Emplois “Siemens systems” au Canada – Page 24

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Field Service Representative

  Carp, ON

  Sur placeTemps plein

  

  BluMetric Environmental Inc.

  4+ ansCandidates need at least four years of electrical field experience, PLC and HMI experience with Allen-Bradley, Automation Direct or Siemens, and a valid driver's licence. A valid electrician licence (309A or 442A) or equivalent degree is an asset, and reliability security clearance is required.

  Allen-Bradley PLC, Siemens PLC, Automation Direct PLC, HMI, VFD, Control valves

• 1 mois

  JC Boiler - Industrial Combustion & Boiler Service Technician

  Nisku, AB

  Sur placeTemps plein

  

  Intricate Group: Regulatory services provider of consulting, field services and software

  Candidates need a valid Alberta Journeyperson Gasfitter Class B, hands-on burner and combustion troubleshooting experience, working knowledge of electrical controls, and a valid driver's licence. Oil-and-gas or industrial service experience and a willingness to travel and take on-call duty are also required.

  burner management system, combustion analyzer, PLC, VFD

• 1 mois

  Concepteur mécanique / Mechanical Designer

  Montréal, QC

  Sur placeTemps plein

  

  Taiga Motors

  5+ ansDiplôme technique ou certification en conception mécanique, dessin ou CAO; Plus de 5 ans d'expérience dans un poste similaire; Maîtrise de la CAO et de la gestion d'assemblage (Siemens NX préféré)

  Siemens NX

• 1 mois

  Field Services Technician - Remote

  Toronto, ON

  TélétravailTemps plein

  

  Sky Eye Measurement Inc.

  3+ ansCandidates need 3 to 7 years of field experience with mechanical and electrical equipment, plus a Journeyperson certification in Electrical, Instrumentation or Millwright trades. A valid Class 5 licence with a clean driver's abstract and a valid passport are required.

  Toptech, Siemens HMI/PLC, Scully overfill systems, Dixon grounding systems, Digital diagnostic tools

• 1 mois

  Automation Specialist - Fly in/Fly out - Texas & New Mexico

  Calgary, AB

  Sur place

  

  Crimson Group

  5+ ansCandidates need five or more years of PLC and HMI design and programming in oil and gas, plus commissioning and troubleshooting experience. Crimson Group also requires a valid driver's licence with a clean abstract and the ability to travel and work away from home.

  Wonderware System Platform, GE iFix, Citect, Factory Link, Telvent, Rockwell Allen Bradley

• 1 mois

  Control Systems Engineer

  Ottawa, ON

  Sur placeTemps plein

  PT

  Proslide Technology: ProSlide designs and manufactures the world’s most sought-after, award-winning water park rides, meticulously engineered to deliver the speed,…

  2+ ansCandidates need a bachelor's degree in electrical, control systems or automation engineering and at least 2 years of control systems experience in safety-critical settings. They must know Rockwell and Siemens PLC platforms, industrial network protocols and applicable safety standards.

  RSLogix 5000, Studio 5000, STEP 7, TIA Portal, HMI

• 1 mois

  Controls Programmer

  Newmarket, ON

  Sur placeTemps plein

  IG

  Innovative Group of Companies

  2+ ansCandidates need a diploma in electrical engineering or equivalent specialized experience, plus at least 2 years in automation or automotive manufacturing. Experience with Rockwell Studio 5000, Siemens TIA Portal and Omron CX-One or Sysmac Studio is required, and robot programming for ABB or Fanuc is an asset.

  Rockwell Studio 5000, Siemens TIA Portal, Omron CX-One, Omron Sysmac Studio, ABB robot, Fanuc robot

• 1 mois

  Gestionnaire de projet Digital Twin / Digital Twin Project Manager

  Montréal, QC

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  10+ ansDiplôme en ingénierie, gestion de projet ou informatique; 10 à 12 ans d'expérience en livraison numérique ou gestion de projet; Expérience avec le BIM, le SIG, l'IoT

  Bentley iTwin, Autodesk Tandem, ESRI GeoBIM, Siemens, NVIDIA Omniverse, Dassault Systèmes 3DX

  1 mois

  Spécialiste Digital Twin

  Montréal, QC

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  5+ ans5 à 10 ans en ingénierie numérique ou BIM/SIG; Diplôme en ingénierie, géomatique ou informatique; Maîtrise de Revit, Civil 3D, ArcGIS ou QGIS

  Revit, Civil 3D, OpenRail, ArcGIS, QGIS, Bentley iTwin

  1 mois

  Instrumentation and Controls Technician

  Montréal, QC +1

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  3+ ansCandidates need a DEP or equivalent in instrumentation, control, or automation, and more than 3 years of instrumentation and controls experience. Bilingual French and English is required, with working knowledge of platforms such as Rockwell, Siemens, and Wonderware, plus AutoCAD and AutoCAD Electrical.

  AutoCAD, AutoCAD Electrical, Microsoft Office, PLC, HMI, SCADA

  1 mois

  Ingénieur(e) Sénior en Instrumentation et Automatisation des procédés (Lead)

  Montréal, QC +1

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  15+ ansBaccalauréat en génie électrique ou production automatisée; Membre de l'Ordre des ingénieurs du Québec; Minimum de 15 ans d'expérience pertinente

  Rockwell, Siemens, Schneider, Honeywell, Emerson, DCS

  1 mois

  Ingénieur(e) en commande et protection

  Montréal, QC

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  10+ ansBaccalauréat en génie électrique; Membre de l'Ordre des ingénieurs du Québec; Minimum 10 ans d'expérience pertinente

  ETAP, ASPEN, EasyPower, PSCAD, EMTP, SCADA

  1 mois

  Ingénieur(e) en Instrumentation et Contrôle

  Québec, QC +2

  Temps plein

  AC

  AtkinsRéalis Canada Inc.

