Emplois “gauges” au Canada – Page 27

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Press Operator

  Breslau, ON

  20–22 $/hContrat

  

  Randstad Canada

  Candidates need a high school diploma or equivalent industrial experience, a valid driver's licence and a reliable vehicle, and strong attendance and references. Prior stamping press or automotive experience is preferred but not required, and CSA-approved steel-toed boots are needed.

  Stamping press, Measuring tools, Gauges, Forklift, Internal tracking system

  1 mois

  Production Operator - Plastics Manufacturing

  Brantford, ON

  26,46 $/hTemps plein

  

  Randstad Canada

  1+ ansCandidates need Grade 12 or equivalent, one year of forklift experience (no licence required), the ability to wear a respirator with a clean-shaven face, and the ability to work continental shifts.

  Twin screw extruder, Ribbon blender, High-intensity mixer, Drum tumbler, Forklift, Grinder

  1 mois

  Electrical assembler

  Dorval, QC

  21–27 $/hContrat

  

  Randstad Canada

  Candidates need the ability to read complex electrical schematics and technical drawings, good manual dexterity with hand and power tools, and the physical ability to stand for long periods and lift up to 50 lbs. Strict adherence to safety standards and PPE use is required.

  Hand tools, Power tools, Assembly equipment

  1 mois

  CAN-Edmonton- Electrical Assembler

  Edmonton, AB

  Contrat

  

  Randstad Canada

  1+ ansCandidates need high school completion or equivalent, the ability to lift heavy materials, and legal authorization to work in Canada without sponsorship. Electrical engineering diploma, prior electrical testing experience, manufacturing assembly experience and forklift or overhead crane certification are assets.

  Wiring tools, Fixtures, Gauges, Forklift, Overhead crane

  1 mois

  Blender Operator

  Kitchener, ON

  29 $/hTemps plein

  

  Randstad Canada

  1+ ansCandidates need at least one year of active forklift experience, comfort wearing a respirator with a clean-shaven face, and the ability to work in a smoke-free site. Two to three years of manufacturing or logistics experience is preferred.

  forklift, high-intensity mixer, ribbon blender, drum tumbler, respirator

  1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  24 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of industrial painting or sandblasting experience, including epoxy and enamel work and use of DFT gauges. A respirator fit test, the ability to lift 50 lbs and reliable transportation are also required.

  Conventional spray equipment, DFT gauge, Sandblasting equipment

  1 mois

  Electrical Assembler - Edmonton

  Edmonton, AB

  Contrat

  

  Randstad Canada

  1+ ansCandidates need to be authorized to work in Canada without sponsorship, have a high school diploma or GED, and be able to lift heavy materials. Electrical engineering diploma, electrical control testing experience, and forklift or overhead crane certification are assets.

  Fixtures, Gauges, Wiring tools, Forklift, Overhead crane

  1 mois

  Manufacturing Engineer - Automotive Industry

  Concord, ON

  80k–90k $/anTemps plein

  

  Randstad Canada

  5+ ansCandidates need a university degree in mechanical engineering or a related technical field, plus 5–7 years of automotive engineering experience (4 years considered). They should have hands-on experience with stamping, CNC and robotic equipment, and knowledge of APQP, PFMEA, GD&T, 8D and SPC.

  SolidWorks, DraftSight, CNC equipment, Robotic controls

  1 mois

  Brake Press Operator - Night Shift

  Brantford, ON

  26–29 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need 1 to 3 or more years of brake press experience in metal fabrication, the ability to read blueprints, and skill with precision measuring tools. They must be available for the night shift, lift up to 50 lbs, and wear CSA-approved steel-toed boots.

  CNC brake press, hydraulic brake press, calipers, micrometers, height gauges, protractors

  1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  19,94–21,97 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on industrial painting or sandblasting experience, with conventional spray application and epoxy or enamel coatings. They must read fabrication drawings, use DFT gauges, pass a respirator fit test, lift up to 50 lbs, and have reliable transportation for an early start.

  DFT gauge, spray equipment, sandblaster, respirator

  1 mois

  Production worker- NIGHTS

  Oakville, ON

  19 $/hContrat

  

  Randstad Canada

  Candidates need steel-toed safety footwear, the ability to lift 30-50 lbs at times (sharing heavy lifts is allowed), and tolerance for warm-to-hot working conditions. They must be available for afternoon and night shifts.

  furnace, process gauges

  1 mois

  Wire Cutting Associate

  Kingston, ON

  20,50 $/hContrat

  

  Randstad Canada

  Candidates need attention to detail, basic math with measurements and fractions, and the ability to read order documents. Warehouse or wire-cutting experience is an asset, and the job involves lifting up to 50 lbs and standing for long periods.

  wire-cutting equipment, WMS

  1 mois

  Machine Operator

  Burlington, ON

  23,50 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of experience operating machinery in a manufacturing or industrial setting. They need to use hand tools and measuring tools such as calipers and gauges, and strong problem-solving and attention to detail are required.

