Emplois “Robot controller” au Canada – Page 26

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 28j

  OmniaBio: Administrative Coordinator

  Hamilton, ON

  CF

  Centre for Commercialization of Regenerative Medicine

  3+ ansCandidates need a bachelor's degree or equivalent experience and 3 to 5+ years of administrative, executive support, or event coordination experience. They need advanced Microsoft 365 skills, strong organization and discretion, and comfort with approved AI tools.

  Microsoft 365, Outlook, Teams, Word, PowerPoint, Excel

  28j

  OmniaBio: Associate I Quality Assurance (MQA)

  Hamilton, ON

  CF

  Centre for Commercialization of Regenerative Medicine

  1+ ansCandidates need a high school diploma plus college courses in science or engineering, and 1-2 years of GMP quality experience in cell therapy, biologics or a similar regulated industry. They must understand Health Canada and FDA GMP regulations and QA principles.

  MasterControl

  28j

  OmniaBio: Manufacturing Support Technician

  Hamilton, ON

  CF

  Centre for Commercialization of Regenerative Medicine

  Candidates need a college diploma or higher, strong English communication, and prior work experience, with manufacturing documented-procedure experience preferred. They must be able to lift 20 pounds and be legally eligible to work in Canada.

  SAP

  28j

  OmniaBio: Compliance Associate (Environmental Monitoring and Manufacturing) 12-month contract

  Hamilton, ON

  CF

  Centre for Commercialization of Regenerative Medicine

  5+ ansCandidates need at least 5 years in a GMP bio/pharmaceutical CDMO environment, with compliance, documentation or technical experience, plus a 3-year engineering or technical college credential or equivalent experience. Strong English communication and a flexible schedule are required.

  SAP, electronic QMS, environmental monitoring systems, equipment maintenance management systems, building automation systems

• 28j

  Automation - Automation Technician - Continental Night (7:30pm - 7:30am)

  Toronto, ON

  PI

  Polytainers, Inc.

  3+ ansPolytainers needs a candidate with 3 to 5 years of technical experience in a fast-paced, high-volume lean manufacturing setting, with strong mechanical ability and a high school diploma. Injection molding or food packaging experience, camera and vision system experience, and post-secondary automation training are preferred.

  IML robots, take-out robots, vision inspection system, HMI, servo drives, encoders

• 28j

  Automation Technician

  Lindsay, ON

  

  Mariposa Dairy: Mariposa Dairy Ltd is a food production company based out of 201 St George St, Lindsay, ON, Canada.

  3+ ansCandidates need a diploma or degree in engineering, automation, mechatronics or a related skilled trade, plus at least 3 years of automation or controls experience in manufacturing. Strong knowledge of robotics, sensors, industrial networking, electrical and mechanical systems is needed.

  HMI, Robotics systems, Diagnostic tools

• 28j

  MAINTENANCE - ELECTRICIAN

  Guelph, ON

  40–45 $/h

  

  Poly-Nova Technologies

  3+ ansPoly-Nova Technologies needs candidates with a 442A industrial electrician licence and 3 to 5 years of multi-trade manufacturing maintenance experience. Hands-on troubleshooting across mechanical, electrical, hydraulic, pneumatic and PLC systems is required, with injection molding experience an asset.

  PLC, forklift, crane, scissor lift, hoist, blueprints

• 28j

  Building Maintenance (Full Time)

  Ontario

  28,61 $/h

  

  GRANITE CLUB

  Candidates need oral and written English, general maintenance knowledge and use of hand and small power tools, and general knowledge of building trades. Basic refrigeration certification (ORFA) is preferred, and candidates must be comfortable working at heights and lifting up to 80 lbs.

  Zamboni, tractor, RTV, snow blower, leaf blower, golf cart

• 28j

  Layout Site Surveyor

  Vancouver, BC

  40–45 $/h

  

  Bosa Construction

  2+ ansBosa Construction needs at least two years of layout surveying experience on commercial or multi-residential sites. Candidates need experience with total stations and GPS, a robotic total station and basic AutoCAD skills, and a Class 5 licence or reliable transportation.

  Robotic total station, Total station, GPS, AutoCAD

• 28j

  Senior System Test Engineer

  Canada

  Temps plein

  

  LanceDB

  10+ ansCandidates need 10+ years in software engineering or test infrastructure, including distributed or large-scale data systems. They need strong Python and a systems language, plus fault injection, performance testing and skilled use of AI coding tools.

  Linux, Kubernetes, CI/CD systems, Parquet, Apache Arrow, DataFusion

• 28j

  Total Rewards Manager/Gestionnaire de la rémunération globale

  Brampton, ON +1

  120k–140k $/anTemps plein

  

  MDA

  8+ ansBaccalauréat en RH, finances, administration ou domaine connexe; Au moins 8 ans d'expérience en rémunération globale ou 5 ans comme consultant; Expertise en architecture des postes et structures salariales

  Shareworks

  28j

  Inspector - Mechanical

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  2+ ansCandidates need a college diploma or vocational diploma in electronics, mechanics or aeronautics, plus two to five years of relevant experience. They must read plans, understand tolerances, know IPC-A-610 and IPC-A-620, and have good French.