  8+ ansBaccalauréat en génie électrique ou en génie de la production automatisée; Membre de l'Ordre des ingénieurs du Québec; 8 à 10 ans d'expérience en automatisation et contrôle

  PLC, HMI, SCADA, Rockwell, Siemens

• 1 mois

  Electronics Engineer (III)

  Waterloo, ON

  Temps plein

  TD

  Teledyne Digital Imaging, Inc.

  5+ ansCandidates need at least 5 years of related experience with a Bachelor's degree, or 3 years with a Master's, or a PhD. They need hands-on circuit design, PCB schematic entry, oscilloscope and multimeter skills, and knowledge of I2C, SPI, UART, USB and Ethernet.

  Siemens PADS, oscilloscope, multimeter, soldering iron

• 1 mois

  Control Systems Developer

  Pickering, ON

  Temps plein

  

  AtkinsRéalis

  Candidates need an engineering degree in electrical engineering, computer science or software engineering, and eligibility to be registered as a Professional Engineer in Ontario. Strong Siemens PLC programming experience, clear technical writing and shift work availability are required.

  Siemens TIA Portal, WinCC Flexible, PELCO Endura

  1 mois

  Controls and Software Technologist

  Pickering, ON

  Temps plein

  

  AtkinsRéalis

  Candidates need a post-secondary technical degree or equivalent experience, Siemens PLC and SCADA programming skills, and knowledge of nuclear quality assurance and engineering change control. Shift work is required.

  Siemens Step 7, WinCC, PROFIBUS, PELCO Endura, Microsoft Office, Visio

• 1 mois

  PLM Senior Analyst

  Montréal, QC +4

  HybrideTemps plein

  AI

  Accenture Inc Company

  2+ ansCandidates need at least 2 years of aerospace experience and 1 year of professional work with a major PLM system such as PTC, Dassault Systèmes, Siemens or SAP-PLM. They also need a bachelor's degree or equivalent experience, strong process and communication skills, and English.

  PTC, Dassault Systèmes, Siemens, SAP-PLM

• 1 mois

  Test Engineer

  Markham, ON

  Temps plein

  

  Multimatic Technical Centre

  1+ ansCandidates need a relevant engineering degree or diploma, 1-3 years of automotive testing experience (co-op or internship accepted), and a solid understanding of automotive systems and test methods. Strong communication and organization skills are also needed.

  DAQ systems, MATLAB, LabVIEW, Siemens Testlab, NI DIAdem, MTS MPT

  1 mois

  Teamcenter PLM Developer (Active Workspace)

  Markham, ON

  Temps plein

  

  Multimatic Technical Centre

  5+ ansCandidates need five or more years of hands-on Teamcenter experience in production, including Active Workspace configuration and administration. A bachelor's degree in a related discipline and strong communication skills are also required.

  Siemens Teamcenter, Teamcenter Active Workspace, BMIDE, Teamcenter Rich Client, Teamcenter Dispatcher Client, NX

• 1 mois

  Senior Instrumentation Control and Electrical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  8+ ansCandidates need a bachelor's degree in an electrical, controls, instrumentation, software, mechatronics or computer engineering field, plus at least 8 years of relevant experience. Strong hands-on skills with Siemens PLCs, SCADA/HMI, LabVIEW and industrial networks are required.

  Siemens TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware, PROFINET

  1 mois

  Intermediate Instrumentation Control and Electrical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  4+ ansCandidates need a bachelor's degree in an engineering discipline and at least 4 years of relevant experience in controls, automation or electrical work. Siemens PLC, HMI/SCADA and LabVIEW skills, plus commissioning and field experience, are strongly preferred.

  Siemens TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware, Microsoft Visio

• 1 mois

  Switchgear Application Specialist

  Langley, BC

  Sur placeTemps plein

  TT

  Thomson Technology Power Systems ULC

  10+ ansCandidates need a bachelor's degree or equivalent in electrical or power engineering and 10+ years in power systems, including 5+ years hands-on with switchgear, ATS and control systems. OEM field service experience, PLC and HMI knowledge and willingness to travel are needed.

  Microsoft Office, Service management system, ERP system, PLC, HMI

• 1 mois

  Fire Service Technician III

  Ottawa, ON

  Temps plein

  TT

  TIF Tyco Integrated Fire & Security Canada, Inc.

  2+ ansCandidates need a high school diploma, a valid CFAA certification and at least two years of fire alarm experience across several vendors. They also need working computer skills, strong customer service, the ability to do physical work at heights and in tight spaces, and a valid driver's licence.

  Fire alarm control panels, Ladders, Scaffolding, High lift equipment, Microsoft Word, Microsoft Excel

• 1 mois

  Boiler Technician (Gas A)

  Vancouver, BC

  71,43 $/hTemps plein

  JC

  Johnson Controls LP CAN

  5+ ansCandidates need five years of electrical, control and boiler field experience, a Class A Gas ticket, and a mechanical and electrical background. They must read schematics, troubleshoot boilers without schematics, and know Honeywell, Fireye and Siemens boiler controls.

  PLC, wiring diagrams, schematics

16 entreprises