Emplois “Pneumatic systems” au Canada – Page 34

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 29j

  Field Supervisor

  British Columbia

  75–95 $/h

  

  WSG Energy Services: WSG Energy Services is a global specialist service provider to traditional and new clean energy infrastructure.

  7+ ans3+ gestionCandidates need at least 7 years of industrial construction, commissioning, maintenance, or pressure testing experience and 3 years of supervisory experience on major projects. Strong knowledge of hydrostatic and pneumatic testing, permits, lockout/tagout, and reading P&IDs is required, plus a valid driver's licence.

  Microsoft Office, P&ID, engineering drawings

  29j

  HSSE Officer

  British Columbia

  

  WSG Energy Services: WSG Energy Services is a global specialist service provider to traditional and new clean energy infrastructure.

  5+ ansCandidates need a diploma or degree in occupational health and safety or a related field and at least 5 years of HSSE experience on industrial construction, commissioning or maintenance projects. Strong knowledge of pressure testing, energy isolation, confined space, hot work and permit systems is required.

  Microsoft Office, Electronic HSSE reporting systems

  29j

  Apprentice Mechanic (3rd or 4th year)

  Leduc, AB

  

  WSG Energy Services: WSG Energy Services is a global specialist service provider to traditional and new clean energy infrastructure.

  WSG Energy Services needs a registered 3rd or 4th year heavy duty apprentice with prior heavy equipment repair experience, a Class 5 licence, and a strong commitment to safety. Oilfield equipment experience is preferred.

  hydraulic systems, pneumatic systems, nitrogen pumping units, coiled tubing equipment

• 29j

  Maintenance Technician

  Regina, SK +2

  

  Sofina Foods Inc

  2+ ansSofina Foods needs candidates with industrial maintenance experience, ideally two to five years, and a technical diploma or certificate in a related field. Candidates must communicate in English, work with little supervision, and be reliable.

  boiler, generator, compressor, incubator

  29j

  Journeyman Tradesperson – Millwright

  Edmonton, AB

  Temps plein

  

  Sofina Foods Inc

  2+ ansCandidates need a Provincial Millwright Journeyman certificate or Red Seal equivalent and two years of maintenance experience in manufacturing. Strong troubleshooting, welding, fabrication and machining skills are needed, along with clear English communication and a strong commitment to safety.

  Power tools, Hand tools

  29j

  Licensed Industrial Mechanic Millwright (433A)

  Toronto, ON

  42,45–43,45 $/h

  

  Sofina Foods Inc

  Sofina Foods needs a licensed Ontario 433A Millwright with proven experience in a manufacturing environment. Candidates need strong troubleshooting skills, the ability to read technical drawings and manuals, and good English communication.

  CMMS, industrial power tools, TIG welding equipment

  29j

  Journeyman Tradesperson

  Edmonton, AB

  Temps plein

  

  Sofina Foods Inc

  2+ ansCandidates need a valid Provincial Millwright Journeyman Certificate or an interprovincial equivalent, plus at least two years of repair work in a manufacturing setting. Sofina Foods also wants mechanical, welding, fabrication and machining experience, and the ability to communicate in English.

  power tools, manual tools

  29j

  Refrigeration/Maintenance Technician

  Brampton, ON

  40 $/h

  

  Sofina Foods Inc

  Candidates need a valid Refrigeration Operator Class B or 3rd Class Operating Engineer certificate, plus experience with ammonia compressors, refrigeration equipment and coil tube boilers. They must be willing to work all shifts and extended hours, and read and speak English.

  ammonia compressors, coil tube boilers, cooling towers, air compressors, duty phone, radio

• 29j

  Senior Automation Technician

  Toronto, ON

  GA

  Give and Go Foods

  5+ ansGive and Go Foods needs candidates with 5 to 10 years of industrial automation or controls maintenance experience, hands-on PLC and robotics troubleshooting, and a 442A Industrial and Maintenance Electrical License. Candidates must read electrical schematics and ladder logic and work with CMMS and SAP.

  PLC, HMI, VFD, servo motor, robot, CMMS

• 29j

  Mechanical Assembler

  Châteauguay, QC

  

  CMP Advanced Mechanical Solutions: CMP Advanced Mechanical Solutions is a Manufacturing Services company providing Electro-Mechanical Solutions that enable disruptive Technology…

  Candidates need manufacturing or similar experience, skill with pneumatic and electric tools, and good manual dexterity and attention to detail. They must be able to lift 50-pound metal pieces and meet deadlines.

  Pneumatic tools, Electric tools, Computer

• 29j

  Vehicle Maintenance (HD mechanic)

  Panorama, BC

  

  Panorama Mountain Village

  5+ ansCandidates need a Journeyman Heavy Duty Mechanic certification, a high school diploma or equivalent, and about five years of heavy machinery experience. Snowcat or ski-industry experience is preferred, along with strong skills in hydraulics, electrical systems, diesel and gas engines, welding and schematic reading.

  welding equipment, machine shop tools, schematic drawings, MSDS

• 29j

  Electro-Mechanical Technician

  Burnaby, BC

  

  Kodak: A leading global manufacturer focused on commercial print and advanced materials & chemicals.

