Emplois “AutoCad” au Canada – Page 29

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 7j

  Technicien·ne en génie électrique

  Québec, QC

  HybrideTemps plein

  

  Artelia

  5+ ansDEC en génie électrique ou équivalent; Minimum de 5 ans d'expérience en systèmes de feux ou éclairage; Connaissance du C.N.B. et du Code de l'électricité du Québec

  AutoCAD, MicroStation, AGI32, Microsoft Office, BIM

• 7j

  Vancouver - Senior Electrical Designer

  Vancouver, BC

  H

  Hatch

  10+ ansCandidates need an electrical engineering diploma, at least ten years of electrical design experience on large multidisciplinary projects, and 3D design skills. Proficiency in MicroStation or AutoCAD and knowledge of applicable codes such as IEEE, CSA, NEC and CEC are also required.

  MicroStation, AutoCAD, OpenPlant, MicroStation PSDS, Bentley BRCM

• 7j

  Material Project Coordinator

  Airdrie, AB

  Temps plein

  

  PSL

  Candidates need the ability to read P&IDs, isometric and CAD drawings, strong Microsoft Office and Excel skills, and attention to detail. Good communication, time management, the ability to work outdoors and lift up to 20 lb are also required.

  Excel, Outlook, Word, Teams, Navisworks, SharePoint

• 7j

  Architecte paysagiste

  Montréal, QC

  HybrideTemps plein

  

  Stantec

  3+ ansBaccalauréat ou maîtrise en architecture du paysage; 3 à 5 ans d'expérience pertinente; Membre de l'AAPQ ou en voie de le devenir

  AutoCAD, Adobe Illustrator, Adobe InDesign, Adobe Photoshop, Revit, Rhino

• 7j

  Electrical Field Engineer

  St. John's, NL

  Temps plein

  G

  GIP

  Candidates need an electrical engineering or technology diploma or degree, or equivalent construction experience. Knowledge of the Canadian Electrical Code, Microsoft Office, a valid driver's licence and willingness to travel and work rotational or night shifts are required.

  AutoCAD, Microsoft Excel, Microsoft Word

  7j

  Mechanical Field Engineer

  St. John's, NL

  Temps plein

  G

  GIP

  Candidates need a degree or diploma in mechanical engineering or technology, or equivalent practical mechanical construction experience. They should read P&IDs and drawings, know mechanical codes and construction methods, use Microsoft Office, and hold a valid driver's licence.

  AutoCAD, Microsoft Excel, Microsoft Word

• 7j

  Engineer In Training-TS001

  London, ON

  

  City of London

  Candidates need P.Eng. Engineer-in-Training registration with PEO and a Bachelor of Engineering or Applied Science in civil, environmental, chemical, mechanical or equivalent. GIS and engineering software such as AutoCAD, InfoWorks and HEC-RAS are an asset.

  AutoCAD, InfoWorks, EPASWMM, GIS, Microsoft Office

• 7j

  Concepteur ou conceptrice d'interfaces graphiques en automatisation du bâtiment

  Québec, QC

  Temps plein

  I

  Integriti

  Integriti needs candidates fluent in French, proficient in AutoCAD and Revit, with graphic or technical drafting experience and basic knowledge of building mechanical systems. Strong visual design skills, rigor, autonomy and good time management are required.

  AutoCAD, Revit, Photoshop

• 7j

  BIM Coordinator, MEP

  Toronto, ON

  Sur placeTemps plein

  OT

  Ontario Transit Group

  8+ ansCandidates need a bachelor's degree in engineering or a related technical field and at least 8 years of MEP coordination experience. Strong hands-on Revit and AutoCAD skills and fluent English are required, and railway or large infrastructure experience is an advantage.

  Revit, AutoCAD, MS Office

• 7j

  Laser Cutting Operator - North York

  Ontario

  19–20,50 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of industrial laser cutting experience, plus experience with Trotect SP 1500 or PS400 machines and CAD or CorelDRAW software. They must be able to inspect dimensions, troubleshoot minor machine issues, work at a fast pace, speak English and collaborate well. A clear criminal record check is required.

  Trotect SP 1500, Trotect PS400, AutoCAD, CorelDRAW, Laser cutting machine

• 7j

  Ingénieur Usine

  Laval, QC

  Sur placeTemps plein

  

  Howmet Aerospace: Howmet Aerospace Inc., headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace…

  Candidates need industrial maintenance and equipment reliability experience, knowledge of continuous improvement methods, and strong analysis, leadership and project management skills. Bilingual French-English and proficiency in Microsoft Office and AutoCAD or SolidWorks are required.

  Microsoft Office, AutoCAD, SolidWorks

• 7j

  Ingénieur(e) civil(e) - Énergie renouvelable

  Montréal, QC

  Temps plein

  W

  WSP

  3+ ansBaccalauréat en génie civil; Titre d’ingénieur auprès de l’OIQ (obligatoire); Minimum de trois ans d’expérience en infrastructures civiles

  AutoCAD Civil 3D, AutoCAD, ArcGIS

  7j

  Technicien(ne) concepteur(trice) en électricité - Hydroélectricité & Barrages

  Québec, QC +6

  Temps plein

  W

  WSP

  Candidates need a college diploma in electrical engineering or an equivalent program and solid electrical design experience. AutoCAD and Hydro-Québec standards and MPI/CPI software are assets, along with consulting or energy project experience and an ASP Construction card.

