Emplois “Pneumatics” au Canada – Page 20

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 15j

  Railroad Operator

  Timmins, ON

  DS

  Discovery Silver Corp

  Candidates need to be physically fit, able to work outdoors in all weather, and able to use hand and pneumatic track tools. They must have completed or recently completed CAAT and DAT testing satisfactorily, and be willing to work rotating shifts.

  Shovel, Pick, Rail tongs, Track jack, Sledgehammer, Spike maul

  15j

  Millwright

  Timmins, ON

  DS

  Discovery Silver Corp

  2+ ansCandidates need a red seal Millwright certificate, or a qualified apprenticeship, plus at least 2 years of experience. A CWB all-position welding certification or the ability to be trained is also required, along with completed or recent CAAT and DAT testing.

  Computer maintenance management systems, Hydraulic equipment, Pneumatic equipment

• 15j

  Lab Infrastructure Technician

  Toronto, ON

  Sur placeTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  Candidates need college, apprenticeship or equivalent industrial maintenance experience, especially with air compressors, pneumatic networks and high-pressure systems. They also need strong safety awareness, problem-solving skills, and clear technical writing.

  air compressor, vacuum pump, 3D printer, HVAC system, hand tools, power tools

• 15j

  Cable Assembler

  Kanata, ON

  21–25 $/hSur placeTemps plein

  RR

  Renaissance Repair and Supply

  Candidates need hands-on experience in electronic assembly, good hand-eye coordination and close attention to detail. They must read schematics and production documents, write clear records, and be safety-minded. An electronics technician diploma is an asset.

  Pneumatic tools, Hand tools

• 15j

  Specialist Mechanical Engineer

  North Bay, ON

  150k–170k $/anTélétravailTemps plein

  CC

  Cementation Canada

  15+ ansCandidates need a Canadian mechanical engineering degree, a P.Eng. registration in Canada and 15+ years of mechanical engineering experience in mining or heavy construction. Strong design knowledge across material handling, ventilation, piping, hydraulics and hoisting, plus experience across the full project lifecycle, is required.

  Autodesk, MS Office, MS Project, Mechanical analysis software

• 15j

  Mechanical Designer - Automation Systems

  Ancaster, ON

  70k–120k $/anTemps plein

  F

  FPS-Services

  3+ ansCandidates need a mechanical engineering degree or diploma, 3+ years of hands-on automation design experience, and strong SolidWorks skills. Knowledge of pneumatics, electrical sensing devices and engineering drawings is also required.

  SolidWorks

• 15j

  Millwright

  Woodstock, ON

  Temps plein

  

  OSCO

  4+ ansCandidates need a licensed journeyman or class 433A certification, or a four-year apprenticeship or four years of direct millwright experience, plus a valid G driver's licence. Strong diagnostic, welding, communication and supervisory skills are needed.

  Hoists, Lift trucks, Lathe, Hand tools, Power tools, Micrometers

• 15j

  101617 - Equipment Operator

  Saskatchewan

  Temps plein

  GO

  Government of Saskatchewan

  Candidates need a valid Class 1A driver's licence and experience with heavy equipment such as graders and snowplows. They should know workplace safety, traffic control and basic mechanical, hydraulic and electrical systems, and have strong communication and teamwork skills.

  Tandem truck, Snowplow, Loader

  15j

  Equipment Operator

  Prince Albert, SK

  Sur place

  GO

  Government of Saskatchewan

  Candidates need a valid Class 1A driver's licence and knowledge of heavy equipment operation, maintenance and basic mechanical and hydraulic systems. Strong safety, traffic control and teamwork skills are expected.

  motor grader, tandem truck, hydro drum, spinner, snowplow, wing attachment

• 15j

  Press/Forge Engineering Technician

  Ingersoll, ON

  

  IMT CORPORATION

  5+ ansCandidates need at least 5 years of press or forging experience with hands-on equipment operation and troubleshooting. Technical training in a related field is preferred, and Canadian citizenship or permanent residency is required.

  MS Excel, MS Word

  15j

  Industrial Millwright - 433A

  Port Colborne, ON

  

  IMT CORPORATION

  3+ ansCandidates need an Ontario 433A Millwright certificate, at least 3 years of industrial maintenance experience, and skills in bearings, hydraulics, pneumatics, pumps, gearboxes, alignment and blueprint reading. Heavy physical work, overtime and emergency breakdown response are expected.

  dial indicators, laser alignment systems, hydraulic schematics, overhead cranes, forklift

  15j

  Industrial Electrician

  Port Colborne, ON

  

  IMT CORPORATION

  3+ ansCandidates need a valid Ontario Industrial Electrician (442A) Certificate of Qualification, industrial maintenance experience (3-5 years preferred), and strong troubleshooting skills with PLCs, VFDs, motors and sensors. A valid driver's licence and comfort in heavy industrial settings are required.

  PLC systems, VFD, Allen-Bradley, Siemens, HMI, infrared pyrometer

• 15j

  Millwright

  Woodstock, ON

  Temps plein

  EW

  Enterprise Wide

  4+ ansCandidates need a licensed journeyman or Class 433A certification, or a four-year apprenticeship or four years of direct millwright experience. They must read blueprints, weld, detect machinery faults, lift up to 100 lbs and work in hot and cold conditions.

