Emplois “electrical testing tools” au Canada – Page 31

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 8j

  Journeyman Electrician

  Saint John, NB

  Temps plein

  

  OSCO

  Candidates need a Red Seal or Journeyman Electrician Certificate, commercial and industrial experience, and a valid driver's licence. They must be able to bend, climb, lift up to 50 lbs and work independently with minimal supervision.

  Electrical hand tools, Power tools, Electrical testing devices

  8j

  Journeyman Electrician

  Saint John, NB +1

  Temps plein

  

  OSCO

  Candidates need a Red Seal or Journeyman Electrician Certificate, experience in commercial and industrial settings, and a valid driver's licence. They must be able to lift up to 50 lbs, climb and kneel, and work independently with little supervision.

  electrical hand tools, electrical power tools, electrical testing devices

  8j

  Journeyman Electrician

  Saint John, NB +1

  Temps plein

  

  OSCO

  Candidates need a Red Seal or Journeyman Electrician certificate, experience in commercial and industrial settings, and a valid driver's licence. They must be able to lift up to 50 lbs, climb and kneel, and work independently with little supervision.

  Electrical hand tools, Electrical power tools, Testing devices

• 8j

  Student Summer Employment - Fundy National Park - Trades Helper

  Alma, NB

  PC

  Parks Canada - New Brunswick Field Unit

  Candidates need to be registered as a full-time or part-time secondary or post-secondary student, with general semi-skilled labour experience. They must hold valid First Aid and CPR, a driver's licence, and Reliability Status, and must be able to lift up to 50 lbs and work at heights.

  ladders, paint equipment, sampling equipment

• 8j

  Journeyman Electrician

  Saint John, NB

  Temps plein

  EW

  Enterprise Wide

  Candidates need a Red Seal or Journeyman Electrician Certificate, commercial and industrial experience, and a valid driver's licence. They must be able to lift up to 50 lbs, climb and kneel, and work independently.

  hand tools, power tools, electrical testing devices

  8j

  Journeyman Electrician

  Saint John, NB +1

  Temps plein

  EW

  Enterprise Wide

  Candidates need a Red Seal or Journeyman Electrician certificate, commercial or industrial experience, and a valid driver's licence. They must be able to lift up to 50 lbs, climb and kneel, and work independently with minimal supervision.

  hand tools, power tools, electrical testing devices

  8j

  Journeyman Electrician

  Saint John, NB +1

  Temps plein

  EW

  Enterprise Wide

  Candidates need a Red Seal or Journeyman Electrician Certificate, commercial and industrial experience, and a valid driver's licence. They must be willing to travel within the province and occasionally outside the region, and be able to bend, climb, squat, reach, kneel and lift up to 50 lbs.

  Electrical hand tools, Electrical power tools, Electrical testing devices

• 8j

  Manufacturing Technician - Test

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  Candidates need a technical diploma or equivalent mechanical or manufacturing experience, with engine assembly or testing experience preferred. Familiarity with MES systems, lifting equipment operation and safety protocols, and strong attention to detail are required.

  MES, Morphee, Gantry lifts, Cranes, Transporters, Torque tools

  8j

  Manufacturing Technician - Test

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  Candidates need a technical diploma or equivalent mechanical or manufacturing experience, with engine assembly or testing experience preferred. Familiarity with MES systems, lifting equipment operation and safety protocols, and strong attention to detail are required.

  MES, Morphee, Gantry lifts, Cranes, Transporters, Torque tools

• 8j

  Mechanical Designer

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  8+ ansCoolIT Systems asks for a mechanical engineering technology diploma or a related bachelor's degree, plus 8+ years of relevant experience, including 3 years designing or manufacturing physical hardware. Candidates need strong 3D CAD and drawing skills, and good communication.

  SolidWorks

• 8j

  Fire Alarm Technician, CUPE Local 4400

  Ontario

  37,05 $/hContrat

  

  Toronto Catholic District School Board

  3+ ansCandidates need 3 to 5 years of practical experience with conventional and addressable fire alarm systems, plus CFAA registration and a valid Ontario G licence. Working knowledge of electrical systems, the ability to read schematics and plans, and independent work are also required.

  PA systems, company vehicles

  8j

  HVAC Technician - CUPE Local 4400

  Ontario

  47,68 $/hTemps plein

  

  Toronto Catholic District School Board

  5+ ansCandidates need at least five years of HVAC and refrigeration servicing experience, a valid Gas Fitter License (G1), a Refrigeration and Air-Conditioning Systems Mechanic License (313A), and an Ozone Depletion Prevention (ODP) Certificate. A valid Ontario Class G driver's licence, a reliable vehicle and English proficiency are also required.

  Building Automation System (BAS), Wiring diagrams and blueprints

• 8j

  HVAC Journeyperson

  Sault Ste. Marie, ON

  Sur placeTemps plein

  

  DNM Group Ltd.