  AutoCAD, MPI, CPI

  7j

  Dessinateur(trice) électrique

  Québec, QC

  Temps plein

  W

  WSP

  2+ ansCandidates need a DEP in drafting or equivalent CAD/DAO training and at least 2 years of electrical drafting or CAD experience, ideally in engineering consulting or energy projects. AutoCAD proficiency is required, and Revit, Inventor or Catia experience is an asset.

  AutoCAD, Revit, Inventor, Catia

• 7j

  Space Technologist

  Guelph, ON

  UO

  University of Guelph

  2+ ansCandidates need a three-year community college diploma in architectural technology, interior design, engineering technology, building science or a related field, plus at least two years of relevant experience. They must be proficient in AutoCAD, BIM tools and Excel, and know applicable building codes and space measurement standards.

  AutoCAD, BIM tools, Microsoft Excel, Microsoft Office, Archibus

  7j

  Facilities Renewal Technician

  Guelph, ON

  UO

  University of Guelph

  Candidates need a three-year community college diploma in construction or architectural technology and proficiency in estimating, reading construction plans and specifications, and site service locating. Strong knowledge of building codes, AutoCAD and MS Office is also required.

  AutoCAD, RS Means, MS Office, Adobe Photoshop, Adobe Illustrator

• 7j

  Lead Substation Engineer 2 - Grid

  Calgary, AB

  Temps plein

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  10+ ansCandidates need a science or engineering degree, 10 or more years of high-voltage substation protection and control experience, and a PE or P.Eng licence. They also need relay and design software skills (SKM, ETAP, AutoCAD or similar), knowledge of IEEE, ANSI and NEC standards, and strong written and verbal communication.

  SKM, ETAP, ASPEN, CDEGS, AutoCAD, MicroStation

• 7j

  Le ou la Superviseur(e) en Automatisation et Systèmes de Contrôle - Supervisor, Automation & Control System

  Montréal, QC

  Temps plein

  HA

  HRB Ardent Mills ULC

  6+ ans6 ans et plus d'expérience pertinente en automatisation; Solide expérience Allen-Bradley / Rockwell; Connaissance de RSLogix, Studio 5000 et iFIX

  Allen-Bradley PLC, RSLogix 500, RSLogix 5000, Studio 5000, iFIX, AutoCAD

• 7j

  Civil / Environmental Engineer

  Burnaby, BC

  75k–105k $/anHybrideTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  2+ ansCandidates need at least 2 years of project management experience and a bachelor's degree in a relevant engineering discipline. Preferred: 4+ years in civil, environmental or geotechnical work, strong technical writing, AutoCAD Civil 3D skills, and a valid driver's licence.

  AutoCAD Civil 3D, AutoCAD, MS Office, Excel, Word

• 7j

  CAD Technician

  Calgary, AB

  Sur placeTemps plein

  

  Canadian Fiber Optics Corp

  2+ ansCandidates need a CAD or drafting diploma or equivalent training, at least 2 years of drafting experience and strong AutoCAD skills in 2D and 3D. They also need Microsoft Office proficiency, knowledge of CAD standards, and familiarity with GIS, GPS and SHP files.

  AutoCAD, Microsoft Excel, Microsoft Word, GIS, GPS

• 7j

  Project Manager

  Cambridge, ON

  

  ATS Automation: ATS’ reputation, knowledge, global presence and standard automation technology platforms differentiate the Company and provide competitive…

  3+ ans3+ gestionCandidates need a post-secondary diploma or engineering degree in electronics, electrical, mechanical or controls, plus experience managing automation projects over $10 million with multidisciplinary teams. A PMP designation is an asset, along with strong customer, leadership and problem-solving skills.

  AutoCAD, Spreadsheets

• 7j

  Automation Sales Specialist – Warehouse Systems & Automation

  Brampton, ON

  65k–85k $/an

  LM

  Leavitt Machinery

  3+ ansCandidates need 3+ years in warehouse automation, material handling or technical sales, with hands-on knowledge of automation technologies such as AMRs, conveyors and AS/RS. A valid driver's licence and willingness to travel locally are required.

  AutoCAD, CRM, Microsoft Office, WMS, ERP

• 7j

  Mechanical Engineering - Student Designer

  Calgary, AB

  

  MCW Group of Companies: is a leading Canadian Energy Services Company (ESCO), qualified nationally under the Federal Buildings Initiative (FBI), member of Energy Service…

  Candidates need to be currently enrolled in a Mechanical Engineering or Mechanical Engineering Technology program. AutoCAD or Revit experience is an asset, along with Microsoft Office skills, good communication and teamwork.

  AutoCAD, Revit, Microsoft Excel, Microsoft Word, Microsoft Teams, Microsoft Outlook

  7j

  Electrical Engineering - Student Designer

  Calgary, AB

  

  MCW Group of Companies: is a leading Canadian Energy Services Company (ESCO), qualified nationally under the Federal Buildings Initiative (FBI), member of Energy Service…

  Candidates need to be currently enrolled in Electrical Engineering or Electrical Engineering Technology. Familiarity with AutoCAD or Revit is an asset, along with Microsoft Office skills and a team-based, deadline-driven approach.

  AutoCAD, Revit, Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Microsoft Outlook

19 entreprises