Aucun filtre correspondant. Essayez un autre nom.
Remote People
5+ ansCandidates need a mechanical or mechatronics engineering degree, 5+ years of manufacturing engineering experience, and hands-on skill in reliability, preventive and predictive maintenance, and root cause analysis. Knowledge of processing, packaging, pneumatic, steam and pumping systems is required.
CMMS, CAD
VitalBio
10+ ans5+ gestionCandidates need a bachelor's degree in chemistry, biochemistry, supply chain or a related field, plus 10+ years sourcing complex reagent bills of materials in regulated life sciences or diagnostics. They also need 5+ years of people management, strong RFP and negotiation experience, and knowledge of ISO and FDA supplier compliance.
ERP systems, Vendor management systems
VitalBio
7+ ansCandidates need a bachelor's degree in engineering, life sciences or a related field, at least 7 years of quality systems work in medical devices, and experience running ISO 13485 and FDA-compliant systems and eQMS platforms.
eQMS platform, MasterControl, Greenlight Guru, Veeva, ETQ Reliance, TrackWise
Vention
8+ ans8 à 12 ans et plus d'expérience en fabrication ou assemblage; Expérience de direction d'équipes de production à haute variété; Connaissance de l'assemblage mécanique et électromécanique
Assembly, Performance management, Supply chain management, Sales, Procurement, Leadership
Vention
5+ ansAu moins 5 ans d'expérience en assemblage, fabrication ou production; Expérience en gestion d'équipe (superviseur, chef d'équipe); Bonne compréhension des flux d'assemblage et des BOM
ERP, MES, Excel
Celestica International LP
Celestica International LP needs a third-year student in mechanical, aerospace or mechatronics engineering. Candidates should have good communication, problem-solving and MS Office skills, and basic knowledge of manufacturing systems.
SolidWorks, Excel, PowerPoint
Celestica International LP
11+ ansCandidates need 11 to 14+ years of progressive experience in electronic manufacturing, operations or supply chain, including at least 2 years in program management and 2 years in operations, engineering, supply chain or finance. A bachelor's degree is required, with an MBA or APICS CSCP/CPIM, PMP or Lean Six Sigma Black Belt preferred. Candidates must be Canadian citizens or permanent residents to meet Controlled Goods Program requirements.
ERP, Advanced Planning Systems, warehouse management software
Apotex: To report an Adverse Reaction/Experience to Apotex, or an Apotex affiliated company, please contact: [email protected].
Candidates need a bachelor's degree in business, engineering or a related field, plus Lean Six Sigma, PMP and change management credentials. They need solid project or program management experience and ideally experience in pharmaceutical manufacturing, CPG or food and beverage.
Project management software, Business databases
L3Harris Technologies
2+ ansCandidates need an engineering background in aerospace, mechanical, electrical, manufacturing or systems, with manufacturing experience in a high-tech setting. A bachelor's degree with 2 years of related experience is typical, and Lean Green Belt certification or equivalent is required.
Mechanical drawings, Electrical schematics, C#
L3Harris Technologies
1+ ansCandidates need current enrolment in an accredited engineering or computer science program in good standing with a co-op program, and must be able to complete a 16-month term starting May 2027. Asset skills include AS9100D training, Lean Six Sigma yellow or green belt, quality assurance experience in aerospace or defence, and Power Apps and Power BI experience.
Power BI, Power Apps, BPMS
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of mechanical or electro-mechanical experience, preferably with a community college mechanical technician diploma or equivalent. Lean manufacturing and ISO9000 or AS9100 experience are assets.
Thermal chamber, Vibration table, Large test equipment, Test scripts
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of electro-optical or electro-mechanical experience, preferably with an electronics, robotics or optronics/photonics college diploma. Strong skills in reading schematics, troubleshooting and attention to detail are required, and experience with Lean manufacturing or ISO9000/AS9100 quality systems is an asset.