  2+ ansCandidates need at least 2 years of experience manufacturing complex electromechanical products, with both assembly and integration experience. They need strong mechanical troubleshooting, PCB-level electronics repair, soldering skills, and familiarity with cable and pneumatic routing.

  CAD drawings, pneumatic drawings

• 29j

  310T Lead Hand

  Ayr, ON

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  5+ ansCandidates need a valid 310T Truck and Coach licence, advanced knowledge of commercial vehicle electrical, hydraulic, pneumatic and computer diagnostic systems, and ideally 5+ years of heavy equipment maintenance experience. Prior lead hand or supervisory experience in a heavy-duty shop is a strong asset.

  Fleet maintenance software, Computer diagnostic tools, Welding equipment, Own hand tools

  29j

  Truck Mechanic

  Dartmouth, NS

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  GFL Environmental needs candidates with a Truck and Transport Red Seal certification or who are nearing completion of it. Candidates also need a valid driver's licence with a clean driving record and must be able to lift up to 50 lbs repeatedly.

  Hydro-vac, Vac truck, Tanker, Roll-off, Box truck, Flat deck trailer

• 29j

  Assembler

  Brantford, ON

  19–21 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of hands-on experience in manufacturing, mechanical assembly or heavy warehouse production. They must be comfortable with air and power tools, read step-by-step schematics, stand for full 8-hour shifts and lift 30 to 50 lbs.

  pneumatic tools, power drivers, hand tools

  29j

  Powder Coat technician- Day Shift

  Guelph, ON

  24–24,75 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need a post-secondary diploma or certificate in chemical or mechanical technology, or related experience, plus at least 2 years maintaining automated powder coating equipment in manufacturing. They must understand electrostatic powder coating, lift 20 to 40 lb boxes, and communicate well in spoken and written English.

  powder pumps, powder booth, pneumatic lift equipment

  29j

  Buffing / Grinding Operator

  Guelph, ON

  21,53 $/hContrat

  

  Randstad Canada

  Candidates need proven experience with buffing, grinding and metal-finishing tools in a plant or industrial setting, plus practical overhead crane experience. A strong safety focus, reliable transportation to Guelph, and willingness to work overtime are also required.

  Angle grinder, Die grinder, Pneumatic buffer, Overhead crane

  29j

  Metal Finisher and Grinding Operator

  Guelph, ON

  21,53 $/hContrat

  

  Randstad Canada

  Candidates need hands-on metal finishing or fabrication experience, safe overhead crane experience, and a commitment to safety and PPE. Reliable transportation, flexibility for overtime, and fluent English are also required.

  Pneumatic hand buffer, Angle grinder, Die grinder, Overhead crane

  29j

  Powder Coat technician- Afternoon Shift

  Guelph, ON

  24–24,60 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need a post-secondary diploma or certificate in chemical or mechanical technology, or related work experience, plus at least 2 years maintaining automated powder coating equipment. They also need to lift 20 to 40 pound powder boxes and communicate well in English.

  GEMA powder application system, Reciprocators, Powder pumps, OptiCenter, Magic Booths, Powder recovery systems

• 29j

  Electrician

  Hamilton, ON

  AM

  Avl manufacturing

  5+ ansCandidates need an interprovincial Red Seal Industrial Electrician certification (309A or 442A) and at least 5 years of industrial experience. Basic PLC programming, control panel knowledge and the ability to travel within North America with a valid passport and driver's licence are also needed.

  PLC, Conduit, Switchgear, Electrical drawings

• 29j

  Truck Mechanic

  Dartmouth, NS

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a Truck and Transport Red Seal certification or to be nearing completion of its requirements. They also need a valid driver's licence with a clean driving record and must be able to lift up to 50 lbs repeatedly.

  hydro-vac, vac truck, tanker, roll-off truck, flat deck trailer, box truck

• 29j

  310T Licensed Truck & Trailer Mechanic

  Brampton, ON

  Temps plein

  

  JDI

  2+ ansCandidates need a 310T Truck and Coach Technician licence and two or more years of hands-on experience after certification, preferred. They should understand diesel engines, aftertreatment and electrical diagnostics, and air brake systems, and be able to read technical manuals and schematics.

  diagnostic tools

• 29j

  Mechanical Engineer

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  5+ ansCandidates need a mechanical engineering degree, a P.Eng. or eligibility in Ontario, and at least 5 years of design or nuclear-related experience. They also need CAD skills and the ability to obtain security clearance.

  SolidWorks, Solid Edge

  29j

  Engineered Tooling (TM) - Technicians/Technologists

  Mississauga, ON

  Temps plein

  CE

  Candu Energy Inc.

  2+ ansCandidates need a diploma in mechanical engineering technology or industrial maintenance and 2-5 years of tooling, maintenance or field services experience. Candidates also need strong mechanical aptitude, the ability to read engineering drawings, and the ability to obtain security clearance.

  hand tools, shop equipment, measuring instruments, forklift, overhead crane

12 entreprises