Emplois “Operate boiler” au Canada – Page 34

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Construction Project Manager

  Edmonton, AB

  Sur placeTemps plein

  

  ATCO

  5+ ansCandidates need 5-10 years of mechanical installation experience with a Plumbing/Gas Fitter Journeyman ticket, or 3-5 years with a P.Eng or CET designation. A Class 5 (non-GDL) driver's licence, familiarity with construction management software and willingness to travel and stay overnight are also required.

  Construction management software

  1 mois

  Construction Project Manager

  Calgary, AB

  Temps plein

  

  ATCO

  5+ ansCandidates need 5 to 10 years of mechanical installation experience with an HVAC Journeyman ticket, or 3 to 5 years with a P.Eng or CET designation. A Class 5 (non-GDL) licence, familiarity with construction management software, and willingness to travel across Alberta are required.

  Construction management software

• 1 mois

  Superintendent Recovery (Power Recovery Cogen)

  Edmundston, NB

  Temps plein

  

  Twin Rivers Paper Company LLC: Twin Rivers Paper Company, headquartered in Madawaska, Maine, is an integrated specialty paper manufacturer producing 400,000 tons of paper per year…

  5+ ansCandidates need a Class 2 Power Engineer certification (or be working toward one), 5 to 10 years of industrial experience, and team leadership and regulatory compliance experience. Bilingual French and English is an asset.

  Coordinate operational activities, Inspection, Regulatory compliance, Energy efficiency, Lead a team, Teamwork

• 1 mois

  Bilingual Risk Specialist, Equipment Breakdown & Boiler Inspection

  Montréal, QC

  Temps plein

  

  Sovereign

  5+ ansCandidates need at least 5 years in equipment breakdown insurance, risk engineering or boiler and pressure vessel inspection, plus an engineering or applied science degree or diploma or equivalent experience. French proficiency with good English is essential, and NBBI or IISP certification is required.

  Bilingualism, Inspection, Leadership, Underwriting, Think creatively, Coaching

• 1 mois

  Industrial Painter/Shipper

  Stratford, ON

  31,81 $/hTemps plein

  C

  Cleaver-Brooks: Cleaver-Brooks, Inc., a manufacturer of boiler room products for over 90 years, is the only single source manufacturer and supplier of boiler room…

  1+ ansCandidates need 1 to 2 years of industrial painting experience and the ability to operate paint spraying equipment. They should be able to run an overhead crane and a forklift (certified internally), use hand tools, and do basic computer tasks.

  paint spraying equipment, overhead crane, forklift, hand tools

  1 mois

  Industrial Welding Instructor

  Stratford, ON

  75k–90k $/anTemps plein

  C

  Cleaver-Brooks: Cleaver-Brooks, Inc., a manufacturer of boiler room products for over 90 years, is the only single source manufacturer and supplier of boiler room…

  Cleaver-Brooks needs a candidate with proven experience training, mentoring and evaluating welders, plus strong knowledge of ASME Sections I, IV, VIII and IX. A Certified Welder qualification under ASME Section IX is required, with a Red Seal or welding inspection certification as assets.

  Microsoft Office, training database systems, automated welding systems, hand tools, power tools

• 1 mois

  Maintenance Manager

  Burnaby, BC

  120k–150k $/anSur placeTemps plein

  

  Veolia Environnement SA

  5+ ansCandidates need at least five years of hands-on or supervisory maintenance experience, and a valid Red Seal certificate or working toward one. CMMS proficiency, thermal power plant experience and budget management are also required.

  CMMS, Microsoft Office, Windows

  1 mois

  Electrical and Instrumentation Technician

  Burnaby, BC

  61,16 $/hSur placeTemps plein

  

  Veolia Environnement SA

  5+ ansCandidates need a Red Seal or Interprovincial trade qualification as an Industrial Electrician and/or Instrumentation and Control Technician, plus at least five years of industrial experience. They must know PLCs, DCS and HMI systems, and be able to lift 50 lbs, climb to 75 feet and work in confined spaces.

