Emplois “gas and instrument lists” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 13j

  Senior Mechanical Engineer - Rotating Equipment

  Calgary, AB

  75–90 $/hTemps plein

  K

  Kent

  10+ ansCandidates need a mechanical engineering bachelor's degree, a P.Eng. with APEGA, and 10+ years of rotating equipment experience. Strong knowledge of API, ASME and ISO standards, pump hydraulics, seals and vibration analysis is also required.

  P&ID, datasheets, vibration analysis systems

  23j

  I&C and Telecom Supervisor

  Calgary, AB

  Temps plein

  K

  Kent

  15+ ansKent needs a candidate with a bachelor's degree or diploma in an engineering discipline, a P.Eng., and 15+ years of I&C experience in energy or industrial sectors. Strong leadership, planning, communication and knowledge of CSA, ISA, IEC and NEC/CEC standards are also required.

  Engineering design software, Document management systems

• 13j

  Senior Project Engineer, Energy

  Calgary, AB

  Temps plein

  W

  WSP

  10+ ansCandidates need a relevant engineering degree and P.Eng. registration with APEGA, or eligibility for it. They need 10+ years of energy-industry experience, ideally EPC or consulting, with natural gas facility design knowledge and familiarity with CSA Z662 and ASME B31.3.

  ESRI What if?, Natural gas, Leadership, Decision making, Procurement, P.Eng.

  14j

  Project Engineer, Energy

  Calgary, AB +2

  Temps plein

  W

  WSP

  7+ ansCandidates need a relevant engineering degree and P.Eng. registration in Alberta or eligibility for it, with 7 to 10 years of energy industry experience. They need project engineering experience on compressor stations or gas facilities, plus knowledge of CSA Z662, ASME B31.3 and Alberta regulations.

  ESRI What if?, Natural gas, Documentation, Procurement, P.Eng., Leadership

• 13j

  Instrumentation and Communication Work Leader

  Surrey, BC

  

  FortisBC: FortisBC is a Canadian-owned company based in British Columbia.

  8+ ansCandidates need a technologist diploma in electronics engineering technology, ABSTBC technologist certification, and BC Electrical Branch IN or LO accreditation. Eight years of directly related experience, strong leadership, and a valid BC driver's licence are also required.

  SCADA, telemetry equipment, gas testing equipment, calibration instruments, drawings

• 13j

  Intermediate I&C Engineer (Contract)

  Calgary, AB

  

  Trans Mountain: Trans Mountain Corporation operates Canada’s only pipeline system transporting oil products to the West Coast.

  7+ ansCandidates need a bachelor's degree in an engineering discipline, P.Eng. designation or eligibility in Alberta or British Columbia, and 7+ years of instrumentation and controls experience, preferably in oil and gas or pipelines. Strong knowledge of PLC, SCADA, DCS, RTU and safety instrumented systems is required.

  PLC, SCADA, DCS, RTU, Safety Instrumented Systems

• 14j

  Senior Power Systems Engineer

  Fredericton, NB +2

  HybrideTemps plein

  

  Stantec

  15+ ansCandidates need a bachelor's degree in electrical engineering and a Professional Engineer licence in a Canadian province, eligible for licensing in NB, NS or NL. They need at least 15 years of electrical design experience, protection and control knowledge, and hands-on power system analysis software experience.

  ETAP, EasyPower, CYME, CDEGS, SKM Power*Tools, digital multifunction protection relays

• 14j

  HazMat Field Driver/Technician - AZ - CANADA

  Beamsville, ON

  Temps plein

  

  s Refining Systems Inc: Republic Services provides the most complete set of recycling, waste and environmental solutions from a single provider.