  Calipers, Gauges, Manufacturing machinery, Manual hand tools

  1 mois

  Welder Fitter

  Hamilton, ON

  30–35 $/hContrat

  

  Randstad Canada

  5+ ansCandidates need at least 5 years of custom fabrication experience as a Welder Fitter, proven ability to read blueprints and weld symbols, and hands-on experience with overhead cranes and heavy rigging. CWB tickets for metal-core and stick welding are a strong asset.

  overhead cranes, rigging equipment

  1 mois

  Logistics Coordinator - Shipping Line

  Montréal, QC

  58k–63k $/anTemps plein

  

  Randstad Canada

  Candidates need experience with over-the-road shipments, ideally from a freight forwarder, 3PL, trucking or shipping line. They must be based in or around Montreal, multitask time-sensitive work, and stay organized under tight deadlines.

  Logistics, Supply chain management, Dispatching, Communication skills

  1 mois

  Production worker- Afternoons

  Oakville, ON

  19 $/hContrat

  

  Randstad Canada

  Candidates need steel-toe safety boots, the ability to lift 30 to 50 lbs at times and push or pull carts, and comfort working in warm to hot conditions. They must be available for afternoon and night shifts.

  Automotive production machinery, Process gauges, Carts

  1 mois

  Production worker- NIGHTS

  Oakville, ON

  19 $/hContrat

  

  Randstad Canada

  Candidates need steel-toed safety footwear, the ability to lift 30-50 lbs at times (sharing heavy lifts is allowed), and tolerance for warm-to-hot working conditions. They must be available for afternoon and night shifts.

  furnace, process gauges

  1 mois

  Production worker- NIGHTS

  Mississauga, ON

  19 $/hContrat

  

  Randstad Canada

  Candidates need steel-toed safety footwear, the ability to lift 30-50 lbs at times (sharing heavy lifts is allowed), and tolerance for warm-to-hot working conditions. They must be available for afternoon and night shifts.

  furnace, process gauges

  1 mois

  Machine operator

  Brantford, ON

  21 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least 1 year of machine operating experience in a food manufacturing or industrial facility, plus a high school diploma or GED. Strong English reading and speaking skills, knowledge of GMP and HACCP, mechanical aptitude and the ability to lift 50 lbs are also required.

  packaging equipment, filling machine, conveyor, mixing vat, sealing equipment, hopper

  1 mois

  CNC Machine Operator - Night Shift

  Brampton, ON

  23–24,50 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need two to five years of hands-on lathe and milling experience, the ability to read blueprints, and skill with micrometers, height gauges, dial indicators and calipers. Randstad Canada also expects a stable work history, clear English communication and an awareness of safety and Lean principles.

  CNC lathe, CNC milling machine, Micrometers, Height gauges, Dial indicators, Calipers

• 1 mois

  Repair mechanic & Balancer - Etobicoke ON

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  Candidates need a mechanical trade, machining or maintenance background, and experience with rotating industrial equipment is strongly preferred. They must read blueprints, use precision measuring tools, and be able to travel to the USA for training after hire.

  micrometers, calipers, dial indicators, bore gauges, manual milling machine, drill press

  1 mois

  Repair Assessment Technician - Etobicoke ON

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  3+ ansCandidates need mechanical training or equivalent vocational qualification and 3 to 5 years of inspection, maintenance or repair experience on industrial machinery. Precision measuring skills, drawing interpretation and dye penetrant testing experience are strongly preferred.

  micrometers, calipers, bore gauges, depth gauges, dial indicators, cranes

  1 mois

  Manual Lathe machinist - Etobicoke ON

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  3+ ansGEA Canada needs candidates with 3 to 5 years of manual machining experience, especially on lathes, plus training in metrology. Strong measurement skills, the ability to read technical drawings, and attention to detail are essential.

  Manual lathe, Manual milling machine, Drill press, Horizontal grinding machine, Micrometers, Bore gauges

  1 mois

  Manual Lathe Machinist - Etobicoke ON

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  3+ ansCandidates need 3 to 5 years of hands-on manual machining experience, strong lathe skills and training in metrology. GEA Canada Inc. also expects the ability to read technical drawings and work carefully to micrometer-level tolerances.

  manual lathe, manual milling machine, drill press, horizontal grinding machine, micrometer, bore gauge

2 entreprises