Thermal chamber, Optical collimator, Lasers, Test equipment
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of mechanical or electro-mechanical experience, preferably a community college diploma in mechanical technology. They must read electrical and mechanical drawings, work to ISO9000 or AS9100 quality standards, and show strong teamwork and attention to detail.
Thermal chamber, Vibration table, Test equipment, Schematics
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of experience in electronics and mechanical work, a community college diploma in electronics or mechanical technology, and the ability to read electrical schematics and mechanical drawings. Lean manufacturing and ISO 9000 or AS9100 experience are assets.
thermal chamber, vibration table, test equipment
L3Harris Technologies
3+ ansCandidates need 3-5 years of mechanical or electro-mechanical experience, a community college diploma in mechanical technology or equivalent, and the ability to read electrical schematics and mechanical drawings. Lean manufacturing and ISO9000 or AS9100 experience are assets.
thermal chamber, vibration table, test equipment
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of mechanical or electro-mechanical experience, preferably a community college diploma in mechanical technology. Strong schematic reading, troubleshooting and attention to detail are required, and experience with Lean Manufacturing, ISO9000 or AS9100 is an asset.
Thermal chamber, Vibration table, Test equipment
L3Harris Technologies
Candidates need enrolment in a mechanical or electronics technician or technologist diploma program, plus electronics and mechanical background. They should be able to read drawings and schematics, use test equipment and communicate well with customers and colleagues.
Test equipment, Microsoft Excel, Microsoft Word
L3Harris Technologies
3+ ansCandidates need 3 to 5 years of mechanical or electro-mechanical experience, preferably with a community college diploma in mechanical technology. Strong schematic reading, troubleshooting, attention to detail and teamwork are required.
Thermal chamber, Vibration table, Test equipment, Schematics
MissionPerform Inc.
3+ ansCandidates need 3 to 5+ years in customer success, account management or a similar client-facing role, plus proposal or SOW writing experience. They should have escalation management experience and familiarity with CRM platforms such as Salesforce or HubSpot.
Salesforce, HubSpot, CRM platform, TheGrid
Acuity Inc.
3+ ansCandidates need three or more years across sourcing, purchasing and quality coordination, plus manufacturing experience. Lean knowledge, the ability to read engineering drawings and strong negotiation and communication skills are expected.
ERP systems, Microsoft Excel, Copilot, calipers, micrometers, multimeters
Ambico Limited: AMBICO manufactures specialized doors and door frames.
2+ ansCandidates need a college diploma in business, architecture or a related field, plus 2 to 5 years of project management experience. Knowledge of manufacturing, project management principles and the door and hardware industry is strongly preferred, and PMP, DHI courses and bilingual French and English are assets.
Project management software, CRM
Porter Engineered Systems - A Division of Pangeo Group: were acquired by Middlemarket Capital Management Company and were combined with Kadee Metalfab LLC to form Porter Group LLC.
7+ ans2+ gestionCandidates need a manufacturing, mechanical or industrial engineering degree, plus experience with IATF 16949, ISO 14001 and ISO 45001. Strong GD&T, lean and Six Sigma skills and prior team leadership are also required.
Microsoft Office, CNC machining centres, Presses, Robots, Grinders
Porter Engineered Systems - A Division of Pangeo Group: were acquired by Middlemarket Capital Management Company and were combined with Kadee Metalfab LLC to form Porter Group LLC.
7+ ansPorter Engineered Systems needs a candidate with a bachelor's degree in an engineering field and 7+ years of shop floor manufacturing engineering experience, preferably in automotive. Candidates need CAD skills, knowledge of lean and Six Sigma, strong problem-solving and communication skills, and a willingness to travel and work outside regular hours.
CAD software
Sun Gro Horticulture: Sun Gro Horticulture’s mission is to be an industry leading Growing Media Company in soilless growing mixes, serving horticultural professionals,…
7+ ansCandidates need full bilingual French and English skills, 7+ years in fast-paced manufacturing, and experience with capital projects and lean. A degree in engineering is preferred, and a PMP and a clean driver's licence are also sought.
AutoCAD, SolidWorks, CMMS, PLC
11 entreprises