Emplois “pneumatic tools” au Canada – Page 21

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Press Operator (Rotating Shift)

  Burlington, ON

  

  Precision Record Pressing Inc

  Candidates need a high school diploma or equivalent (preferred), previous manufacturing experience (preferred), strong attention to detail, good communication skills, and the ability to stand for long periods, lift up to 50 lbs occasionally and work all shifts and overtime. CSA steel-toed safety boots are mandatory. Candidates must be legally authorized to work in Canada without sponsorship.

  vinyl press, extruder, hydraulic press, pneumatic press

  26j

  Press Operator (Night Shift)

  Burlington, ON

  

  Precision Record Pressing Inc

  Precision Record Pressing needs candidates who can stand for long shifts, do repetitive hand work, and lift up to 50 lbs occasionally in an open, weather-exposed environment. A high school diploma is preferred, previous manufacturing experience is preferred, and CSA steel-toed boots are mandatory. Candidates must be willing to work all shifts and overtime and communicate well in writing, electronically and orally.

  Vinyl presses, Extruders, Hydraulic presses, Pneumatic presses

• 26j

  Stair Builder

  Airdrie, AB

  Temps plein

  

  Zytech Buildings Systems

  1+ ansZytech Buildings Systems needs candidates with at least one year of carpentry, framing or related experience. Candidates must be able to use hand and pneumatic tools, read a tape measure, do basic math, lift up to 50 lbs, and read, write and understand English.

  Tape measure, Pneumatic tools, Hand tools

• 26j

  Millwright

  Mission, BC

  

  Silver Hills Bakery

  1+ ansCandidates need at least one year of relevant millwright experience and a Red Seal Millwright certification. Strong mechanical, math and problem-solving skills, computer skills and good communication are also needed.

  hoist, crane, lathe, grinder, hand tools, power tools

• 26j

  Service Technician - Okanagan

  Vancouver, BC

  HybrideTemps plein

  MC

  Medline Canada Corporation: Medline Canada is part of the largest provider of medical-surgical products and supply chain solutions serving all points of care.

  3+ ansCandidates need at least 3 years of equipment repair experience, ideally across mechanical, electrical, electronic, pneumatic, hydraulic or plumbing work. They also need a valid driver's licence, strong customer service and communication skills, and the ability to work with limited supervision.

  hand tools, small power tools

• 26j

  Equipment & Small Engine Mechanic

  Surrey, BC

  27–40 $/hSur placeTemps plein

  BA

  Bothwell Accurate Co

  2+ ansCandidates need 2 to 5+ years of engine and equipment maintenance experience, ideally in construction, industrial or manufacturing. A trade certification is required, and a valid Class 5 licence with a clean record is needed; Red Seal or Licensed Mechanic designation and forklift certification are assets.

  forklift, crane, SiteDocs, WorkMax, Microsoft 365

• 26j

  Manufacturing Technician

  Peterborough, ON

  Sur placeTemps plein

  

  GeoSpectrum Technologies, Inc: specializes in underwater acoustic transducers and systems.

  Candidates need a post-secondary diploma or relevant workplace experience, with formal trades training preferred. They should read engineering documents quickly, use computers well, and have strong attention to detail and problem-solving skills. Marine systems and WHMIS or OHS certification are assets.

  hand tools, power tools, measurement equipment, schematics, routing cards, bills of materials

• 26j

  Manufacturing Process Engineer

  Canada

  Temps plein

  SA

  Stelumar Advanced Manufacturing Inc.: (Stelumar) is a technology-driven company dedicated to revolutionizing homebuilding in Canada through advanced modular building solutions.

  5+ ansCandidates need a bachelor's degree in engineering or a related field and 5+ years of relevant experience, including setting up manufacturing facilities. They should be proficient in Excel, MES and ERP systems, CAD tools, technical drawings and industrial automation.

  SolidWorks, AutoCAD, Revit, MES, ERP, Microsoft Excel

  26j

  Manufacturing Process Engineer

  Canada

  Temps plein

  SA

  Stelumar Advanced Manufacturing Inc.: (Stelumar) is a technology-driven company dedicated to revolutionizing homebuilding in Canada through advanced modular building solutions.

  5+ ansCandidates need a bachelor's degree in engineering or a related field and 5+ years of relevant experience, including setting up manufacturing facilities. They should be proficient in Excel, MES and ERP systems, CAD tools, technical drawings and industrial automation.

  SolidWorks, AutoCAD, Revit, MES, ERP, Microsoft Excel

• 26j

  Mechanical Assembly Technician

  Markham, ON

  Temporaire

  

  Manpower

  5+ ansCandidates need at least 5 years of precision or custom machinery assembly experience and a college certificate, apprenticeship or equivalent in mechanical trades. They must read engineering and pneumatic drawings, operate forklifts, and bring their own precision measuring tools.

  forklift, pallet jack, micrometers, height gauge, power tools, hand tools

  26j

  (Millwright) Maintenance Technician

  Toronto, ON

  35–40 $/hTemporaire

  

  Manpower

  5+ ansCandidates need a high school diploma, with trade school training preferred, and 1 to 3 years in manufacturing or maintenance (the posting also asks for 5 to 6 years). They need strong hand and machine tool skills, mechanical systems knowledge, troubleshooting ability and teamwork, and must be able to lift 50 lbs.

  PLC, HMI, hand tools, machine tools

• 26j

  Robotic/CNC Field Service Engineer - Multiple Locations

  Mississauga, ON

  63k–102k $/an

  

  FANUC America

  3+ ansCandidates need a high school diploma or GED, with an associate's degree in a technical field preferred. Three or more years of robotics, automation or manufacturing experience is preferred, along with a valid driver's licence and the ability to lift 75 lbs and travel for extended periods.