  PLC, DCS, HMI, CMMS, Multimeter, Loop calibrator

• 1 mois

  Baker

  Squamish, BC

  Sur placeTemps plein

  

  Bridgemans Services

  Candidates need extensive culinary technique and food presentation knowledge, strong attention to detail, and valid MED Domestic Vessel Safety, Crowd and Crisis Management and marine medical certificates, which the employer helps arrange. A culinary diploma is preferred.

  Dough machine, Sheeter, Proofer, Ovens, Ranges, Fryers

  1 mois

  Second Cook

  Squamish, BC

  Sur placeTemps plein

  

  Bridgemans Services

  2+ ansCandidates need 2+ years of progressive cooking experience in high-volume kitchens or accommodation facilities. A culinary diploma, Foodsafe Level I, strong English communication, and willingness to work rotational shifts on board are preferred or required.

  industrial cooking ranges, ovens, fryers, griddles, boilers

• 1 mois

  Second Class Power Engineer

  Yorkton, SK

  Sur placeTemps plein

  

  Louis Dreyfus Company

  Candidates need a Second Class Boiler / Power Engineer ticket, a Grade 12 diploma or equivalent, and mechanical aptitude with basic computer skills. They must be comfortable at heights and in confined spaces, lift 50 lbs or more, and work rotating shifts.

  steam boiler, air compressor, cooling tower, refrigeration equipment, computer control systems

• 1 mois

  Piping Designer

  Fredericton, NB

  50k–70k $/anSur place

  CL

  CBCL Limited

  1+ ansCandidates need a diploma in mechanical engineering technology or a related program, one to five years of mechanical or piping design experience, and AutoCAD skills. AutoCAD Plant 3D is preferred and exposure to industrial systems is an asset.

  AutoCAD, AutoCAD Plant 3D, Inventor, SolidWorks, Revit

  1 mois

  Mechanical Engineer

  Fredericton, NB

  90k–135k $/anSur place

  CL

  CBCL Limited

  5+ ansCandidates need a Mechanical Engineering degree and P.Eng. registration or eligibility, plus at least five years of mechanical design or industrial project experience. Experience with pulp and paper or heavy industry, AutoCAD Plant3D, SolidWorks or Inventor, and a valid driver's licence is needed.

  AutoCAD Plant3D, SolidWorks

  1 mois

  Intermediate to Senior Piping Designer

  Fredericton, NB

  80k–105k $/anSur place

  CL

  CBCL Limited

  Candidates need a diploma in mechanical engineering technology or design, or equivalent experience, plus intermediate to senior experience on industrial mechanical or piping projects. They must be proficient in AutoCAD and Plant 3D, able to complete quantity take-offs, and hold a valid driver's licence.

  AutoCAD, AutoCAD Plant 3D, Inventor, SolidWorks, Revit

• 1 mois

  Plumber Position – Cochrane Area

  Cochrane, AB

  Sur placeTemps plein

  GH

  Groupe Helios

  2+ ansCandidates need a Red Seal journeyman plumber credential and about two years of experience, with troubleshooting skills for heating systems and piping. They must communicate well, solve problems under pressure, work with minimal supervision and pass RCMP and federal criminal record checks.

  drain cleaning equipment, mechanical and electrical drawings

  1 mois

  Plumber

  Cochrane, AB

  Sur placeTemps plein

  GH

  Groupe Helios

  1+ ansAQUATECH needs a plumber with one or more years of construction or industrial plumbing experience, plus troubleshooting skills, strong problem-solving and good written and verbal communication. Candidates must pass RCMP and federal criminal record checks and be available for after-hours call-outs.

  drain cleaning equipment

• 1 mois

  Maintenance Supervisor – Greenhouse Operations (Bilingual English/Spanish Required)

  Abbotsford, BC

  Sur placeTemps plein

  RF

  Randhawa Farms Ltd.