  5+ ansCandidates need a valid 313A Certificate of Qualification, at least 5 years of HVAC experience, a G2 Gas Technician License (G1 an asset) and ODP certification. Strong diagnostic and commissioning skills, safety focus, and the ability to mentor apprentices are required.

  electronic reporting tools

• 8j

  Electrical Engineer

  Windsor, ON

  Temps plein

  

  Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…

  8+ ansCandidates need an electrical engineering degree from an accredited university, a professional engineer licence or eligibility within six months, and at least 8 years of related experience with 3 to 5 years in facilities electrical design. Strong design, code compliance, project management and communication skills are essential.

  8j

  Electrical Engineer

  Kingston, ON +10

  Temps plein

  

  Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…

  10+ ansCandidates need a degree in electrical engineering, a professional engineer licence or eligibility within six months, and ten or more years of experience designing low and medium voltage electrical systems. They should also have project management, code compliance and team leadership experience, plus strong communication skills.

• 8j

  Driver, Roll Off

  Brampton, ON

  Sur placeTemps plein

  W

  WM

  1+ ansCandidates need at least one year operating a vehicle that requires a DZ and a Class A or B CDL with an air-brake endorsement. They must be 18 or older, read and speak English well enough to serve the public, and pass a drug screen and physical.

  Roll-off truck, Front, side or rear load lift attachments, DVIR

• 8j

  Electrical Design Coordinator

  Toronto, ON

  Sur placeTemps plein

  OT

  Ontario Transit Group

  3+ ansCandidates need a bachelor's degree in electrical engineering (master's preferred) and at least 3 years of detailed design experience on building or civil infrastructure projects. Knowledge of building design and Autodesk software such as Civil 3D, AutoCAD, Revit and BIM360 is required.

  Autodesk Civil 3D, AutoCAD, Revit, Autodesk Construction Cloud, BIM360

• 8j

  Installation Engineering Design Leader

  Toronto, ON

  100k–135k $/an

  

  Alstom

  10+ ansCandidates need an engineering degree or equivalent, with a P. Eng or the designation in progress, and at least 10 years of production experience in design, drafting or engineering. Railway site management and railway product knowledge, along with strong interpersonal, negotiation and team skills, are needed.

  MS Word, MS Excel, Outlook

• 8j

  Electricians

  Canada

  Temps plein

  

  Stelco Inc.: Stelco was born out of an era of tremendous change, and Canada’s steel company forged its reputation on adapting to customer needs.

  2+ ansCandidates need an Industrial Electrician Certificate of Qualification (442A) or a Construction and Maintenance Electrician Certificate of Qualification (309A), plus at least 2 years of industrial experience. They must handle heavy industrial conditions, extreme temperatures, lifting and shift work.

  test equipment, soldering equipment, burning equipment

  8j

  Heavy Equipment Mechanic

  Canada

  Temps plein

  

  Stelco Inc.: Stelco was born out of an era of tremendous change, and Canada’s steel company forged its reputation on adapting to customer needs.

  3+ ansStelco needs a certified heavy duty mechanic with a 421A certificate or a 310T truck and coach technician certificate, plus 3 to 5 years of experience. Candidates must handle a physically demanding, heavy industrial, shift-based workplace.

  Heavy equipment operation, Personal protective equipment, Assembly, Inspection, Mechanical systems, Housekeeping

• 8j

  Installation Engineering Design Leader

  Canada

  100k–135k $/an

  ?

  Delivers engineering studies (Bill of Installation Materials / Quantities, Method Statements, Installation Materials Specification Requirements, Installation drawings and configuration); Plans and schedules…

• 8j

  310s Automotive Technician

  Fort Erie, ON

  32–38 $/hSur placeTemps plein

  NR

  Northern Roads Auto Group

  Candidates need a valid 310S Automotive Service Technician Certificate of Qualification, strong mechanical and diagnostic skills, and an Ontario G driver's licence with a clean record. A high school diploma, the ability to lift up to 85 lbs, and good teamwork and communication skills are also required.

  diagnostic equipment, digital service records system

• 8j

  Field Service Technician

  Mississauga, ON +1

  HybrideTemps plein

  PT

  Pure Technologies Ltd.

  5+ ansCandidates need an engineering degree or engineering technologist diploma, up to 5 years of field experience, and strong mechanical aptitude. They must be a Canadian citizen or permanent resident with a valid driver's licence, and be willing to travel up to 75%.

  pipeline inspection equipment, hand tools

• 8j

  Electrician

  Hamilton, ON

  Sur placeTemps plein

  

  American Iron and Metal: American Iron & Metal (AIM) is a family-owned, Canada-based company founded in 1936.

  2+ ansCandidates need a Red Seal Industrial Electrician ticket (309A or 442A) and 2-5 years of heavy industrial work. Experience with high voltage switchgear, motor starters, PLCs (Siemens, Allen Bradley) and electrical testing equipment is needed, and a valid Ontario driver's licence is required.

  digital multimeter, megohm meter, process meter, thermography equipment, PLC, SCADA

16 entreprises