  Hoists, Lift trucks, Micrometers, Jacks, Lathe, Hand tools

• 15j

  Instrument & Electrical Technician

  Edmonton, AB

  Temps plein

  AC

  AP Canada Ltd.

  Candidates need dual-ticket certification as a Journeyperson Instrumentation Technician and Journeyperson Electrician (Red Seal required), a valid Alberta Class 5 licence with a clean driving record, and willingness to work overtime and on-call. Industrial plant maintenance experience and PLC or DCS knowledge are preferred.

  SAP PM, Microsoft Office, HART communicator, TREX communicator, multimeter, megger

• 15j

  Shop QA/QC

  Calgary, AB

  Sur placeTemps plein

  AG

  Alstar Group: Alstar specializes in facility construction, prefabrication, field installation and facility construction.

  2+ ansCandidates need CWB Level 1 certification, 2+ years of quality control experience, and a Common Safety Orientation ticket. A solid understanding of ASME and CSA codes and a strong commitment to safety are also required.

  Welding inspection equipment, Pressure test equipment

• 15j

  Webber - AZ/DZ Seasonal Equipment Operator (Guaranteed Hours) - Mimico - Infrastructure Management

  Etobicoke, ON

  26,50–28,50 $/hTemps plein

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  1+ ansCandidates need a high school diploma or equivalent and at least one year of road maintenance, construction or equipment operating experience. A valid Ontario Class DZ licence is required and an AZ licence is an asset.

  Snow plow, Tractor, Grader, Mower, Sweeper, Auger

• 15j

  Technicien.ne menuiserie - OVO | Carpentry Technician - OVO

  Canada

  Sur placeTemps plein

  

  Cirque du Soleil Entertainment Group: Building on four decades of pushing the boundaries of the imagination, the Company brings its creative approach to a large variety of entertainment…

  2+ ansDisponibilité pour tournées internationales à temps plein; DEC en production de spectacles ou expérience équivalente; Au moins deux ans comme menuisier de scène

  AutoCAD, SOLIDWORKS, Microsoft Office, plateformes élévatrices, outils électriques, équipement lourd

• 15j

  Maintenance Mechanic

  Belleville, ON

  38–42 $/h

  

  Sofina Foods Inc

  2+ ansSofina Foods needs candidates with at least 2 years of experience as an industrial or commercial millwright, a Red Seal Millwright licence, and the ability to lift 50 pounds, stand for long periods and work in extreme heat or cold. Candidates must be legally entitled to work in Canada and communicate in English.

  hydraulic equipment, pneumatic equipment, electrical equipment

• 15j

  Maintenance Operator(Instrumentation)

  Pickering, ON

  51,33 $/hTemps plein

  

  Regional Municipality of Durham

  Candidates need an Instrument and Control certificate of qualification (447A) or an Industrial Electrician certificate (309A) with instrumentation experience, plus a Class 1 Water/Wastewater Treatment Certificate. They also need several years of electronic systems experience, an Ontario Class G licence, and strong communication skills.

  SCADA, PLC, calibration equipment, test equipment, wiring diagrams

• 15j

  Site Maintenance Technician

  Prescott, ON

  

  Manpower

  Candidates need working knowledge of hand and power tools, mechanical systems, pneumatic systems, hydraulics, carpentry and masonry. They must troubleshoot well, work alone or in a team, and stay organized when priorities change.

  hand tools, power tools

• 15j

  Assembly Technician – Heavy Equipment and Tooling

  Brantford, ON

  19–21 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of assembly, machine fabrication or industrial manufacturing experience, plus comfort with pneumatic and power tools. They must be able to stand for full shifts and lift 30 to 50 lbs, and hold a high school diploma or technical training.

  pneumatic torque wrench, drills, precision gauges, hand tools

• 15j

  Field Service Technician

  Calgary, AB

  TélétravailTemps plein

  

  Wabtec: Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services.

  5+ ansCandidates need five years of industrial or mobile heavy equipment mechanic experience, strong knowledge of pneumatic, hydraulic and electrical systems, and the ability to read schematics. A valid driver's licence and passport are required, and French is preferred.

  Schematics

• 15j

  AME Avionics Apprentice

  Kelowna, BC

  38,03 $/h

  

  KF Aerospace

  Candidates need graduation from a Transport Canada accredited Approved Aircraft Maintenance Avionics Program, the ability to obtain a Transport Canada Airport Pass, and basic computer and mechanical skills. Physical fitness and the ability to work rotating shifts are also required.

  hand tools, test equipment

• 15j

  Warehouse Technician

  Calgary, AB

  Sur placeTemps plein

  DT

  Daimler Truck Canada Ltd.

  Candidates need a high school diploma or equivalent, the ability to lift up to 75 pounds frequently, and a commitment to safety and quality. Experience operating forklifts and reach lifts is valued, along with flexibility and clear communication.

  forklift, reach truck, order picker, stand-up reach lift, propane lift, battery changing equipment

20 entreprises