  5+ ansCandidates need 5+ years of maintenance experience in greenhouse, food processing or industrial settings, plus supervisory experience. Fluency in English and Spanish, strong mechanical, electrical and troubleshooting skills, and a valid driver's licence are required.

  i2i Proteus, PLC, boilers, pumps, HVAC equipment, irrigation systems

• 1 mois

  Lead Controls Engineer

  Toronto, ON

  Sur placeTemps plein

  

  Armstrong Fluid Technology: With advanced solutions that leverage edge computing, IoT, machine learning, digital twin technology and demand-based control, Armstrong provides…

  10+ ansCandidates need a Bachelor's degree in an engineering discipline, a P.Eng designation and at least 10 years of industrial control experience. Strong closed-loop control, embedded cybersecurity and formal change management skills are required.

  MATLAB, Simulink, PLC, BACnet, Modbus, MQTT

• 1 mois

  Heavy Duty Mechanic

  Alberta

  Sur placeTemps plein

  

  GS Construction

  3+ ansCandidates need a Journeyperson Truck and Transport Mechanic or Heavy Equipment Technician certification, with Red Seal preferred, and at least 3 years maintaining commercial trucks and trailers. A valid Class 5 licence is required, and a Class 1 or 3 with air brake endorsement, CVIP authorization and off-road experience are assets.

  service truck, diagnostic tools

• 1 mois

  Building Technician (Commercial)

  Ottawa, ON

  Sur placeTemps plein

  

  Regional Group

  3+ ansCandidates need 3 to 5 years of related experience or a BOMA SMT/SMA or building technician certificate. They must know building automation and electrical and mechanical systems, use Outlook and Excel, and hold a valid driver's licence.

  Outlook, Excel, MRI Angus Anywhere, building automation system

• 1 mois

  JC Boiler - Industrial Combustion & Boiler Service Technician

  Nisku, AB

  Sur placeTemps plein

  

  Intricate Group: Regulatory services provider of consulting, field services and software

  Candidates need a valid Alberta Journeyperson Gasfitter Class B, hands-on burner and combustion troubleshooting experience, working knowledge of electrical controls, and a valid driver's licence. Oil-and-gas or industrial service experience and a willingness to travel and take on-call duty are also required.

  burner management system, combustion analyzer, PLC, VFD

• 1 mois

  Senior Mechanical CAD Designer

  Mississauga, ON

  Temps plein

  

  AtkinsRéalis

  10+ ansCandidates need a college diploma or equivalent experience with at least 10 years in mechanical design and drafting. Working knowledge of SmartPlant 3D is required, along with AutoCAD, Plant 3D, MicroStation, Navisworks and SolidWorks; ASME Code knowledge is an asset.

  AutoCAD, AutoCAD Plant 3D, AutoCAD Raster Design, Navisworks Manage, SolidWorks

• 1 mois

  Red seal Maintenance Millwright

  Abbotsford, BC

  Sur placeTemps plein

  

  North West Rubber: The company owns and operates manufacturing facilities in British Columbia, Ontario, Texas and China.

  2+ ansCandidates need a verified Red Seal Millwright certification and 2 to 5 years of manufacturing experience. Advanced mechanical ability, welding experience, the ability to work unsupervised, and comfort with shift work are also needed.

  Power tools, Welding equipment, Forklift, Skid steer

• 1 mois

  Systems Technician

  Yellowknife, NT

  Sur placeTemps plein

  AK

  Arctic Kingdom Wilderness Operations Inc

  Candidates need hands-on mechanical and infrastructure experience, ideally in a remote camp, lodge or outdoor setting. They also need a valid driver's licence, Wilderness First Aid, wildlife awareness training, and comfort operating snowmobiles or ATVs.

  Generators, Boilers, Snowmobiles, ATVs

17 entreprises