  Candidates need a Class AZ commercial driver's licence with hazardous material and tanker endorsements, or the ability to get them within 90 days of hire. Strong attention to detail and the ability to juggle multiple responsibilities are also needed.

  box truck, tractor-trailer, roll-off truck, tanker, gravel train, mobile applications

• 14j

  HazMat Field Driver/Technician - AZ - CANADA

  Beamsville, ON

  Temps plein

  MR

  Mors Refining Systems Inc

  Candidates need a Class AZ commercial driver's licence with hazardous material and tanker endorsements, or the ability to get them within 90 days of hire. Strong attention to detail, good customer communication and the ability to handle many duties at once are also needed.

  Straight trucks, Tractor-trailers, Tankers, Roll-off trucks, Mobile applications

• 15j

  Sr. SIS Engineer

  Vancouver, BC

  140k–180k $/anTemps plein

  

  Randstad Canada

  7+ ansCandidates need an engineering degree, preferably in instrumentation, controls, electrical or chemical engineering, and a P.Eng. or eligibility for B.C. registration is preferred. They need 7 to 10 years of functional safety, SIS, BMS or process controls experience, including SIL determination, SRS development and PHA, HAZOP and LOPA studies.

  Yokogawa ProSafe-RS

• 15j

  Application Engineer - Partial Discharge Diagnostics, Level III / IV, NA Region (f/m/x)

  Toronto, ON

  Temps plein

  

  OMICRON: OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable.

  7+ ansCandidates need 7 or more years of high-voltage testing and PD measurement experience, plus a Bachelor's degree in electrical, electronics or physics engineering. Strong communication, customer consultation and mentoring skills are required, and travel up to 50% is expected.

  Microsoft Outlook, Microsoft Excel, Microsoft PowerPoint

  15j

  Application Engineer - Partial Discharge Diagnostics, Level I / II, NA Region (f/m/x)

  Toronto, ON

  TélétravailTemps plein

  

  OMICRON: OMICRON is an international company that works passionately on ideas for making electric power systems safe and reliable.

  Candidates need a Bachelor's degree in electrical, electronics or physics engineering, plus interest in power systems and PD diagnostics. Level II candidates need 3 to 7 years of hands-on high-voltage testing experience, and strong English communication and presentation skills are required.

  Technical support, Customer service, GIS, Troubleshooting, PD, Data analysis

• 15j

  Refrigeration Mechanic

  Manitoba

  Temps plein

  

  City of Winnipeg

  2+ ansCandidates need a Red Seal Refrigeration and Air Conditioning Mechanic certificate, a Red Seal Gas Fitter ticket and MOPIA certification, plus two years of commercial and industrial refrigeration installation experience. Strong computer, blueprint-reading and communication skills are also required.

  Microsoft Outlook, Microsoft Excel, Microsoft Word

• 15j

  Senior Safety Instrumented System Engineer II

  Burnaby, BC

  140k–180k $/anTemps plein

  

  Parkland Refining BC Ltd.

  7+ ansCandidates need an engineering degree, ideally a P.Eng. or eligibility for BC registration, and 7-10 years in SIS, instrumentation or functional safety. They need hands-on SIL determination, SRS development and PHA/HAZOP/LOPA experience, plus knowledge of IEC 61508, IEC 61511 and CSA B149.3.

  Yokogawa ProSafe-RS

• 15j

  Automation Engineer-In-Training

  Calgary, AB

  Temps plein

  TP

  TransCanada PipeLines Limited

  1+ ansCandidates need a bachelor's degree in an engineering discipline and must be registered or eligible for registration with APEGA as an Engineer-in-Training. They need 1 to 4 years of relevant engineering experience, strong problem-solving skills, and an interest in automation, controls or OT.

  PLC, HMI, SCADA, ControlLogix, ControlWave Micro, Rx3i

• 16j

  Process Engineer, Intermediate - JP

  Vancouver, BC +1

  Temps plein

  

  Solaris Management Consultants Inc

  7+ ansCandidates need a chemical engineering bachelor's degree and 7 to 10 years of LNG engineering, design or operations experience. Solaris also wants knowledge of LNG regulations and licensor technologies, strong communication skills, and proficiency with process simulation software. P.Eng. or PE registration is an asset.

