Emplois “Measuring and layout tools” au Canada – Page 12

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 18j

  Senior Low Temperature Device Engineer (SNSPDs)

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansXanadu needs a PhD in Physics, Electrical or Mechanical Engineering, or a related field, plus at least 2 years of postdoctoral or industry experience. Candidates need hands-on SNSPD design and cryogenic measurement experience, plus Python skills and familiarity with RF test equipment.

  Python, VNA, SMU, cryogenic measurement systems, sub-Kelvin helium cryostat, COMSOL

  18j

  Photonics Design and Control Engineer

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need an MS or PhD in Electrical Engineering, Physics or a related field, a proven record designing high-performance integrated filters, and 2+ years testing photonic integrated circuits. Strong Python and control or optimization skills are essential.

  Python

  18j

  Superconducting Analog Component Designer

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need a PhD in physics or electrical or mechanical engineering, or a closely related field, plus at least 2 years of postdoctoral or industry experience. They need strong superconducting device physics knowledge, SPICE circuit simulation skills and Python for design and data analysis.

  SPICE, Python, COMSOL, pyTDGL

• 18j

  Service Technician I

  Toronto, ON

  44–52 $/hTemps plein

  VI

  Vanderlande Industries Canada Inc.

  Candidates need an industrial electrician, construction/maintenance electrician or red seal industrial millwright licence, plus experience supporting automated systems. Strong electrical and mechanical fault-finding and the ability to read schematics and drawings are required.

  Electrical test instruments, Hand tools, Precision measuring instruments

• 18j

  Records and Information Management Manager

  New Brunswick

  GO

  Government of New Brunswick - THC

  6+ ans2+ gestionCandidates need a university degree in library and information studies, information management, archival science or IT, plus six years of related experience, two of them supervisory. Fluent written and spoken English and French is required.

  SharePoint, OpenText Content Manager, CLIFF

• 18j

  Welder/Fitter

  Oxbow, SK

  Temps plein

  I

  infraMOD

  Candidates need experience and CWB certifications for all FCAW/MCAW positions, plus the ability to read advanced blueprints and welding symbols. They also need physical stamina, steady hands, good communication skills, and the ability to spot damaged or corroded parts.

  FCAW equipment, MCAW equipment, plasma torch, oxy-fuel torch, angle grinder, saw

• 18j

  Industrial Engineer

  Mississauga, ON

  

  MAD Elevator Inc

  5+ ansCandidates need a bachelor's degree in industrial or a related engineering discipline and 5 to 8 years of manufacturing or process engineering experience. Lean methods, CNC and mechanical know-how, and strong Excel, CAD and ERP skills are required.

  Excel, CAD, ERP systems

• 18j

  Electronic Design Engineer IC - SPE

  Burlington, ON

  

  MACOM Technology Solutions Holdings, Inc.: MACOM designs and manufactures RF, microwave, millimeter wave solutions and optoelectronics for Data Center, Telecommunication, Industrial and…

  6+ ansCandidates need deep experience designing high-speed amplifiers and RF or analog ICs, strong Cadence skills, and hands-on lab testing ability. A B.S., M.S. or Ph.D. is required with 12, 10 or 6 years of IC design experience respectively.

  Cadence, ADS, HFSS, Sonnet

• 19j

  Carpenter/Formsetter

  Brighton, ON

  46,27 $/hSur placeTemps plein

  

  North America Construction (1993) Ltd. - NAC Constructors Ltd.: provides true Master Builder services to the municipal, civil, biofuel and energy marketplace.

  3+ ansCandidates need 3-5 years of heavy construction formwork experience, including advanced formwork and Symons form system experience. Valid WHMIS, Health and Safety Awareness and Working at Heights certificates are required.

  levels, measuring tapes, tamper, compactor, scaffolding

• 19j

  UI/UX Director / Directeur·rice UI/UX

  Québec, QC +1

  Temps plein

  

  Ironbelly Studios

  Expérience senior en leadership UI/UX sur jeux mobiles à succès; Expérience post-lancement et en LiveOps; Maîtrise de Figma et de Unity

  Unity, Figma

• 19j

  Field Technician- Electrical/Mechanical

  Greater Sudbury, ON

  Temps plein

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  3+ ansCandidates need 3 to 5 years in a similar role, a Red Seal Electrician Certificate or Electrical Engineering Technologist credential, and 3+ years of field service repair experience in electrical distribution. Hands-on electro-mechanical skill and the ability to read drawings and manuals are required.

  rigging equipment, vibration analysis equipment, welding equipment, PLC, test equipment

• 19j

  Manufacturing Engineer

  Smiths Falls, ON

  79k–104k $/an

  

  our team

  5+ ansCandidates need a bachelor's degree in mechanical, manufacturing or industrial engineering, about 5 years of manufacturing engineering experience, hands-on machining or fabrication skills, and CAD proficiency. Lean experience and project coordination skills are also needed.

  CAD software, CNC equipment, Industrial machinery

• 19j

  Carpenter Apprentices

  Regina, SK

  Temps plein

  GC

  Golderado Contracting Corp

  Candidates need a carpentry apprenticeship or equivalent, CSTS 2020 and WHMIS 2015, and proficient English. Being able to lift 50 lbs, work at heights in bad weather, and read technical drawings is required, with fall protection and first aid certifications as assets.

  hand tools, power tools, tape measure, scaffolding, ladders

• 19j

  Service & Install Technician

  Moncton, NB

  

  ALLMAR INC.