  ERP system, Micrometer, CMM, Production databases

• 28j

  Registered Nurse, 11 East & West Inpatient Surgery

  Ontario

  

  Humber River Health: North America's first fully digital hospital, serving the northwestern GTA.

  Candidates need current registration with the College of Nurses of Ontario and BCLS certification. Acute medical/surgical experience is required, and experience with pain management techniques, IV therapy and patient teaching is preferred.

  Meditech, computerized documentation systems, bedside computer terminals

• 28j

  Maintenance Supervisor

  Brampton, ON

  GA

  Give and Go Foods

  5+ ans5+ gestionCandidates need at least 5 years of maintenance supervisory experience in a manufacturing environment, with food or baking experience an asset. Strong troubleshooting, mechanical and electrical knowledge, and PLC and automation skills are required, along with CMMS and Microsoft Office proficiency.

  CMMS, Dayforce, Microsoft Excel, Microsoft Word, PLC

  28j

  Maintenance Supervisor

  Vaughan, ON

  GA

  Give and Go Foods

  5+ ans5+ gestionGive and Go Foods needs candidates with at least 5 years of maintenance supervisory experience in a production or manufacturing setting, ideally in food or baking. Candidates need strong troubleshooting skills, advanced knowledge of mechanical and electrical systems, and experience with PLCs, automation and facility maintenance.

  CMMS, PLC, Microsoft Excel, Microsoft Word, Dayforce, Bulk handling system

  28j

  Senior Automation Technician

  Toronto, ON

  GA

  Give and Go Foods

  5+ ansGive and Go Foods needs candidates with 5 to 10 years of industrial automation or controls maintenance experience, hands-on PLC and robotics troubleshooting, and a 442A Industrial and Maintenance Electrical License. Candidates must read electrical schematics and ladder logic and work with CMMS and SAP.

  PLC, HMI, VFD, servo motor, robot, CMMS

  28j

  Maintenance Manager

  Brampton, ON

  GA

  Give and Go Foods

  7+ ans7+ gestionCandidates need at least 7 years of maintenance management experience in a production environment, ideally in food or baking. A valid Ontario Millwright or Electrician licence is required, and strong mechanical, electrical, PLC and troubleshooting skills are essential.

  CMMS, PLC, Microsoft Excel, Microsoft Word

• 28j

  Senior Automation Specialist

  Mississauga, ON

  45–55 $/hTemps plein

  SP

  Spark Power

  15+ ansCandidates need at least 15 years of industrial automation or controls experience, with strong PLC and HMI programming skills. They must read electrical schematics, know VFDs, servo systems and industrial networking, and hold a valid driver's licence.

  PLC, HMI, SCADA, VFD, Servo, Vision system

• 28j

  Electro-Mechanical Technician

  Burnaby, BC

  

  Kodak: A leading global manufacturer focused on commercial print and advanced materials & chemicals.

  2+ ansCandidates need at least 2 years of experience manufacturing complex electromechanical products, with both assembly and integration experience. They need strong mechanical troubleshooting, PCB-level electronics repair, soldering skills, and familiarity with cable and pneumatic routing.

  CAD drawings, pneumatic drawings

• 28j

  Staff Security Engineer

  Télétravail au Canada

  Télétravail

  

  Robots and Pencils: The company has earned recognition as an AWS Advanced Tier Services Partner, an AWS Pattern Partner, and an AWS Business Value Realization partner.

  7+ ansCandidates need 7+ years of security or software engineering experience, including 3+ years leading application and cloud security work. They also need deep AWS IAM, Kubernetes security, production Python and Terraform skills, and experience securing AI systems.

  AWS, GCP, Kubernetes, Terraform, Python, Athena

• 28j

  Automation Electrical Engineer

  Esterhazy, SK

  Temps plein

  MP

  Mosaic Potash Esterhazy Limited Partnership

  Candidates need an engineering bachelor's degree, preferably in electrical or electronic systems, and 0 to 8+ years of industrial control experience depending on level. Registration with APEGS (working toward P. Eng.) is required for the senior level, and experience with Rockwell PLC and HMI systems is needed.

  Rockwell PLC, Rockwell HMI, Wonderware, MS Office

• 28j

  Monteur / Ajusteur – Moulage par injection plastique

  Granby, QC

  28–35 $/hSur placeTemps plein

  

  Go RH

  3+ ansDEP en mécanique ou en électromécanique; 3 à 5 ans d'expérience en moulage par injection plastique; Connaissances en électricité, hydraulique et pneumatique

  Sepro robots, KraussMaffei presses, LS presses, Engel presses

• 28j

  Specialist Instrumentation, Control & Electrical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  Candidates need a bachelor's degree in an electrical, controls or related engineering discipline and extensive progressive experience in automation. Advanced skills in Siemens PLCs, WinCC, LabVIEW and industrial networks are required, and a nuclear security clearance must be obtainable.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware

  28j

  Electrical Technician/Technologist – Working Level

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a diploma in electrical engineering technology, instrumentation and controls, or electromechanical technology, plus five to eight years of industrial electrical or automation experience. Hands-on panel wiring, electrical testing and troubleshooting skills are required, while Siemens PLC, LabVIEW and forklift or crane experience are assets.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, multimeter

16 entreprises