  FANUC application software, Schematics, Diagnostic instruments

  26j

  Associate Field Service Engineer - CNC Sourcing Req

  Mississauga, ON

  52k–83k $/an

  

  FANUC America

  2+ ansCandidates need a high school diploma and an associate's degree in mechatronics, automation or a related field, with a bachelor's preferred. Two years of customer-focused technical experience in CNC or automation is preferred, along with a valid driver's licence and the ability to lift 75 lbs.

  CNC machines, Servo drives, Spindle drives, PLC, Microsoft Excel, Microsoft Word

• 26j

  Journeyperson Mobile Mechanics

  Goderich, ON

  53,65 $/hTemps plein

  

  Compass Minerals: Compass Minerals (NYSE: CMP) is a leading global provider of essential minerals focused on safely delivering where and when it matters to help solve…

  Candidates need a high school diploma and a valid trade licence such as 433A Industrial Mechanic (Millwright) or 421A Heavy Duty Equipment Technician, plus a provincial driver's licence. Mining or heavy industrial mechanical experience and hydraulic system skills are required.

  Microsoft Word, Microsoft Excel, Microsoft PowerPoint, hoists, rigging equipment

• 26j

  Inspector

  Fort Erie, ON

  

  FLEET CANADA INC: Housed in a 500,000 square foot manufacturing facility, Fleet is a proudly Canadian owned and operated Aerospace Manufacturer that specializes in…

  1+ ansCandidates need a high school diploma and 1 to 3 years of aerospace or precision manufacturing inspection experience. They must read engineering drawings and use micrometers, calipers and gauges, and know quality systems and regulatory standards.

  Micrometers, Calipers, Gauges

• 26j

  Millwright night shift

  Kitchener, ON

  42,70 $/h

  

  Dare Foods Limited: Dare has been a proudly Canadian, family-owned company since 1889.

  5+ ansCandidates need a 433A Industrial Millwright License, hands-on troubleshooting of hydraulic, pneumatic and mechanical equipment, and welding and machining skills. Experience in a food-related maintenance setting and good communication skills are strongly valued.

  lathe, milling machine, grinder, hand tools, scissor lift, ladder

  26j

  Millwrights afternoon shift

  Kitchener, ON

  42,70 $/h

  

  Dare Foods Limited: Dare has been a proudly Canadian, family-owned company since 1889.

  5+ ansCandidates need a 433A Industrial Millwright License and strong troubleshooting skills for hydraulic, pneumatic and mechanical equipment. Experience in a food-related maintenance setting, welding and machining, and teamwork in a fast-paced environment are also wanted.

  lathe, milling machine, grinder, hand tools, scissor lift, ladder

• 26j

  Millwright

  Toronto, ON

  41,25–43,50 $/hTemps plein

  QT

  QuickHires Talent Solutions Inc

  2+ ansCandidates need a Red Seal Industrial Millwright 433A licence, 2-5 years of industrial mechanical experience (food industry preferred), and hands-on skill with pneumatics, hydraulics and machine shop work. They also need problem-solving and communication skills, comfort with computers, and the ability to lift up to 50 lbs and work rotating shifts.

  Lathe, Welding equipment, Hand and power tools

• 26j

  Maintenance Mechanic

  British Columbia

  47,88 $/hTemps plein

  

  Metro Vancouver: Metro Vancouver also regulates air quality, plans for urban growth, manages a regional parks system and provides affordable housing.

  4+ ansCandidates need a Grade 12 education, a Heavy Duty Mechanic or Millwright trades qualification, and at least four years of mechanical repair experience. Strong skills in machine fitting, welding, pipefitting, diesel and large pump repair, and computerized maintenance systems are required, along with a valid B.C. driver's licence.

  CMMS, lathe, milling machine, micrometer, torque wrench, gas cutting torch

• 26j

  Millwright

  Nisku, AB

  40 $/hContrat

  

  Randstad Canada

  Randstad Canada needs a valid Alberta Journeyperson Millwright ticket or Red Seal certification, solid experience overhauling heavy rotating machinery and gearboxes, and hydraulics troubleshooting skills. Candidates also need clear English communication and the ability to start on short notice.

  laser alignment tools, hydraulic test equipment

• 26j

  Journeyperson Pipefitter

  Quesnel, BC

  Temps plein

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a Red Seal Pipefitter certification, a Class 5 driver's licence and heavy industry experience. They must work safely, communicate well and work independently with little supervision.

  Cutting torch, Pipe cutter, Pipe cutting machine, Threading machine, Pipe bending tools, Hammer and chisel

• 26j

  TOOLMAKER - MOLD MAKER

  Boucherville, QC

  30–34 $/h

  HP

  HMB Pro Services / HMB INNOVATION INC

  5+ ansCandidates need a machining diploma (DEP), at least 5 years in a plastic manufacturing environment as a toolmaker or machinist, and skill with complex drawings, precision machining, measuring instruments and SolidWorks.

  lathe, milling machine, surface grinder, reamer, SolidWorks, measuring instruments

• 26j

  433A Millwright

  Arthur, ON

  43,86 $/h

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  3+ ansCandidates need a valid 433A Millwright licence, 3+ years of industrial or manufacturing experience and a valid G class driver's licence. Strong troubleshooting skills, hydraulics, pneumatics, welding and a strong commitment to safety are also required.

  Hand tools, Power tools, Welding equipment, Fabrication equipment

  26j

  Millwright

  Burlington, ON

  43–46 $/h

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  3+ ansCandidates need a 433A Millwright licence and 3 to 5 years of mechanical maintenance experience, ideally in metal processing or high-volume fabrication. They must be able to work rotating 12-hour shifts and pay close attention to detail.

  PLC, hydraulic equipment, pneumatic equipment, welding equipment, machining equipment

18 entreprises