandidates need an electrical engineering degree or diploma, an active P.Eng. or PL.Eng. designation, and proficiency in medium and high voltage power engineering. Utilities experience and SCADA, protocol and cybersecurity knowledge are strong assets.

  MicroStation, AutoCAD, SEL acSELerator, Microsoft Office

  1 mois

  Senior Commissioning Technologist

  Edmonton, AB +1

  Temps plein

  

  Rising Edge Group

  4+ ansCandidates need a diploma in electrical engineering technology or an electrical engineering degree, at least 4 years of field testing and commissioning experience, and hands-on substation work from 600V to 500kV. A valid Class 5 driver's licence and willingness to travel and work rotations are required.

  Omicron test equipment, Doble M4100, Megger megohmmeter, Ductor, Dilo and SMC gas analyzers, SFRA

  1 mois

  Commissioning Technologist

  Calgary, AB +2

  Temps plein

  

  Rising Edge Group

  4+ ansCandidates need a diploma in electrical engineering technology or an electrical engineering degree, plus 4+ years of field testing and commissioning, substation experience and relay testing skills. A valid Class 5 licence and willingness to work rotations and out of town are required.

  Omicron CMC356, Doble M4100, Megger megohmmeter, Megger TTR, CT analyzer, Dilo and SMC gas analyzers

• 1 mois

  Controls Integration Specialist

  LaSalle, ON

  26–52 $/hTemps plein

  

  CenterLine (Windsor) Limited

  CenterLine needs a college or university graduate in electrical, electromechanical, mechatronics or computer programming. Candidates must have PLC or robot programming experience, know industrial communication protocols, and be legally authorized to work in Canada and travel to the USA.

  Rockwell, Siemens, Fanuc, KUKA, ABB, Yaskawa

• 1 mois

  Tool Designer

  Winnipeg, MB

  

  Magellan

  2+ ansCandidates need a mechanical engineering technologist diploma or degree plus at least 2 years of relevant experience. They must have strong fixture, die and jig design skills and CAD proficiency, with Siemens NX or Catia V5 an asset.

  CAD, Siemens NX, Catia V5, mill, lathe

• 1 mois

  Electrical Control & Instrumentation Engineerneer

  Toronto, ON

  

  Chart Industries

  5+ ansCandidates need a bachelor's degree in electrical engineering or a related field, at least five years of industrial electrical, controls or instrumentation experience, and hands-on PLC and HMI programming. Ontario P.Eng. licensure is preferred.

  AutoCAD Electrical, EPLAN, AutoCAD, Rockwell Automation, Siemens, Schneider Electric Modicon

• 1 mois

  Application Specialist - Factory Automation, Motion and Drives

  Kitchener, ON +2

  FE

  Franklin Empire Inc: Fankin Mpire est une distributeur de produit éclectiques dépendant et une entreprise familiale de quartiaime génération qui n'existe depuis 1942.

  3+ ansCandidates need prior experience selling and applying SCADA HMI, PLC, motion and drive products, plus an engineering degree or certification. They must be fluent in English, communicate well, use Microsoft Office and hold a valid driver's licence and own a car.

  Siemens Simatic PLC, Step7 Classic, Microsoft Office

15 entreprises