  Aspen HYSYS, Aspen Plus, UniSim, ProMAX, Pipeflo, KORF

• 16j

  In-Fab Maintenance Technical Officer

  Ottawa, ON

  

  National Research Council Canada

  2+ ansCandidates need a post-secondary technical, engineering or scientific education and two to six years of hands-on experience with semiconductor or photonic manufacturing equipment, cleanroom support and hazardous gas or chemical handling. They must also hold Reliability Status and be available for night or weekend shifts.

  CVD equipment, MOCVD equipment, etch equipment, metrology equipment, photolithography equipment, CAD software

• 17j

  Procurement Manager

  Edmonton, AB

  Sur placeTemps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  10+ ans5+ gestionCandidates need at least 10 years of procurement or supply chain experience in industrial construction, EPC or energy, including 5 years leading procurement teams. Strong commercial and contract skills, Microsoft Office proficiency and the ability to travel are required.

  Microsoft Excel, Microsoft Word, Microsoft PowerPoint, procurement systems, enterprise systems

  17j

  Procurement Manager

  Edmonton, AB

  Temps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  10+ ans5+ gestionCandidates need at least 10 years of procurement or supply chain experience on industrial or energy projects and 5 years in a procurement leadership role. Strong commercial, contract and tendering skills, and advanced Microsoft Office skills, are required. A supply chain designation or degree is preferred.

  Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Procurement systems, Enterprise systems

• 20j

  Senior – Instrumentation Engineer – P.Eng. - Burlington Office

  Burlington, ON

  Temps plein

  

  TWD Technologies Ltd.: TWD is a leading global engineering firm focusing on traditional and transitional energy projects and innovative infrastructure projects.

  10+ ansCandidates need a bachelor's degree in an engineering discipline, 10+ years of instrumentation and controls experience, and hands-on SmartPlant Instrumentation experience. A P.Eng. designation or eligibility is required, along with knowledge of DCS, PLC and SIS systems.

  Hexagon SmartPlant Instrumentation, DCS, PLC, SIS

• 20j

  Cryogenic Systems Engineer II [639]

  Burnaby, BC

  Sur placeTemps plein

  

  D-Wave Quantum

  3+ ansCandidates need a bachelor's degree in mechanical engineering, physics or a related field, plus 3+ years with cryogenic, vacuum or gas handling equipment. They also need experience changing hardware under engineering change control and strong independent problem-solving.

  Python

• 21j

  Sr. Electrical Designer- Kiewit Power Engineering

  Calgary, AB

  Temps plein

  

  Kiewit: With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and…

  8+ ansCandidates need at least 8 years of electrical design experience, ideally with power generation projects. They need hands-on experience with underground designs, cable tray, grounding and lighting, plus SmartPlant 3D and MicroStation or AutoCAD.

  SmartPlant 3D, MicroStation, AutoCAD

• 22j

  Intelligent P&ID Systems Specialist

  Calgary, AB

  Temps plein

  

  Vista Projects Limited: Vista Projects is an integrated industrial engineering firm that helps clients navigate the digital transformation of their projects and operations.

  5+ ansVista Projects Limited needs candidates with 5+ years of engineering or design experience, hands-on Autodesk Plant 3D P&ID experience, and a sound grasp of P&ID conventions and structured engineering data. An engineering or technical education, strong Excel skills, and practical use of AI tools are also required.

  Autodesk Plant 3D P&ID, AVEVA, SmartPlant P&ID, Bentley AutoPlant, CADWorx, Microsoft Excel

• 22j

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  

  General Fusion Inc

  5+ ansCandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years designing and commissioning control systems. Strong panel wiring, PLC programming in IEC 61131-3 languages, knowledge of the Canadian Electrical Code and CSA panel standards, and grounding and noise practices are required.

  Beckhoff TwinCAT, PLC, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical

20 entreprises