  1+ ansCandidates need installation and service experience in overhead doors, dock equipment or the building industry, plus a valid driver's licence. Strong communication, attention to detail and the ability to work independently and in a team are required.

  Hand tools, Power tools, Scissor lifts, Extension ladders, Service vehicle

• 19j

  Maintenance Technician- ChamClad

  Edmonton, AB

  WS

  Wausau Supply Co

  3+ ansCandidates need a diploma in electro-mechanical technology or industrial maintenance, or at least three years of industrial maintenance experience. Hands-on electromechanical skills, PLC and drive troubleshooting, and the ability to read schematics are needed, and a Red Seal or Alberta trade certification is an asset.

  CMMS, PLC, test equipment, hand tools, power tools, measuring devices

• 19j

  Applications Engineer - Project Management

  Toronto, ON

  Sur placeTemps plein

  

  Vishay Precision Group

  3+ ansCandidates need a Bachelor's in electrical, electronics or mechatronics engineering (or a technologist diploma with strong experience), 3 to 7 years in industrial environments, hands-on skills with PLCs, drives, instrumentation and industrial networks, strong project management and communication skills, a valid G-class licence and eligibility to work in Canada.

  AutoCAD, SolidWorks, MS Project, ERP/PDM systems, PLC, SCADA

• 21j

  Engineer - Ground Control

  Greater Sudbury, ON

  Temps plein

  

  Vale

  5+ ansCandidates need a bachelor's degree in geotechnical, geomechanics or rock engineering, and must be registered or eligible for registration as a P.Eng. in Canada. They need 5 to 7 years of geotechnical experience, including 4 years after P.Eng., and strong numerical modelling skills.

  FLAC3D, 3DEC, Rocscience Suite, Map3D

• 21j

  Internship - MScAC 2027

  Toronto, ON

  HybrideStage

  

  Boson AI

  Candidates need to be enrolled in the MScAC program at the University of Toronto, which is mandatory. They need strong Python programming, machine learning and deep learning experience with PyTorch or JAX, and C++, CUDA or Triton for systems projects. They must be available for the full 8-month term.

  PyTorch, JAX, CUDA, Triton, SGLang, vLLM

• 22j

  Hardware Engineer - New Grad

  Ottawa, ON

  Temps plein

  CC

  Ciena Canada ULC

  Candidates need to be working toward a bachelor's, master's or PhD in electrical engineering or a related science, with prior internship, co-op or project experience. Strong analog design skills in BiCMOS or CMOS, proficiency with Cadence, Mentor and Synopsys tools, and good English communication are required.

  Cadence Virtuoso, Calibre, STAR-RC, MMSIM, Synopsys, Mentor

• 22j

  Senior Continuous Improvement Specialist

  Edmonton, AB

  Temps plein

  

  Durabuilt Windows & Doors: Durabuilt Windows & Doors has been recognized as the #1 ENERGY STAR® certified window and door manufacturer in Canada - a distinction earned through…

  6+ ansCandidates need a bachelor's degree in an engineering discipline (or a technical diploma with equivalent senior experience), at least six years in manufacturing including two years leading improvement projects, and Lean Six Sigma Green Belt certification.

  SolidWorks, AutoCAD, FlexSim, Minitab, Excel, Power BI

• 22j

  Foreman - Fabrication

  Saskatoon, SK

  Temps plein

  

  Brandt in Canada

  10+ ansCandidates need at least 10 years of direct welding and manufacturing experience, plus blueprint reading and Microsoft Office skills. Strong analytical, communication and team skills are essential, and post-secondary education is an asset.

  Microsoft Office, flame cutting equipment, tape measure

• 22j

  Quality Electrical Engineer

  Calgary, AB

  

  SKF

  3+ ansCandidates need a bachelor's degree in an engineering discipline and 3+ years of relevant experience, plus legal eligibility to work in Canada. They should read electrical schematics, use test equipment, and apply problem-solving methods like 8D and 5-Why.

  Multimeter, Oscilloscope, Hi-pot tester, LCR meter

• 22j

  Surveyor

  Toronto, ON

  90k–110k $/an

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  3+ ansCandidates need at least 3 years of construction or geomatics surveying experience, proficiency with total stations, GNSS/RTK and data collectors, and a valid G class driver's licence. Strong safety awareness, documentation skills and leadership ability are also required.

  Total station, GNSS/RTK system, Digital level, Data collector, Leica, Trimble

• 22j

  Civil Construction Project Manager

  Port Alberni, BC

  Sur placeTemps plein

  MK

  Matcon Knappett Industries

  2+ ansCandidates need a civil engineering technology diploma or construction management degree, or equivalent experience, plus two years of applicable work. They must read plans and specifications and use Microsoft Office, MS Project, HCSS HeavyBid, PlanSwift and AutoCAD.

  HCSS HeavyBid, PlanSwift, AutoCAD, MS Project, Microsoft Office

22 entreprises